Top 24 Step Pulleys

 

JET 692192 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X- and Y-Axis Powerfeed

JET 692192 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeed

JET 692192 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeed - Certified meehanite castings. Large diameter quill is chromed. Precision bored and honed milling head. Spindle head is internally cooled. High precision class 7 spindle bearings.

 

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press 15 Swing 12 hp 120240V 1 Phase

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press, 15″ Swing, 1/2 hp, 120/240V, 1 Phase

Palmgren 9680158 Heavy Duty 16-Speed Bench Step Pulley Drill Press, 15″ Swing, 1/2 hp, 120/240V, 1 Phase - Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations. Extended quill/spindle travel ideal for deep hole applications. Maximum spindle run out of 00005″. Quick change vertical depth stop for accurate, repeatable feed length. Led readout for spindle speeds.

 

JET 692199 9 in x 42 in Step Pulley Mill with 3-Axis Newall DP500 DRO Quill with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds

JET 692199 9 in. x 42 in. Step Pulley Mill with 3-Axis Newall DP500 DRO (Quill) with X- and Y-Axis Powerfeeds - High precision class 7 spindle bearings. Large diameter quill is chromed. Spindle head is internally cooled. Precision bored and honed milling head. Certified meehanite castings.

 

Palmgren 9680177 Heavy Duty 16-Speed Floor Step Pulley Drill Press 17 Swing 1 hp 120240V 1 Phase

Palmgren 9680177 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 120/240V, 1 Phase

Palmgren 9680177 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 120/240V, 1 Phase - Extended quill/spindle travel ideal for deep hole applications. Led readout for spindle speeds. Quick change vertical depth stop for accurate, repeatable feed length. Maximum spindle run out of 00005″. Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations.

 

Palmgren 20 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press - Rack and pinion table raiser. Fully enclosed spindle with a maximum run out of 0005″ for accurate drilled holes. Rack and pinion table raiser easily positions the work piece and fixture at proper height. 12-speeds, digital depth and rpm readout, 6″ spindle travel.

 

V-Belt Pulley 6 In OD 58 Bore 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step

V-Belt Pulley, 6 In OD, 5/8 Bore, 4 Step - V-belt pulley, 4 step fixed bore, bore dia. 6, 5, 4, 3 in. 5/8 or 1/2 in. Will fit a 5/8″ or 1/2″ dia. Use only one 4l or a section v-belt per pair (or set). Shaft. 15″ less than outside dia. Pitch dia. Is 0. , 4 groove, die cast (zamak #3) material, for use with one 4l or a section v-belt per pair (or set), includes reducer bushing 3- and 4-step die-cast sheavesbore and grooves are machined together to provide high concentricity. Zamak/zinc alloy reducer bushing included solid construction. Use in pairs (1 inverted), in any combination, for effective speed regulation. 5/8 or 1/2 in. , Outside dia. , Fits shaft dia.

 

8x36 Step Pulley Milling Machine

8×36 Step Pulley Milling Machine

8×36 Step Pulley Milling Machine - Precision bored and honed milling head high precision spindle bearings over 10″ of front to back ram travel large diameter quill is chromed locks on all movable surfaces hardened and ground precision table head tilts left or right equipped with one-shot lubrication system way covers draw bar tool box and tools.

 

JET 692195 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds

JET 692195 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds

JET 692195 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeeds - Precision bored and honed milling head. Large diameter quill is chromed. High precision class 7 spindle bearings. Certified meehanite castings. Spindle head is internally cooled.

 

3 516 - Diameter 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

3 5/16″ – Diameter 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

3 5/16″ – Diameter 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 2nd step = 2 1/2″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 1st step = 1 15/16″. Manufacture = congress. 3rd step = 3 5/16″.

 

JET 692187 9 in x 42 in Step Pulley Mill with Newall DP500 DRO

JET 692187 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO

JET 692187 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO - High precision class 7 spindle bearings. Precision bored and honed milling head. Large diameter quill is chromed. Certified meehanite castings. Spindle head is internally cooled.

 

4 Diameter - 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress by CONGRESS DRIVES

4 Diameter – 3 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES

4 Diameter – 3 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES - Rack and pinion table raiser easily positions the work piece and fixture at proper height. 12-speeds, digital depth and rpm readout, 6″ spindle travel. Rack and pinion table raiser. 4 diameter, 3 step pulley 1/2, 5/8 fixed bore, die cast by congress.

 

Step Pulley Mill Machine 2 HP 3 PH 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V

Step Pulley Mill Machine, 2 HP, 3 PH, 230 V - . Three-stage power down feed with auto stop, high precision class 7 spindle bearings and the rugged stability of meehanite castings ensures you get everything you need from the jtm-1 and 2 models. The internally cooled spindle head prevents seizing, and jet precision engineering ensures superior results with all the features you’ve come to expect and is backed by the industry-leading jet two year warranty.

 

JET 692194 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692194 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692194 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed - Precision bored and honed milling head. Certified meehanite castings. Spindle head is internally cooled. High precision class 7 spindle bearings. Large diameter quill is chromed.

 

JET 692189 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed

JET 692189 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed

JET 692189 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X- and Y-Axis Powerfeed - Precision bored and honed milling head. Certified meehanite castings. Large diameter quill is chromed. High precision class 7 spindle bearings. Spindle head is internally cooled.

 

5 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

5″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

5″ Diameter – 4 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - 3rd step = 4″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 2nd step = 3″. 1st step = 2″. 4th step = 5″.

 

Palmgren Radial Arm - 5 Speed Floor step pulley drill press

Palmgren Radial Arm – 5 Speed Floor step pulley drill press

Palmgren Radial Arm – 5 Speed Floor step pulley drill press - Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Keyed 5/8-inch chuck with jt3 taper with drilling capacity of 5/8-inch in case iron. Radial arm design with swing from 9 to 33″, tilting head and table. Head tilts 90-degree right and left with spindle travel of 315-inch.

 

JET 692193 9 in x 42 in Step Pulley Mill with Newall DP500 DRO

JET 692193 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO

JET 692193 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO - Spindle head is internally cooled. Certified meehanite castings. Precision bored and honed milling head. High precision class 7 spindle bearings. Large diameter quill is chromed.

 

CH Hanson Palmgren Machine 9680341 Radial Arm - 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press

CH Hanson Palmgren Machine 9680341 Radial Arm – 5 Speed Bench step pulley drill press - Palmgren radial arm, 5 speed bench step pulley drill press. Head tilts 90-degree right and left with spindle travel of 315-inch. Swing depth from 9-inch to 33-inch (45-inch to 165-inch from spindle to column). Radial arm design with swing from 9 to 33″, tilting head and table.

 

Palmgren 20 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press

Palmgren 20″ 12-Speed Floor step pulley drill press - This drill delivers performance and reliability at an economical price. 0005″ for accurate drilled holes. Cast iron head, table and base maximum spindle runout of 0. Production duty drill press designed and built to handle a wide variety of uses from general purpose drilling applications to production jobs. Fully enclosed spindle with a maximum runout of. 0005″ extended quill travel rack and pinion table raiser spindle depth stop front mounted push button on/off switch heavy duty, precision ground, t-slotted work table with coolant trough heavy duty spindle bearings drill chuck and arbor.   [custom1] specification description model 80329 swing 20 in motor hp 1 hp voltage 115/230 amps 16/8 a capacity cast iron 1 in spindle speeds 12 rpm 140 to 2600 spindle taper mt3 spindle travel 5 in spindle to table 26 in table work surface 13×15 in table slots 5/8 in height 70 width 23. Rack and pinion table raiser easily positions the work piece and fixture at the proper height. 5 in depth 33 in [/custom1].

 

4 Diameter - 3 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress

4″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress

4″ Diameter – 3 Step Pulley 1/2″ – 5/8″ Fixed Bore – Die Cast by Congress - Manufacture = congress. 2nd step = 3″. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 1st step = 2″. 3rd step = 4″.

 

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press 17 Swing 1 hp 240V 3 Phase

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 240V, 3 Phase

Palmgren 9680178 Heavy Duty 16-Speed Floor Step Pulley Drill Press, 17″ Swing, 1 hp, 240V, 3 Phase - Led readout for spindle speeds. Maximum spindle run out of 00005″. Extended quill/spindle travel ideal for deep hole applications. Quick change vertical depth stop for accurate, repeatable feed length. Fully enclosed spindle with spaced bearings for maximum spindle support and accurate drilling operations.

 

5 Diameter - 4 Step Pulley 12 - 58 Fixed Bore - Die Cast by Congress by CONGRESS DRIVES

5 Diameter – 4 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES

5 Diameter – 4 Step Pulley 1/2 – 5/8 Fixed Bore – Die Cast by Congress by CONGRESS DRIVES - 5 diameter, 4 step pulley 1/2, 5/8 fixed bore, die cast by congress. 2nd step = 2 1/2″. Manufacture = congress. Fits 1/2″ & 5/8″ shaft, reducer bushing included. 3rd step = 3 5/16″.

 

JET 692188 9 in x 42 in Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692188 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed

JET 692188 9 in. x 42 in. Step Pulley Mill with Newall DP500 DRO with X-Axis Powerfeed - Precision bored and honed milling head. Spindle head is internally cooled. Large diameter quill is chromed. High precision class 7 spindle bearings. Certified meehanite castings.

 

Palmgren 12 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press

Palmgren 12″ 16- Speed Bench step pulley drill press - A wider range of operation speeds for drilling both large and small holes. The oversized, massive drill heads have widely spaced bearing surfaces that provide full quill support throughout its travel. Fully enclosed spindle for accurate drilling operations maximum spindle run out of 00005″. They have the weight and rigidity to maintain the built-in tight tolerances required for metalworking applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.