Top 24 Attachment Tools

 

16 Gauge Metal Cutting TurboShear Drill Attachment Tools Equipment Hand Tools

16 Gauge Metal Cutting TurboShear Drill Attachment Tools Equipment Hand Tools

16 Gauge Metal Cutting TurboShear Drill Attachment Tools Equipment Hand Tools - Clearance between the shear’s cutting inserts may be adjusted as necessary for optimal performance in 16 to 26-gauge (1. 76 m) in 16-gauge (1. Insert cutting life is rated at 1,200-ft (365. The unit’s driveshaft inserts into a 3/8-in. 52, 0. Cutting life increases dramatically when averaged over cuts in a variety of steel thicknesses. An aluminum cast shear head and telescoping drill clamp offer one-handed control. The shear head may also be safely gripped for additional support. The compact molded polymer clamp adjusts for both length and width of any drill housing. (12. 4-volt, versatile cordless drill or maximum 7-amp a/c drill. This product meets the large package requirement per ups/fedex. 7 mm) chuck. 46 mm) steel. The four-sided cutting inserts are designed to be rotated to maximize life before replacement. Features and benefits 16-gauge steel capacity sure one-handed control fits both length and width of any drill housing adjustable head angle easy blade replacement rated for cutting automotive grade sheet steel including trunk pans and floor boards, this turboshear quickly attaches to a minimum 14. (10 mm) or 1/2-in. The estimated shipping cost will include this fee. 52 mm) steel using four edges of inserts. A helical shaped foot permits easy left, right or straight cuts, and a 5-position head accesses cuts through profiles and into tight spaces. Inserts are accessible without disassembly of shear head and are easily replaced on the job.

 

Turbo-X-Tools Hemming Drill Attachment Tools Equipment Hand Tools

Turbo-X-Tools Hemming Drill Attachment Tools Equipment Hand Tools

Turbo-X-Tools Hemming Drill Attachment Tools Equipment Hand Tools - A narrow seaming wheel fits flush against the anvil fence to provide a tight, clean hemmed door edge. A telescoping clamp adjusts to fit length and width of any drill housing. The malco dh hemming tool attachment is resistant to solvents and is easily cleaned of the adhesive used between the door skin and panel. Features and benefits hem door skins with speed and precision attaches to standard corded or cordless drill will not mar or scratch door skin finish resistant to solvents safe, controlled operation the drive shaft of this power-assisted turbo-x-tool dh hemming attachment inserts into the chuck of a minimum 14. The installed hemming attachment is easily operated with one hand. For best results, keep the anvil of the hemming attachment flush against the outer edge and finished side of the door skin. The high impact, abs polymer anvil will not scratch or mar the replacement door skin. Efficiently hem the edges of replacement door skins for passenger vehicle and light trucks with limited manual “tacking” requirements. This product meets the large package requirement per ups/fedex. Slightly angling the upright lip of the replacement door skin with a hammer and dolly and flattening the point of entry will ensure smooth operation. 4 volt cordless or maximum 7 amp a/c drill. The estimated shipping cost will include this fee. Remove the old door skin and prep the door as usual.

 

Slide Hammer Attachment Tools Equipment Hand Tools

Slide Hammer Attachment Tools Equipment Hand Tools

Slide Hammer Attachment Tools Equipment Hand Tools - This is a special order item. Specs weight 0. You will have a complete tool to make light pulls. A. 7 lbs. The estimated shipping cost will include this fee. S. 2-4 weeks to be shipped. This product also meets the large package requirement per ups/fedex. Features and benefits screw this adapter on the end of your slide hammer, attach 4055 7/16″ screw pin shackle, connect to any mo-clamp pulling tool. Orders can take approx. This product meets the oversized requirement per ups/fedex. The shipping weight reflected is the dimensional weight.   Works well when your main pulling machine is tied up or you simply want a quick pull heat-treated steel rugged design for a long and stronger tool life made in the u.

 

3M DBI-SALA Fall Protection For Tools 1500014Tool Cinch Attachment For Tools Up To 35-Pounds WSingle Wing To Keep Attachment Point From Traveling 10-Pack by 3M Fall Protection Business

3M DBI-SALA Fall Protection For Tools, 1500014,Tool Cinch Attachment, For Tools Up To 35-Pounds, W/Single Wing To Keep Attachment Point From Traveling, 10-Pack by 3M Fall Protection Business

3M DBI-SALA Fall Protection For Tools, 1500014,Tool Cinch Attachment, For Tools Up To 35-Pounds, W/Single Wing To Keep Attachment Point From Traveling, 10-Pack by 3M Fall Protection Business - 3m dbi-sala fall protection for tools, 1500014,tool cinch attachment, for tools up to 35-pounds, w/single wing to keep attachment point from traveling, 10-pack. 10-pack.

 

The Gorilla Torque Bar Locking Plier Attachment Tools Equipment Hand Tools

The Gorilla Torque Bar Locking Plier Attachment Tools Equipment Hand Tools

The Gorilla Torque Bar Locking Plier Attachment Tools Equipment Hand Tools - The estimated shipping cost will include this fee. . Features and benefits double the torque of your locking plier double the reach of your locking plier heat-treated alloy steel fits most popular locking pliers inexpensive way to make locking pliers more useful this product meets the large package requirement per ups/fedex.

 

V Ring Attachment - Tool Cinch Dual - Medium Duty-10 Pack

V Ring Attachment – Tool Cinch Dual – Medium Duty-10 Pack

V Ring Attachment – Tool Cinch Dual – Medium Duty-10 Pack - Heavy duty nylon webbing. Unique cinch design allows user to simply “cinch, secure, and continue work”. Tools or less. 10 pack. Heavy duty polyester twist multifilament bar tac stitching. (Prevents attachment point from traveling once it is cinched to the tool). Dual heavy duty nylon wings with dual triple fold catch tab. 3rd party tested for 35 lbs. Heavy duty 1 3/4″ forged v-ring powder coated.

 

Vacuum Cleaner Dust Dusting Brush Attachment Tool Black Natural Soft Bristle

Vacuum Cleaner Dust Dusting Brush Attachment Tool Black Natural Soft Bristle

Vacuum Cleaner Dust Dusting Brush Attachment Tool Black Natural Soft Bristle - Designed, tested and made in the usa, (hardware imported, we wish we could get it here to). Vacuum cleaner dust dusting brush attachment tool black natural soft bristle#oo71/93. Produced in the usa with strict quality programs in place for your piece of mind. 33″ long with 24″ of very light force elongation minimizes pulling on your tool when reaching out. Cord stop and carabiner included for versatility of attachment of tools.

 

Magswitch Vertical Featherboard Attachment Vertical Featherboard Attachment Magswitch Model Vertical Featherboard Attachment Tools Hardware store

Magswitch Vertical Featherboard Attachment Vertical Featherboard Attachment Magswitch, Model: Vertical Featherboard Attachment, Tools & Hardware store

Magswitch Vertical Featherboard Attachment Vertical Featherboard Attachment Magswitch, Model: Vertical Featherboard Attachment, Tools & Hardware store - Vertical hold down for added safety against kick back. Versatile attachment tool which can be tailored to your own uses. Use in either vertical or horizontal position for superior workholding. Built from strong and durable abs ul94vo material for years of use.

 

BLACKDECKER BDCMTO Matrix Oscillating Tool Attachment

BLACK+DECKER BDCMTO Matrix Oscillating Tool Attachment

BLACK+DECKER BDCMTO Matrix Oscillating Tool Attachment - Accepts variety of b&d accessories (sold separately), cuts drywall, metal, wood, plastic, composite and many other materials. Tool-free blade release makes accessory changes quick and easy, the quick release lever eliminates the need for a hex key. For use with black+decker bdedmt and bdcdmt112. Opm (12v max = 0-14500, 20v max = 0-18500 and ac 4a = 0-16000).

 

Pair of ModStock Car Race Roll Around Attachments Tools Equipment Hand Tools

Pair of Mod/Stock Car Race Roll Around Attachments Tools Equipment Hand Tools

Pair of Mod/Stock Car Race Roll Around Attachments Tools Equipment Hand Tools - A. 2-4 weeks to be shipped. This is a special order item. Orders can take approx. This product is made for vehicles with locking axles. Makes moving your race care without wheels a breeze. S. Features and benefits fits most modified and stock race cars attaches to 12″ auto dolly (auto dolly not included) smooth red finish heavy duty steel made in the u. This product meets the large package requirement per ups/fedex. The race roll around attaches to a 12″ auto dolly (auto dolly not included) and bolts directly to your modified race car or stock race car. The estimated shipping cost will include this fee. Work smarter not harder using the merrick race roll around.

 

Air Shears Attachment Tools Equipment Hand Tools

Air Shears Attachment Tools Equipment Hand Tools

Air Shears Attachment Tools Equipment Hand Tools - This product also meets the large package requirement per ups/fedex. Orders can take approx. The estimated shipping cost will include this fee. The shipping weight reflected is the dimensional weight. 2-4 weeks to be shipped. . This product meets the oversized requirement per ups/fedex. Air shears attachment this is a special order item.

 

Cabinet Makers Wood Woodworker`s Vise For Wooden Workbench Attachment Tool Kit

Cabinet Makers Wood Woodworker`s Vise For Wooden Workbench Attachment Tool Kit

Cabinet Makers Wood Woodworker`s Vise For Wooden Workbench Attachment Tool Kit - Vise has all the working hardware for a very strong large capacity bench vise simply. Add your own wooden jaw wooden handle and mounting hardware overall size is 19 1/4 long”. X 10 1/4 wide screw size is 1 3/16″ diameter x 15 1/2″ long specifications 19-1/4″”. If you`re building your own cabinet maker`s bench this heavy-duty steel and cast iron front. Long 10-1/4 wide 15-1/2″ screw length 1-3/16″ screw diameter ships same day if paid for by”.

 

3M DBI-SALA Python 1500018Tool Cinch Attachment For Tools Up To 80  lbs wDual Wings To Keep Attachment Point From Traveling 10-Pack

3M DBI-SALA Python, 1500018,Tool Cinch Attachment, For Tools Up To 80 lb.s, w/Dual Wings To Keep Attachment Point From Traveling, 10-Pack

3M DBI-SALA Python, 1500018,Tool Cinch Attachment, For Tools Up To 80 lb.s, w/Dual Wings To Keep Attachment Point From Traveling, 10-Pack - Suitable for many large tools weighing up to 80 lb (363 kg), including magbase drills, rivet busters, and slugging wrenches. Two stabilization wings can be secured to a tool using quick wrap tape to prevent the tool cinch from slipping during use. Simply pass the attachment point through a closed handle on a tool, then pass the ring end through he loop end to create a power cinch. V-ring attachment point, 80 lb (363 kg) capacity, stabilization wing.

 

Needle Scale Attachment Tools Equipment Hand Tools

Needle Scale Attachment Tools Equipment Hand Tools

Needle Scale Attachment Tools Equipment Hand Tools - The estimated shipping cost will include this fee. Orders can take approx. This product also meets the large package requirement per ups/fedex. This product meets the oversized requirement per ups/fedex. . Needle scale attachment this is a special order item. 2-4 weeks to be shipped. The shipping weight reflected is the dimensional weight.

 

MaximalPower MiniMicro Vacuum Cleaner Attachment Tool Kit 8 Pcs Set

MaximalPower Mini/Micro Vacuum Cleaner Attachment Tool Kit 8 Pcs Set

MaximalPower Mini/Micro Vacuum Cleaner Attachment Tool Kit 8 Pcs Set - The tapper’s smallest size is 29mm (1. Note universal kit has a 2-sided adapter tube, with 3-step tapper on one side & progressive tapper on the other. Please ensure this size can fit either over or inside your vacuum hose and/or attachments. Finally you can clean those hard to reach areas, like in between the keys of a keyboards, inside the vents and fans of a computers, inside the vents and in between the seats of your car, in your speakers and stereo equipment, and much more 4. Two piece adapter tube slides on easily to almost any vacuum hose, making for a simple installation and quick cleaning 3. Each tool uses this hose which is connected to the one of the two adapter tubes. 50″). 15″) and its largest size is 38mm (1. It works with bissell, dirt devil, dyson, electrolux, hoover, kenmore, mile, oreck, panasonic, shark, etc. Any little crack or crevice is now easily cleaned 5. Eight piece kit coverts most common household vacuums into powerful mini vacuums, allowing you to clean more most hardest to reach areas 2. Quantity 7 attachment tools + 1 hose. The length of the hose provided is 910mm (35. Universal kit features 1. Maximal power eight (8) piece cleaning & detailing kit, mini / micro vacuum cleaner attachment tools. Fits uprights that have attachment hoses, most canister vacuums and all central vacuum systems 6. 75″) long.

 

Pair of ModStock Car Race Roll Around Attachments tool industrial

Pair of Mod/Stock Car Race Roll Around Attachments tool & industrial

Pair of Mod/Stock Car Race Roll Around Attachments tool & industrial - This product is made for vehicles with locking axles. . Work smarter not harder using the merrick race roll around. This product also meets the large package requirement per ups/fedex. . Fits most modified and stock race cars. The race roll around attaches to a 12″ auto dolly (auto dolly not included) and bolts directly to your modified race car or stock race car. . The estimated shipping cost will include this fee. . S. Makes moving your race care without wheels a breeze. Features and benefits. The shipping weight reflected is the dimensional weight. Attaches to 12″ auto dolly (auto dolly not included). Heavy duty steel. . A. Made in the u. Smooth red finish. 2-4 weeks to be shipped. Orders can take approx. This product meets the oversized requirement per ups/fedex. This is a special order item. . .

 

Shear Head Attachment Tools Equipment Hand Tools

Shear Head Attachment Tools Equipment Hand Tools

Shear Head Attachment Tools Equipment Hand Tools - This product also meets the large package requirement per ups/fedex. Replacement shear head attachment for 89218this product meets the oversized requirement per ups/fedex. The estimated shipping cost will include this fee. The shipping weight reflected is the dimensional weight.

 

3M DBI-SALA Fall Protection For Tools 1500014Tool Cinch Attachment For Tools Up To 35  lbs wSingle Wing To Keep Attachment Point From Traveling 10-Pack

3M DBI-SALA Fall Protection For Tools, 1500014,Tool Cinch Attachment, For Tools Up To 35 lb.s, w/Single Wing To Keep Attachment Point From Traveling, 10-Pack

3M DBI-SALA Fall Protection For Tools, 1500014,Tool Cinch Attachment, For Tools Up To 35 lb.s, w/Single Wing To Keep Attachment Point From Traveling, 10-Pack - Fall protection has been regulated for decades. 3m dbi-sala fall protection for tools model number vr-1attachmd-10pk. Drop prevention is about everybody else. Includes single nylon wing which prevents attachment point from traveling once cinched to the tool. For tools up to 35 pounds 10 pack. It is our passion to help you protect the people around you. What about the tools, dropped objects can result in huge property damages, lost tools or, worse yet, injury or death. Fall protection is about you. We know how to prevent people from falling. Fall protection for humans is vital to individual safety. Unique cinch design allows the user to quickly secure tools that are otherwise challenging to tether.

 

V Ring Attachment - Tool Cinch Dual - Medium Duty

V Ring Attachment – Tool Cinch Dual – Medium Duty

V Ring Attachment – Tool Cinch Dual – Medium Duty - Dual heavy duty nylon wings with dual triple fold catch tab (prevents attachment point from traveling once it is cinched to the tool). 3rd party tested for 35 lb tools or less. Heavy duty polyester twist multifilament bar tac stitching. Heavy duty 1 3/4″ forged v-ring powder coated. Unique cinch design allows user to simply “cinch, secure, and continue work”. Heavy duty nylon webbing.

 

Pole RATTM - Remote Attachment Tool

Pole RATTM – Remote Attachment Tool

Pole RATTM – Remote Attachment Tool - The pole rattm remote attachment tool works with vent cap systems. It/they are a must have for any duct blaster®. Start making green fastertm. This tool screws on the end of any standard painter’s pole and allows you to remotely place and remove vent caps speeding up your duct leakage testing setup.

 

Magswitch Vertical Attachment Tool Attachment

Magswitch Vertical Attachment Tool Attachment

Magswitch Vertical Attachment Tool Attachment - The vertical featherboard tool attachment is for use with the magswitch workholding system or pro table featherboard. .

 

Needle Scaler Attachment Tools Equipment Hand Tools

Needle Scaler Attachment Tools Equipment Hand Tools

Needle Scaler Attachment Tools Equipment Hand Tools - . The shipping weight reflected is the dimensional weight. This product also meets the large package requirement per ups/fedex. The estimated shipping cost will include this fee. Replacement needle scaler head attachment, for model 89275this product meets the oversized requirement per ups/fedex.

 

SOLDER ATTACHMENT Tools Equipment Hand Tools

SOLDER ATTACHMENT Tools Equipment Hand Tools

SOLDER ATTACHMENT Tools Equipment Hand Tools - . The estimated shipping cost will include this fee. This product also meets the large package requirement per ups/fedex. The shipping weight reflected is the dimensional weight. Solder attachmenut for ppmt features and benefits handles 120 w 580 btuppmt solder attachment to use solder tipstight fit on ppmt tipdesigned for ppmtthreaded receiverthis product meets the oversized requirement per ups/fedex.

 

TurboShear Heavy Duty Automotive Shears Drill Attachment Tools Equipment Hand Tools

TurboShear Heavy Duty Automotive Shears Drill Attachment Tools Equipment Hand Tools

TurboShear Heavy Duty Automotive Shears Drill Attachment Tools Equipment Hand Tools - The turboshear model tshd1a1 can follow a straight line or tight left curved or square patterns. The compact, molded clamp even fits smaller lithium-ion battery powered drills. The sleek, lightweight, aluminum cast shear head and form-fitting drill clamp ensure balanced, easy control. 53 mm) cordless or corded drill cuts straight and to the left including round and square auto body patches telescoping drill clamp wide-opening jaws also navigate thick plastic bumper profiles, rocker panels and layered metal long lasting blades also easily replaceable at job site the turboshear model tshd1 attaches to a minimum 14. The long-wearing blades are replaceable and easily installed on the job. The driveshaft of the tshd1 inserts directly into a 3/8-in (10 mm) or 1/2-in (12. 7 mm) chuck. The estimated shipping cost will include this fee. A telescoping drill clamp adjusts to fit length and width of any drill housing for one-hand operation. Lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Service life of the blades is rated at 2500-ft (762 mm) minimum in 24-ga (0. 61 mm) mild steel. Minimal force is required to move through a cut. A wide jaw opening navigates cuts in autobody panels and profiles including layered metal, rocker panels and plastic bumpers. The cam end of the driveshaft operates an upper blade to create a smooth scissors cutting action in most common sheet metals. 4 volt 3/8” (9. Heavy-duty gearing combines with high carbon steel blades to cut up to 18-ga (1. 4-volt cordless or maximum 7-amp a/c electric drill. Features and benefits use with minimum 14. This product meets the large package requirement per ups/fedex. 22 mm) automotive steel.