Top 23 Best Carbide Tipped Drills

 

Champion CT705-14X4 CARBIDE TIPPED LOCKSMITH DRILLS

Champion CT705-1/4X4 CARBIDE TIPPED LOCKSMITH DRILLS

Champion CT705-1/4X4 CARBIDE TIPPED LOCKSMITH DRILLS - . Designed for general purpose drilling, champion series 705 drills are surface treated with black oxide finish for abrasion resistance and improved coolant adherence.

 

16 PC Masonry Carbide Tipped Drill Bit Set 18 532 316 14 932 516 1132 38

16 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8

16 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8 - 2 of each of the following sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″. Drop forged steel construction.

 

14 X 4 SDS CARBIDE TIPPED DRILL BIT

1/4″ X 4″ SDS CARBIDE TIPPED DRILL BIT

1/4″ X 4″ SDS CARBIDE TIPPED DRILL BIT - These are the sds shank (also known as sds plus) rotohammer bits. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits. They are approximately a 3/8″ diameter shank.

 

Irwin 50508 Hanson 18 Glass and Tile Carbide Tipped Drill Bit by Irwin Tools

Irwin 50508 Hanson 1/8 Glass and Tile Carbide Tipped Drill Bit by Irwin Tools

Irwin 50508 Hanson 1/8 Glass and Tile Carbide Tipped Drill Bit by Irwin Tools - Irwin 50508 hanson 1/8 glass and tile carbide tipped drill bit. Recommended for use with corded high-rpm drills. Larger diameter creates flat-bottomed hole. Drill bit for use with pocket hole joinery.

 

Precision Twist L D444 Carbide-Tipped Drill 118 Deg HSS 2 1516 Flute 4 14 L

Precision Twist L D444 Carbide-Tipped Drill 118 Deg HSS 2 15/16″ Flute 4 1/4″ L

Precision Twist L D444 Carbide-Tipped Drill 118 Deg HSS 2 15/16″ Flute 4 1/4″ L - Carbide tipped drill bits can be run at speeds 2 to 2 1/2 times faster than regular high speed drill bits and create a better hole finish. Not recommended for soft steel. Bits have a high speed steel body and bright finish. Use on cast aluminum, bronze, cast and ductile irons, fiberglass, hard plastics, and other abrasive nonferrous metals. Drill shank diameter is the same as the drill bit size.

 

Power Tools Vermont American 78 x 12 Masonry Carbide Tipped Drill Bit 2608682866 Bulk

Power Tools Vermont American 7/8″ x 12″ Masonry Carbide Tipped Drill Bit 2608682866 Bulk

Power Tools Vermont American 7/8″ x 12″ Masonry Carbide Tipped Drill Bit 2608682866 Bulk - For drilling glass, ceramic and tile. Power tools vermont american 7/8″ x 12″ masonry carbide tipped drill bit 2608682866 bulk#0047/43. Unique spear point design. Tungsten carbide tipped,.

 

SDS Masonry Carbide Tipped Drill Bits 316 x 4-38 Box of 1 BC-SDS316438

SDS+ Masonry Carbide Tipped Drill Bits 3/16 x 4-3/8 (Box of 1) BC-SDS316438

SDS+ Masonry Carbide Tipped Drill Bits 3/16 x 4-3/8 (Box of 1) BC-SDS316438 - Optimized flute design to reduce stress and make the bit run cooler. Optimized brazing and hardening process for long life in reinforced concrete. 4-flute design for fast dust removal.

 

M34 Arbor WCarbide Tipped Drill

M34 Arbor W/Carbide Tipped Drill

M34 Arbor W/Carbide Tipped Drill - Repeatable results with built-in measuring scales. Accurate hinge positioning with built-in indexing tabs. Simple to use with any drill-no special tools needed. Adjustable cams ensure proper hinge offset. Reliable drilling with bit guide and stop collar.

 

Powers Fastening Innovations 00534 Hd-Straight Shank Carbide Tipped Drill 12-Inch by 24-Inch 1 Per Box

Powers Fastening Innovations 00534 Hd-Straight Shank Carbide Tipped Drill, 1/2-Inch by 24-Inch, 1 Per Box

Powers Fastening Innovations 00534 Hd-Straight Shank Carbide Tipped Drill, 1/2-Inch by 24-Inch, 1 Per Box - . Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921.

 

Irwin 50508 Hanson 18 Glass and Tile Carbide Tipped Drill Bit

Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit - Carded. For drilling glass, ceramic and tile. . Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Short Length TiN Finish Cylindrical with Flat Shank Coolant Through 140 Degree Point 38 Size 2 Cutting Length 3-1416 Overall Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 3/8″ Size, 2″ Cutting Length, 3-14/16″ Overall Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 3/8″ Size, 2″ Cutting Length, 3-14/16″ Overall Length - Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Short Length TiN Finish Whistle Notch Shank Coolant Through 140 Degree Point 12 Size

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 1/2″ Size

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 1/2″ Size - Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit.

 

Irwin 50520 Hanson 516 Glass and Tile Carbide Tipped Drill Bit

Irwin 50520 Hanson 5/16″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50520 Hanson 5/16″ Glass and Tile Carbide Tipped Drill Bit - Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. . For drilling glass, ceramic and tile. Carded.

 

12 X 18 Spline Shank Carbide Tipped Drill Bit

1/2″ X 18″ Spline Shank Carbide Tipped Drill Bit

1/2″ X 18″ Spline Shank Carbide Tipped Drill Bit - They are approximately a 3/4″ diameter shank. Spline shank carbide tipped bits made in usa very high quality finest materials available stocked in many sizes perfect for both industrial and commercial usethese are the spline shank rotohammer bits. These top quality bits are designed for long life and fast cutting through the toughest concretethere isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Jobber Length TiN Finish Whistle Notch Shank Coolant Through 140 Degree Point 20mm Size 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length - Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit.

 

Hole Saw TCT Steel Cutter Carbide Tipped Drill Bit cutting diameter20mm

Hole Saw TCT Steel Cutter Carbide Tipped Drill Bit (cutting diameter:20mm)

Hole Saw TCT Steel Cutter Carbide Tipped Drill Bit (cutting diameter:20mm) - The hole saw has a twist drill bit inside ,which is undertachable. Sharp gears and anti-cutting with lower consumption make the product a long service life. Materialcarbide. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type ma. The gears is made from yg8 tungsten carbide steel and the rigidity varies from.

 

Drill America DAM Series Carbide-Tipped Masonry Drill Bit Black Oxide Finish 14 Round Shank Spiral Flute 118 Degrees Conventional Point 14 Size 30 Length Pack of 1

Drill America DAM Series Carbide-Tipped Masonry Drill Bit, Black Oxide Finish, 1/4″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/4″ Size, 30″ Length (Pack of 1)

Drill America DAM Series Carbide-Tipped Masonry Drill Bit, Black Oxide Finish, 1/4″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/4″ Size, 30″ Length (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Designed for use in portable electric drill. Carbide-tipped tools feature cutting edges of carbide for wear resistance and a steel shank for toughness.

 

Irwin 50524 Hanson 38 Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit - Carded. For drilling glass, ceramic and tile. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.

 

2 Pack Irwin 50508 Hanson 18 Glass and Tile Carbide Tipped Drill Bit

2 Pack Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit

2 Pack Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit - Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile. Carded.

 

Powers Fastening Innovations 00512 Hd-Straight Shank Carbide Tipped Drill 14-Inch by 4-Inch 1 Per Box

Powers Fastening Innovations 00512 Hd-Straight Shank Carbide Tipped Drill, 1/4-Inch by 4-Inch, 1 Per Box

Powers Fastening Innovations 00512 Hd-Straight Shank Carbide Tipped Drill, 1/4-Inch by 4-Inch, 1 Per Box - Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. . Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921.

 

Precision Twist Q D444 Carbide-Tipped Drill 118 Deg HSS 3 716 Flute 4 34 L

Precision Twist Q D444 Carbide-Tipped Drill 118 Deg HSS 3 7/16″ Flute 4 3/4″ L

Precision Twist Q D444 Carbide-Tipped Drill 118 Deg HSS 3 7/16″ Flute 4 3/4″ L - Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats.

 

Irwin 50516 Hanson 14 Glass and Tile Carbide Tipped Drill Bit

Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit - Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile. Carded. .

 

2 Pack Irwin 50516 Hanson 14 Glass and Tile Carbide Tipped Drill Bit

2 Pack Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit

2 Pack Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit - Carded. For drilling glass, ceramic and tile. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.