Top 22 Wood Lathe Chucks for 2020

 

Hurricane Turning Tools Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Spigot Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad - These jaws are only compatible with the htc125. Normally, these are used holding small items like a box or lid. This listing is for a set of spigot jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. In compression mode, they can be used for holding small work. The outside jaws are serrated. Spigot jaws can be used in expansion mode for internal holding within a straight wall. They are very useful for holding inside a candlestick.

 

Hurricane Turning Tools Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad - Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. Serrated jaws are used for gripping end grain cylinders. This listing is for a set of serrated jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. They can be used for this but they are not as strong as dovetail jaws. .

 

Hurricane Turning Tools Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Step Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - . These jaws are used in expansion mode for internal holding within a straight wall. These jaws are only compatible with the htc100. Normally, these are used holding small items like a box or lid. This listing is for a set of step jaws with serrated grip , which are used on the hurricane htc100 4 jaw woodturning scroll chuck.

 

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck #ad

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck #ad - Pre cut with a 1″ x 8 tpi standard thread mount, and includes an adapter for 3/4″ x 16 tpi spindles. . Weighs only 1. 2 pounds. This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. The provided step jaws reverse for extra versatility when securing the work piece from the outside, or inside. The smaller diameter offers a safety feature keeping your knuckles away from the jaws when working close to the chuck. Holds a workpiece from 3/4″ to 2-1/2″ inside diameter, and a workpiece from zero to 1-1/4″ outside diameter. Uses small levers to open and tighten the three jaws.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System #ad

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System #ad - Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking #ad

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System by PSI Woodworking #ad - Also includes 8 extra long mounting screws for double jaws use (see description). Please see item description for more details. For large bowl turning (requires 16″ or larger swing lathe. Psi cmg3c mini grip 4 jaw wood lathe chuck system. Kit includes 6040 12″ cole jaws, 6039 12-15″ cole jaw adaptors, and 6030 buffer acc kit.

 

Hurricane Turning Tools Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. They can be used for this but they are not as strong as dovetail jaws. . They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. Serrated jaws are used for gripping end grain cylinders. This listing is for a set of large serrated jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System #ad

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System #ad - Includes #2 round jaws, for dowels1-1/2″ to 2-7/8″, holes 2″ to 3-1/2″. Includes #3 round jaws, external grip 3-1/16″, 4-1/2″. Includes #1 step jaws- for dowels 1/32″ to 1-1/2″, holes 11/16″to 3-1/8″. Includes four(4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1″ x 8 tpi, and has an adapter for 3/4″ x 16 tpi spindles. Includes pin jaws which hold inside holes 1″, 2-1/2″, and a screw chuck.

 

Sherline 1043 - 3-Jaw Self-centering Wood Lathe Chuck #ad

Sherline 1043 – 3-Jaw Self-centering Wood Lathe Chuck

Sherline 1043 – 3-Jaw Self-centering Wood Lathe Chuck #ad - Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. Sherline technicians custom grind each jaw to fit its own slot with as little play as possible. As chucks wear, they become looser and easier to turn. 687″ (17 mm). The hole through the chuck is. Sherline 1043, 3-jaw self-centering wood lathe chuck 3. . 1″ diameterthis chuck is identical to our p/n 1040 self-centering chuck except that it has a 1″-8 tpi thread that accommodates most wood-working lathes. If you have sent in an old chuck for jaw replacement or are replacing an old, worn chuck, you will notice that the new one is initially harder to turn than your worn one. With the jaws in the reversed position, work up to 2-1/4″ (56 mm) can be gripped. Grinding is done to within. This assure maximum accuracy. 0001″. Jaw tightness on scrolling chucks. Rotating the knurled ring closes all three jaws simultaneously to quickly grip round or hexagonal stock. Because this chuck was initially designed for machine-lathe work, its accuracy far exceeds what is necessary for general wood turning. It has a clamping range of 3/32″ (2 mm) up to 1-3/16″ (30 mm) diameter with the jaws in the normal position.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking #ad

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking #ad - Also includes 8 extra long mounting screws for double jaws use (see description). For large bowl turning (requires 16″ or larger swing lathe. Please see item description for more details. Kit includes 6040 12″ cole jaws, 6039 12-15″ cole jaw adaptors, and 6030 buffer acc kit. Psi csc2000c barracuda wood lathe chuck system.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking #ad

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking

PSI CSC2000C Barracuda Wood Lathe Chuck System by PSI Woodworking #ad - Chuck body threaded 1-1/2-inch by 8tpi, with optional adapters to 1-inch by 8tpi, 1-1/4-inch by 8tpi, m33 by 35 mm. Screw chuck insert for bowl turning. Comes with 4 sets of jaws 1 step jaws, 2 round jaws, 3 wide jaws and pin jaws. Psi csc2000c barracuda wood lathe chuck system. Long shaft chuck key, “t” handled allen wrench.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System #ad

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System #ad - Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch. Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers. Basic straight jaws for 1-inch stock, square or round.

 

Hurricane Turning Tools Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - Standard dovetail jaws are the most common jaw type used in woodturning. Measurements compression 1 3/4″, 3″ expansion 2 1/4″, 3 1/2″. This listing is for a set of standard dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. They are typically used in compression mode for holding a tenon or “foot” on the bottom of a bowl or platter. They can also be used in expansion mode for holding inside a dovetail recess. These jaws are normally included in the basic chuck kit, but you might need an extra set, or purchased a chuck as “body only” these jaws are only compatible with the htc100.

 

Hurricane Turning Tools Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad - The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. They are used in expansion mode for internal holding within a dovetail recess. You can also use them in compression mode to hold small object down to these jaws are only compatible with the htc125. This listing is for a set of extended dovetail jaws, sometimes called spindle nose jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck.

 

Hurricane Turning Tools Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Standard Dovetail Jaws for HTC125 Woodturning 4 Jaw Wood Lathe Chuck #ad - Standard dovetail jaws are the most common jaw type used in woodturning. Measurements compression 2 1/4 “, 4 1/8″ expansion 2 7/8″, 4 3/4″. They are typically used in compression mode for holding a tenon or “foot” on the bottom of a bowl or platter. They can also be used in expansion mode for holding inside a dovetail recess. This listing is for a set of standard dovetail jaws, which are used on the hurricane htc125 4 jaw woodturning scroll chuck. These jaws are normally included in the basic chuck kit, but you might need an extra set, or purchased a chuck as “body only” these jaws are only compatible with the htc125.

 

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System #ad

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System #ad - Weighs only 12 pounds with a 2-1/8-inch outside diameter. Holds workpiece from 5/8-to-2-inch inside hole diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi. Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter. Includes step jaws, round jaws, and pin jaws.

 

Hurricane Turning Tools Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Pin Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - In compression mode, they can grip a small part like a final, or pen mandrel. The straight side can be used to hold the inside of a small box body. These jaws are for small work and have several uses used in expansion mode for internal holding within a dovetail recess. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. The dovetail is set away from the flat jaw surface by about 1 inch. These jaws are only compatible with the htc100. This listing is for a set of pin jaws with dovetail , which are used on the hurricane htc100 4 jaw woodturning scroll chuck. .

 

Hurricane Turning Tools JumboCole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Jumbo/Cole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Jumbo/Cole Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - These jaws are used for gripping the top of a bowl in compression or expansion mode, allowing you to finish the bottom of the bowl. The jaw set comes with 8 buttons which can be placed in the various hole locations to accommodate a variety of bowl sizes. These jaws are only compatible with the htc100. . This listing is for a set of jumbo / cole jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. The buttons open to about 12 inches.

 

Aluminum Jumbo  Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Aluminum Jumbo / Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Aluminum Jumbo / Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - Can be used in either the headstock or tailstock. Removed easily with a knock-out bar. Will hold drill bits up to 1/2-inch in diameter. Tightens by hand without the need for a chuck key. Drill chuck mounts in the 2 mt.

 

Hurricane Turning Tools Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Extended Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - You can also use them in compression mode to hold small object down to these jaws are only compatible with the htc100. The dovetail is set away from the flat jaw surface by about 1 inch. This listing is for a set of extended dovetail jaws, sometimes called spindle nose jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe. . They are used in expansion mode for internal holding within a dovetail recess.

 

Hurricane Turning Tools Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Large Dovetail Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - These jaws are only compatible with the htc100. This listing is for a set of large dovetail jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. Don’t have an htc100 if you haven’t heard of the hurricane htc100 4″ woodturning chuck, please check it out in our ebay store. It is a super high quality chuck, without the super high price of competitive chucks. Many jaw sets are available and inserts are interchangeable for use on today’s most popular lathes. They can be used in compression mode for gripping a tenon or expansion mode for internal holding within a dovetail recess.

 

Hurricane Turning Tools Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad

Hurricane Turning Tools, Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck

Hurricane Turning Tools, Serrated Jaws for HTC100 Woodturning 4 Jaw Wood Lathe Chuck #ad - They differ from dovetail jaws in that they are not tapered and have tiny gripping “serrations”. Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or expansion mode for internal holding within a recess. Serrated jaws are used for gripping end grain cylinders. This listing is for a set of serrated jaws, which are used on the hurricane htc100 4 jaw woodturning scroll chuck. They can be used for this but they are not as strong as dovetail jaws.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.