Top 22 Best NPT Male Fittings

 

Eaton Weatherhead 9405X16X16 Carbon Steel Fitting Swivel 90 Degree Elbow 1 NPSM Female x 1 NPT Male #ad

Eaton Weatherhead 9405X16X16 Carbon Steel Fitting, Swivel, 90 Degree Elbow, 1″ NPSM Female x 1″ NPT Male

Eaton Weatherhead 9405X16X16 Carbon Steel Fitting, Swivel, 90 Degree Elbow, 1″ NPSM Female x 1″ NPT Male #ad - Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. The company, founded in 1911, is headquartered in dublin, ireland. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. Hydraulic-hose-fittingseaton manufactures electrical, hydraulic, and mechanical power equipment.

 

Eaton Weatherhead 9405X8X12 Carbon Steel Fitting Swivel 90 Degree Elbow 12 NPSM Female x 34 NPT Male #ad

Eaton Weatherhead 9405X8X12 Carbon Steel Fitting, Swivel, 90 Degree Elbow, 1/2″ NPSM Female x 3/4″ NPT Male

Eaton Weatherhead 9405X8X12 Carbon Steel Fitting, Swivel, 90 Degree Elbow, 1/2″ NPSM Female x 3/4″ NPT Male #ad - They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. The company, founded in 1911, is headquartered in dublin, ireland. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. Hydraulic-hose-fittingseaton manufactures electrical, hydraulic, and mechanical power equipment.

 

Tru-Flate 21-601 14 NPT Male Fitting x 14 ID Hose Barb Air Line Swivel Fitting #ad

Tru-Flate 21-601 1/4″ NPT Male Fitting x 1/4″ ID Hose Barb Air Line Swivel Fitting

Tru-Flate 21-601 1/4″ NPT Male Fitting x 1/4″ ID Hose Barb Air Line Swivel Fitting #ad - Handles pressures up to 150 psi. Swivel adapter for connecting a hose to a male threaded connection. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability and stainless steel for strength and resistance to scaling and corrosion. Hose barb on one end and male npt threads on the other. Barbed fitting for a tight seal on hoses and npt threads for a tighter seal than straight threads.

 

LTWFITTING Bar Production Stainless Steel 316 Barb Fitting CouplerConnector 58 Hose ID x 12 Male NPT Air Fuel Water Pack of 25 #ad

LTWFITTING Bar Production Stainless Steel 316 Barb Fitting Coupler/Connector 5/8″ Hose ID x 1/2″ Male NPT Air Fuel Water (Pack of 25)

LTWFITTING Bar Production Stainless Steel 316 Barb Fitting Coupler/Connector 5/8″ Hose ID x 1/2″ Male NPT Air Fuel Water (Pack of 25) #ad - Features, materiesstainless steel 316. About shipping great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours no matter big or small. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click “honest-f” to choose the product you want in our shop., Type male x hose barb., Net weight 43. We are international seller, each item is required to be checked by two customs. China post air mail and epacket are our main carriers,it normally takes about 1-2 weeks to deliver to us. 86g/pc. The more your purchase the best price you get., Tubing id 5/8″, thread1/2″ npt male. We will try our best to work out the issue with you. These products come from our joint factory, its annual output is about 100,000,000 pcs. If you do not receive the item during this period or have any problems, kindly contact us firstly. About us we are honest seller, any problems please contact us before leaving your feedback. Product description durable and high standard bar production class 150 stainless steel 316 barbed fitting connector. Important note pay attention to the column of size and color, you could find a variety of product types and quantities for your choice. It is one of the main copperware maker in china with a 25 years¡¯ experience in producing copperware and has already passed iso 9001 quality guarantee system attestation, to ensure the long-term and stable quality of products.

 

Dixon KHN642 King Plated Steel ShankWater Fitting for Two Clamps Hex Nipple 12 NPT Male x 34 Hose ID Barbed #ad

Dixon KHN642 King Plated Steel Shank/Water Fitting for Two Clamps, Hex Nipple, 1/2″ NPT Male x 3/4″ Hose ID Barbed

Dixon KHN642 King Plated Steel Shank/Water Fitting for Two Clamps, Hex Nipple, 1/2″ NPT Male x 3/4″ Hose ID Barbed #ad - Hex nipple for connecting a hose to a female pipe or fitting with two clamps. Barbed fitting for a tight seal on hoses and npt threads for a tighter seal than straight threads. Hose barb on one end and male npt threads on the other. Plated steel for hardness, strength, and a lower melting point than steel.

 

PVC Air Hose 38 x 25Ft - 14 NPT Male Fittings #ad

PVC Air Hose 3/8″ x 25Ft. – 1/4′” NPT Male Fittings

PVC Air Hose 3/8″ x 25Ft. – 1/4′” NPT Male Fittings #ad - 300 psi max working pressure. Designed for all-weather use. Solid brass 1/4″ npt male fittings. Tough, non-marring pvc with braided reinforcement.

 

Dixon Air King AB2 Brass Air Hose Fitting 2 Lug Universal Coupling 12 NPT Male #ad

Dixon Air King AB2 Brass Air Hose Fitting, 2 Lug Universal Coupling, 1/2″ NPT Male

Dixon Air King AB2 Brass Air Hose Fitting, 2 Lug Universal Coupling, 1/2″ NPT Male #ad - 3/8″ hex size. To eliminate the possibility of accidentally disconnecting, each air king comes with a safety clip. 2-11/16″ length. Meets pressure requirements as specified in a-a-59553 commercial item description superseding mil spec. 1/2″ size. Wwc-633d. Unexpected twisting of hose assemblies can occur during use. 13/16″ threaded part length. Rubber seal. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size. The use of a safety clip assures the users that the fittings have been properly connected. The maximum recommended working pressure for dixon air king is 150 psi at ambient temperature 70 degrees f. 2-1/2″ head size. This clip is designed to be inserted into the locking holes on the fittings. Dixon air king couplings are recommended for use on virtually any type of pneumatic equipment. 1/2″ npt male. Made of made of brass.

 

Vis Brass Pipe Fitting Close Nipple 34 NPT Male 1pcs #ad

Vis Brass Pipe Fitting, Close Nipple, 3/4″ NPT Male (1pcs)

Vis Brass Pipe Fitting, Close Nipple, 3/4″ NPT Male (1pcs) #ad - Male national pipe taper (npt) threads for connecting to female threaded pipes. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Close nipple for creating a close fit between connecting pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Tefen Nylon 66 Hose Fitting 90 Degree Elbow Adapter Gray 12 Hose ID x 12 NPT Male  Pack of 10 #ad

Tefen Nylon 66 Hose Fitting, 90 Degree Elbow Adapter, Gray, 1/2″ Hose ID x 1/2″ NPT Male (Pack of 10)

Tefen Nylon 66 Hose Fitting, 90 Degree Elbow Adapter, Gray, 1/2″ Hose ID x 1/2″ NPT Male (Pack of 10) #ad - Connects to hose on one end and a female npt threaded connection on the other. Hose is secured with a tefen snap clip (not included). Maximum operating pressure of 200 psi (14 bar) at 68 degrees f (20 degrees c) in a temperature range of -5 to +230 degrees f (-20 to +110 degrees c), subject to application. Nylon 6/6 for lightweight, strength, and resistance to corrosion from most chemicals and solvents. 90-degree elbow for connecting hose or tubes at an angle.

 

Dixon FMR500 Stainless Steel 316 Pipe and Welding Fitting Hex Nipple 12 NPT Male #ad

Dixon FMR500 Stainless Steel 316 Pipe and Welding Fitting, Hex Nipple, 1/2″ NPT Male

Dixon FMR500 Stainless Steel 316 Pipe and Welding Fitting, Hex Nipple, 1/2″ NPT Male #ad - Nipple for connecting pipe to hose. Weld end for tighter seals than straight threads. Male national pipe taper (npt) threads on one end and a smooth taper on the other end for connecting to different types of hoses or tubing. Meets astm a240 and asme sa240 standards for quality assurance. Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.

 

Dixon Valve Coupling Air King AMB1 Iron Air Hose Fitting 2 Lug Universal Coupling 14 NPT Male End #ad

Dixon Valve & Coupling Air King AMB1 Iron Air Hose Fitting, 2 Lug Universal Coupling, 1/4″ NPT Male End

Dixon Valve & Coupling Air King AMB1 Iron Air Hose Fitting, 2 Lug Universal Coupling, 1/4″ NPT Male End #ad - Wwc-633d. 2-1/2″ head size. 5/8″ threaded part length. This clip is designed to be inserted into the locking holes on the fittings. To eliminate the possibility of accidentally disconnecting, each air king comes with a safety clip. Dixon air king couplings are recommended for use on virtually any type of pneumatic equipment. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size. The use of a safety clip assures the users that the fittings have been properly connected. Rubber seal. 2-9/16″ length. 1/4″ size. Unexpected twisting of hose assemblies can occur during use. The maximum recommended working pressure for dixon air king is 150 psi at ambient temperature 70 degrees f. Meets pressure requirements as specified in a-a-59553 commercial item description superseding mil spec. 7/16″ hex size. Made of iron. 1/4″ npt male.

 

Colder PMCD1002 Acetal Tube Fitting Coupler Shutoff In-Line 18 Flow Coupler x 18 NPT Male #ad

Colder PMCD1002 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/8″ Flow Coupler x 1/8″ NPT Male

Colder PMCD1002 Acetal Tube Fitting, Coupler, Shutoff, In-Line, 1/8″ Flow Coupler x 1/8″ NPT Male #ad - 90-degree coupler for connecting two fittings at an angle. Operating temperatures range from -40 to 180 degrees f. Coupler connects to tubing on one end and an npt male connector on the other. Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 120 psi.

 

Dixon Air King AM7SWIV Iron Air Hose Fitting Universal Swivel 34 NPT Male #ad

Dixon Air King AM7SWIV Iron Air Hose Fitting, Universal Swivel, 3/4″ NPT Male

Dixon Air King AM7SWIV Iron Air Hose Fitting, Universal Swivel, 3/4″ NPT Male #ad - Meets pressure requirements as specified in a-a-59553 commercial item description superseding mil spec. Dixon air king couplings are recommended for use on virtually any type of pneumatic equipment. Made of iron. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size. 3/4″ npt male. These universal swivel fittings interchange with other air king fittings and include a heavy-duty, free-turning joint that swivels under pressure to prevent hose kinking. Rubber seal. The maximum recommended working pressure for dixon air king is 150 psi at ambient temperature 70 degrees f. Wwc-633d. For air and water service only.

 

WOJET Universal Replacement Nozzle 25 Degree Orifice 25 14 Inch NPT Male Fitting 7250PSI Spray Angle 25 Degree Surface Cleaner PA7603 #ad

WOJET Universal Replacement Nozzle, 25 Degree, Orifice 2.5, 1/4 Inch NPT Male Fitting, 7250PSI, Spray Angle 25 Degree Surface Cleaner PA7603

WOJET Universal Replacement Nozzle, 25 Degree, Orifice 2.5, 1/4 Inch NPT Male Fitting, 7250PSI, Spray Angle 25 Degree Surface Cleaner PA7603 #ad - If nozzle are blocked with sand or other debris, you can remove the nozzle, clean with needle and rinse with clean water. Made of 304 stainless steel max pressure is 7250 psi. Universal replacement screw type nozzle for water broom,surface cleaner,dust cleanerinterchangeable with wojet surface cleaner pa7603. 1/4” npt male thread fitting orifice size is 25 spray tip 25 degree. Include 6 pieces of pressure washer thread nozzles.

 

Dixon QM88 Plated Steel Dix-Lock Quick Acting Air Hose Fitting 12 Male Locking Head x 34 NPT Male #ad

Dixon QM88 Plated Steel Dix-Lock Quick Acting Air Hose Fitting, 1/2″ Male Locking Head x 3/4″ NPT Male

Dixon QM88 Plated Steel Dix-Lock Quick Acting Air Hose Fitting, 1/2″ Male Locking Head x 3/4″ NPT Male #ad - 3/4″ npt male. Dix-lock quick acting air fitting. Dix-lock is rated to 300 psi at ambient temperature (70 degree f). 1/2″ male locking coupling. Made of plated steel.

 

Spears 436-010 PVC Pipe Fitting Adapter Schedule 40 White 1 Socket x NPT Male Pack of 10 #ad

Spears 436-010 PVC Pipe Fitting, Adapter, Schedule 40, White, 1″ Socket x NPT Male (Pack of 10)

Spears 436-010 PVC Pipe Fitting, Adapter, Schedule 40, White, 1″ Socket x NPT Male (Pack of 10) #ad - Meets astm d1784 and d2466 standards for quality assurance. Pvc for chemical and corrosion resistance, strength, and light weight. Maximum operating temperature of 140 degrees f. Socket on one end and npt male threads on the other for connecting two pipes with different ends. Adapter for connecting pipes or fittings of different types.

 

Dixon DCP25S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting Plug 38 Coupling x 38 NPT Male #ad

Dixon DCP25S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, Plug, 3/8″ Coupling x 3/8″ NPT Male

Dixon DCP25S Stainless Steel 303 Air Chief Industrial Interchange Quick-Connect Hose Fitting, Plug, 3/8″ Coupling x 3/8″ NPT Male #ad - Valveless construction allows flow when disconnected. Stainless steel 303 for better machining characteristics than stainless steel 316. Interchanges with mil-c-4109f/a-a-59439 specifications for quick-disconnect couplings for hoses and portable pneumatic tools, but not water or fluids, at maximum working pressures up to 232 psi (16 bar). Air chief industrial interchange quick connect plug with a male npt threaded end. Air chief industrial interchange quick connect plug for connecting directly to a hose with a male npt end to connect with a female npt threaded connection.

 

Eaton Weatherhead 9205X16X16 Carbon Steel Fitting Swivel Adapter 1 NPSM Female x 1 NPT Male #ad

Eaton Weatherhead 9205X16X16 Carbon Steel Fitting, Swivel, Adapter, 1″ NPSM Female x 1″ NPT Male

Eaton Weatherhead 9205X16X16 Carbon Steel Fitting, Swivel, Adapter, 1″ NPSM Female x 1″ NPT Male #ad - Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Hydraulic-hose-fittingseaton manufactures electrical, hydraulic, and mechanical power equipment. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. The company, founded in 1911, is headquartered in dublin, ireland.

 

Dixon 3020RDSSAP Stainless Steel Tank Truck Fitting Thread Adapter 3 BSPP Female x 2 NPT Male #ad

Dixon 3020RDSSAP Stainless Steel Tank Truck Fitting, Thread Adapter, 3″ BSPP Female x 2″ NPT Male

Dixon 3020RDSSAP Stainless Steel Tank Truck Fitting, Thread Adapter, 3″ BSPP Female x 2″ NPT Male #ad - For tanker truck chemical and fuel transport applications. Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Female british standard pipe parallel (bspp) threads and male national pipe taper (npt) threads for connecting male pipe to female pipe. Ptfe gasket for resistance to chemicals, moisture, and high temperatures. Adapter for connecting two different types of pipes or hoses.

 

Eaton Weatherhead 602X6 Brass CA360 Inverted Flare Brass Fitting Branch Tee 14 NPT Male x 38 Tube OD #ad

Eaton Weatherhead 602X6 Brass CA360 Inverted Flare Brass Fitting, Branch Tee, 1/4″ NPT Male x 3/8″ Tube OD

Eaton Weatherhead 602X6 Brass CA360 Inverted Flare Brass Fitting, Branch Tee, 1/4″ NPT Male x 3/8″ Tube OD #ad - Adapts 1/4″ npt male fitting to 3/8″ tube od female inverted flare. Tee for connecting to a 1/4″ npt male fitting and two sections of 3/8″ od tubing. Ul listed for quality control. Compression fitting for a tight seal on rigid tubing. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Dixon Air King RAM7 Stainless Steel 316 Air Hose Fitting 2 Lug Universal Coupling 34 NPT Male #ad

Dixon Air King RAM7 Stainless Steel 316 Air Hose Fitting, 2 Lug Universal Coupling, 3/4″ NPT Male

Dixon Air King RAM7 Stainless Steel 316 Air Hose Fitting, 2 Lug Universal Coupling, 3/4″ NPT Male #ad - Dixon air king couplings are recommended for use on virtually any type of pneumatic equipment. The use of a safety clip assures the users that the fittings have been properly connected. Made of 316 stainless steel. This clip is designed to be inserted into the locking holes on the fittings. To eliminate the possibility of accidentally disconnecting, each air king comes with a safety clip. 3/8″ hex size. Rubber seal. 3/4″ size. Meets pressure requirements as specified in a-a-59553 commercial item description superseding mil spec. Unexpected twisting of hose assemblies can occur during use. The maximum recommended working pressure for dixon air king is 150 psi at ambient temperature 70 degrees f. 2-1/2″ head size. 2-13/16″ length. 3/4″ npt male. 7/8″ threaded part length. Wwc-633d. With the universal head, any fittings within that range can be connected regardless of hose shank or thread size.

 

Dixon PN4000 Carbon Steel Pipe and Welding Fitting Nipple 4 NPT Male x 4 Length #ad

Dixon PN4000 Carbon Steel Pipe and Welding Fitting, Nipple, 4″ NPT Male x 4″ Length

Dixon PN4000 Carbon Steel Pipe and Welding Fitting, Nipple, 4″ NPT Male x 4″ Length #ad - Male national pipe taper (npt) threads on one end and smooth on the other end for connecting to different types of hoses or tubing. Nipple for connecting two pipes or extending pipe length. Weld end for tighter seals than straight threads. Carbon steel for tensile strength and hardness.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.