Top 22 Best Collet Sizes

 

TTC 5C Hex Collet - Size 716 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 7/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 7/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

QA-1 Quick Change Tap AdapterCollet Size 1 Tap size 516

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 5/16″)

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 5/16″) - When paired with quick change holders, these greatly reduce change-over time. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. Equivalent to collis # 78916 us shop tools # bz00-31p command # xtc1-0312 techniks # 19/11-4079.

 

TTC 5C Hex Collet - Size 516 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 5/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 5/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

T&O ER-40 Spring Collet Chuck Holder - Taper 1 Straight Shank COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Holder – Taper: 1″ Straight Shank COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Holder – Taper: 1″ Straight Shank COLLET SIZE: ER-40 - Wide variety of holders to be used on various machine tools. Tap shank dia (inch) 0381. Tap size 3/8″. Tap shank square (inch) 0286.

 

T&O ER-16 Mini milling drilling extension set - Taper 34 Straight Shank Length  6 COLLET SIZE ER-16

T&O ER-16 Mini milling & drilling extension set – Taper: 3/4″ Straight Shank Length : 6″ COLLET SIZE: ER-16

T&O ER-16 Mini milling & drilling extension set – Taper: 3/4″ Straight Shank Length : 6″ COLLET SIZE: ER-16 - Short collet design for less overhang and prevents tool breakage. Small nose diameter for hard to reach places. Capacity 020″, 393″. Concentricity 0004″ at 2″ from collet line. Range per collet 0394″.

 

TTC 5C Hex Collet - Size 78 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 7/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 7/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

Techniks 1911-4054 12 732 ANSI Rigid Tap Collet Size 1

Techniks 19/11-4054 12 7/32″ ANSI Rigid Tap Collet Size 1

Techniks 19/11-4054 12 7/32″ ANSI Rigid Tap Collet Size 1 - For use with size 1 holders. Our part # tec-19/11-4054. For ansi tap sizes #12, 7/32″. Quick-change style. Change worn taps in seconds.

 

Warrior Free Shipping 10pcs Tig Collet 10N24 size 332 24mm50mm Copper material

Warrior Free Shipping 10pcs Tig Collet 10N24 size 3/32″ 2.4mm*50mm Copper material

Warrior Free Shipping 10pcs Tig Collet 10N24 size 3/32″ 2.4mm*50mm Copper material - Details suitable for wp-17/18/26 tig welding torch tig parts 10n24, size 3/32″ 2. 4mm 10n24. 4mm50mm material copper package including 10pcs 2.

 

T&O ER-16 Collet Chuck - Taper R8 COLLET SIZE ER-16

T&O ER-16 Collet Chuck – Taper: R8 COLLET SIZE: ER-16

T&O ER-16 Collet Chuck – Taper: R8 COLLET SIZE: ER-16 - Made of highest grade steel available. R8 shank x 1-1/2″.

 

T&O ER-40 Spring Collet Chuck Set - Taper 5 MT COLLET SIZE ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 5 MT COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Set – Taper: 5 MT COLLET SIZE: ER-40 - Tools never get stuck in holder due to “built-in self-releasing system”. Wide holding range of 0394″ on each collet. Unique 8° taper affords highest gripping power. Concentricity guaranteed to 0005″. A must when you need to hold tools accurately and rigidly.

 

TTC 5C Hex Collet - Size 12 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 1/2″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 1/2″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

Techniks 3112-4127 12 ANSI Rigid Tap Collet Size 2

Techniks 31/12-4127 1/2″ ANSI Rigid Tap Collet Size 2

Techniks 31/12-4127 1/2″ ANSI Rigid Tap Collet Size 2 - Quick-change style. Change worn taps in seconds. Our part # tec-31/12-4127. For ansi tap sizes 1/2″ & m12, m125 metric shanks. For use with size 2 holders.

 

TTC 5C Hex Collet - Size 316 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 3/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 3/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

G CAPORALI SRL 5C Square Collet - Size 38 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 3/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

G. CAPORALI SRL 5C Square Collet – Size: 3/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

Techniks 1911-4036 0-6 ANSI Rigid Tap Collet Size 1

Techniks 19/11-4036 0-6″ ANSI Rigid Tap Collet Size 1

Techniks 19/11-4036 0-6″ ANSI Rigid Tap Collet Size 1 - Quick-change style. Our part # tec-19/11-4036. For use with size 1 holders. Change worn taps in seconds. For ansi tap sizes 0-#6 & m16-m35 metric shanks.

 

TTC 5C Hex Collet - Size 38 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 3/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 3/8″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Precision ground to close tolerance. Made of highest grade steel available.

 

ETM ER-40 Spring Collet Chuck Holder - Taper 4 MT COLLET SIZE ER-40

ETM ER-40 Spring Collet Chuck Holder – Taper: 4 MT COLLET SIZE: ER-40

ETM ER-40 Spring Collet Chuck Holder – Taper: 4 MT COLLET SIZE: ER-40 - Description, etm er-40 spring collet chuck holder, taper 4 mt collet size er-40 collet size, er40 taper, 4 mt drawbar thread, 5/8-11 length from gage line to face of clamping nut, 3-3/16.

 

TTC 5C Hex Collet - Size 916 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 9/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 9/16″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.

 

5-C Expanding Collets Size 3  750 - 1437 Range 1-12 Dia  1 Lgth  750 Min Mach Dia

5-C Expanding Collets Size: 3 / .750 – 1.437″ Range (1-1/2″ Dia. / 1″ Lgth. / .750″ Min. Mach Dia.)

5-C Expanding Collets Size: 3 / .750 – 1.437″ Range (1-1/2″ Dia. / 1″ Lgth. / .750″ Min. Mach Dia.) - The most effective and accurate means of internal chucking for short runs to mass production. 750″ through 1. 0005″. Heads are machinable. Shanks are precision ground to maintain concentricity with +/-. Machinable to any configuration within their stock and minimum machinable diameters. 437″. Once seated in spindle and machined to size, these collets can hold concentricity well within. Allows “internal chucking” within the range. 0005″. Applicable on any manual or cnc lathe, milling machine or grinder with a 5c spindle.

 

T&O ER-16 Collet Chuck - Taper 12 Straight Shank Shank Length  4 COLLET SIZE ER-16

T&O ER-16 Collet Chuck – Taper: 1/2″ Straight Shank Shank Length : 4″ COLLET SIZE: ER-16

T&O ER-16 Collet Chuck – Taper: 1/2″ Straight Shank Shank Length : 4″ COLLET SIZE: ER-16 - Clamping nut diameter 7/8″. Made of highest grade steel available.

 

QA-1 Quick Change Tap AdapterCollet Size 1 Tap size 14 or 14

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 14 or 1/4″)

QA-1 Quick Change Tap Adapter/Collet Size 1 (Tap size 14 or 1/4″) - Equivalent to collis # 78915 us shop tools # bz00-025p techniks # 19/11-4063. The qa-1 is a rigid (no clutch) quick change positive drive tap adaptor that is ideal for mass production tapping applications. When paired with quick change holders, these greatly reduce change-over time.

 

TTC 5C Hex Collet - Size 14 EXTERNAL THREAD 1240 x 20 RH INTERNAL THREAD 1047 x 24 RH

TTC 5C Hex Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH

TTC 5C Hex Collet – Size: 1/4″ EXTERNAL THREAD: 1.240″ x 20 RH INTERNAL THREAD: 1.047″ x 24 RH - Made of highest grade steel available. Precision ground to close tolerance.