Top 19 Southeast Tools

 

Southeast Tool CNC Router Bit Set

Southeast Tool CNC Router Bit Set

Southeast Tool CNC Router Bit Set - Mdf door bit, bead 1-1/2″ dia. 25″l 1/2″ 2+2 compression spiral rh, 2″l 1-1/2″ v-groove, 2. Set consists of 1/4″ spiral upcut 1/4″ spiral downcut 1/2″ spiral upcut 1/2″ spiral downcut 1/2″ 2+2 compression spiral rh, 1. Mdf door bit, cove. 5″l for 3/4″ material 7/8″ dia.

 

Southeast Tool SBPT1F Carbide-Tip Brad Point Twist Bit - 1D x 4Twist x 6OAL 12 Shank w 3 Flat

Southeast Tool SBPT1F Carbide-Tip Brad Point Twist Bit – 1″D x 4″Twist x 6″OAL, 1/2″ Shank w/ 3 Flat

Southeast Tool SBPT1F Carbide-Tip Brad Point Twist Bit – 1″D x 4″Twist x 6″OAL, 1/2″ Shank w/ 3 Flat - 1″, three flats 1/2″ shank. Recommended for drive-in bolts. 5-15/16″ overall length. No 200 ct for latch bore.

 

Southeast Tool SDR305 3-Wing Bit - 58 D x 6 OAL x 12 Shank

Southeast Tool SDR305 3-Wing Bit – 5/8″ D x 6″ OAL x 1/2″ Shank

Southeast Tool SDR305 3-Wing Bit – 5/8″ D x 6″ OAL x 1/2″ Shank - Bore plastic formica and tempered masonite as well as abrasive materials and hard wood. Also excellent for lock hole boring in wood doors. Overall length, 6″ twist length, 1″. Size, 5/8″ shank, 1/2″.

 

Southeast Tool SLAT780 Carbide Tipped Latch Bore Bit - 6 OAL x 1 D x 12 Shank w Flat

Southeast Tool SLAT780 Carbide Tipped Latch Bore Bit – 6″ OAL x 1″ D x 1/2″ Shank, w/ Flat

Southeast Tool SLAT780 Carbide Tipped Latch Bore Bit – 6″ OAL x 1″ D x 1/2″ Shank, w/ Flat - This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. It makes a clearly superior tool at a greatly reduced cost. (There are other definitions but they are all pretty close to this. With flatbraze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. This makes it expensive but it is really worth it. )Carbide brazing is done with a high silver braze alloy. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. Door latch drill bits, for automated pre-hung door equipment, carbide tipped, southeast tool slat780 1 cutting diameter, 1/2 shank, 6 overall length.

 

Southeast Tool 129330 Carbide Tipped Latch Boring Bit - 78 Diameter with 1 Flat Shank 6-14 OAL

Southeast Tool 129330 Carbide Tipped Latch Boring Bit – 7/8″ Diameter with 1 Flat Shank, 6-1/4″ OAL

Southeast Tool 129330 Carbide Tipped Latch Boring Bit – 7/8″ Diameter with 1 Flat Shank, 6-1/4″ OAL - 6-1/4″ length. 7/8″ 1 flat. Carbide-tipped.

 

Southeast Tool SEHMC375 Hollow Mortising Chisel - 38D 58Shank 3-14Depth 5-12OAL

Southeast Tool SEHMC375 Hollow Mortising Chisel – 3/8″D, 5/8″Shank, 3-1/4″Depth, 5-1/2″OAL

Southeast Tool SEHMC375 Hollow Mortising Chisel – 3/8″D, 5/8″Shank, 3-1/4″Depth, 5-1/2″OAL - Size, 3/8″ shank diameter, 5/8″ shank length, 1-1/2″ mortising depth, 3-1/4″. Use with hollow chisel bits #1, 28 bit not included. 4″ blade, 5-1/2″ overall length, 1/4″ & 5/16″ sizes have reinforced blade all dimensions in inches. For making square mortises in one stroke, and rectangular mortises with each succeeding stroke.

 

Southeast Tool SBPT1T-L-18L Drill Bit - 12 Diameter x 18 Long

Southeast Tool SBPT1T-L-18L Drill Bit – 1/2″ Diameter x 18″ Long

Southeast Tool SBPT1T-L-18L Drill Bit – 1/2″ Diameter x 18″ Long - For masterline extension flush bolt drill fixture. 18″ replacement drill bit.

 

Southeast Tool 129336 Carbide Tipped Lock Boring Bit - 2-18 D w Round Shank 5-34 OAL

Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL

Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL - 5-3/4″ overall length. Carbide tipped for long life, these bits are recommended for wood doors. All bits have 1/2″ shank. Works with most pre-hung door equipment.

 

Southeast Tool SDR310 3-Wing Bit - 78 D x 6 OAL x 12 Shank

Southeast Tool SDR310 3-Wing Bit – 7/8″ D x 6″ OAL x 1/2″ Shank

Southeast Tool SDR310 3-Wing Bit – 7/8″ D x 6″ OAL x 1/2″ Shank - Size, 7/8″ shank, 1/2″. Overall length, 6″ twist length, 1″. Bore plastic formica and tempered masonite as well as abrasive materials and hard wood. Also excellent for lock hole boring in wood doors.

 

Full Bead Bit 316 Radius 1 Dia 12 Cut Length 14 Shank Southeast Tool SE3192

Full Bead Bit, 3/16 Radius, 1″ Dia, 1/2 Cut Length, 1/4 Shank, Southeast Tool SE3192

Full Bead Bit, 3/16 Radius, 1″ Dia, 1/2 Cut Length, 1/4 Shank, Southeast Tool SE3192 - ) carbide brazing is done with a high silver braze alloy. Braze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. This makes it expensive but it is really worth it. Full bead, form router bits, carbide tipped, southeast tool se3192 3/16 radius, 1 cutting diameter, 1/2 cutting length, 1/4 shank. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. (There are other definitions but they are all pretty close to this. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. It makes a clearly superior tool at a greatly reduced cost. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear.

 

Southeast Tool SLAT730 Carbide Tipped Latch Bore Bit - 6 OAL x 1516 D x 12 Shank w Flat

Southeast Tool SLAT730 Carbide Tipped Latch Bore Bit – 6″ OAL x 15/16″ D x 1/2″ Shank, w/ Flat

Southeast Tool SLAT730 Carbide Tipped Latch Bore Bit – 6″ OAL x 15/16″ D x 1/2″ Shank, w/ Flat - Norfield latch boring bits. 5/16″ 1 flat. 6-1/4″ length. Carbide-tipped.

 

Southeast Tool SLOC605 Carbide-Tipped Door Bit - 2-18 D x 12 Shank x 5-34 OAL 3 Flat on Shank

Southeast Tool SLOC605 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL, 3 Flat on Shank

Southeast Tool SLOC605 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL, 3 Flat on Shank - All bits have 1/2″ shank. 5-3/4″ overall length. Carbide tipped for long life, these bits are recommended for wood doors. Works with most pre-hung door equipment.

 

Southeast Tool SLAT740 Carbide Tipped Latch Bit - 1516D x 5-78OAL x 12 Threaded Shank

Southeast Tool SLAT740 Carbide Tipped Latch Bit – 15/16″D x 5-7/8″OAL x 1/2″ Threaded Shank

Southeast Tool SLAT740 Carbide Tipped Latch Bit – 15/16″D x 5-7/8″OAL x 1/2″ Threaded Shank - 5-7/8″ length. Carbide-tipped. 5/16″, threaded shank. Norfield latch boring bits.

 

Southeast Tool SE29007 General Purpose Drill Bits - 764D 2-58OAL 1-12Flute 1-18Shank RH

Southeast Tool SE29007 General Purpose Drill Bits – 7/64″D, 2-5/8″OAL, 1-1/2″Flute, 1-1/8″Shank, RH

Southeast Tool SE29007 General Purpose Drill Bits – 7/64″D, 2-5/8″OAL, 1-1/2″Flute, 1-1/8″Shank, RH - Overall length, 2-5/8″ twist length, 1-1/2″. High speed steel, much longer life than carbon steel 118 point. No x10 general purpose jobbers length straight shank twist drills. Diameter, 7/64″ decimal equivalent, 1094″.

 

Southeast Tool SEHMA-12-XL Arbors For Screw-On Mortise Bits - 12 D x 2-58 OAL 14-28 Thread

Southeast Tool SEHMA-1/2-XL Arbors For Screw-On Mortise Bits – 1/2″ D x 2-5/8″ OAL, 1/4-28 Thread

Southeast Tool SEHMA-1/2-XL Arbors For Screw-On Mortise Bits – 1/2″ D x 2-5/8″ OAL, 1/4-28 Thread - Thread size, 1/4-27. Arbor, 1/2″.

 

Southeast Tool SEHMA-38-XL Arbors For Screw-On Mortise Bits - 38 D x 2-58 OAL 14-28 Thread

Southeast Tool SEHMA-3/8-XL Arbors For Screw-On Mortise Bits – 3/8″ D x 2-5/8″ OAL, 1/4-28 Thread

Southeast Tool SEHMA-3/8-XL Arbors For Screw-On Mortise Bits – 3/8″ D x 2-5/8″ OAL, 1/4-28 Thread - Thread size, 1/4-28. Arbor, 3/8″.

 

Southeast Tool SLOC600 Carbide-Tipped Door Bit - 2-18 D x 12 Shank x 5-34 OAL wFlat on Shank

Southeast Tool SLOC600 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL w/Flat on Shank

Southeast Tool SLOC600 Carbide-Tipped Door Bit – 2-1/8″ D x 1/2″ Shank x 5-3/4″ OAL w/Flat on Shank - It also acts like a suspension on a car in that it cushions the hard carbide tool tip to protect it from chipping, breaking and excess wear. This makes it expensive but it is really worth it. Unlike other attachment methods, good brazing forms a mechanical and a chemical bond between the carbide and the steel so that the bond is much stronger than either the steel or the carbide. The braze alloy (silver solder, high silver solder, high temp silver solder) is about 50% silver. Brazing is the joining of two dissimilar materials through the use of a third material at temperatures above 800° f. It makes a clearly superior tool at a greatly reduced cost. ) Carbide brazing is done with a high silver braze alloy. With flat on shank braze tools ( ct carbide tipped or tct tungsten carbide tipped ) have a piece of expensive tungsten carbide brazed to a steel shaft. (There are other definitions but they are all pretty close to this. Door boring bit for automated pre-hung door equipment, carbide tipped, southeast tool sloc600 2 1/8 cutting diameter, 1/2 shank, 5 3/4 overall length. This gives you the incredible long wear of carbide (up to 100 times that of steel) and the toughness of a steel saw plate, router shaft, etc.

 

Southeast Tool SE29008 General Purpose Drill Bits - 18D 2-34OAL 1-58Flute 1-18Shank RH

Southeast Tool SE29008 General Purpose Drill Bits – 1/8″D, 2-3/4″OAL, 1-5/8″Flute, 1-1/8″Shank, RH

Southeast Tool SE29008 General Purpose Drill Bits – 1/8″D, 2-3/4″OAL, 1-5/8″Flute, 1-1/8″Shank, RH - No x10 general purpose jobbers length straight shank twist drills. High speed steel, much longer life than carbon steel 118 point. Diameter, 1/8″ diameter, 1/8″. Overall length, 2-3/4″ twist length, 1-5/8″.

 

Southeast Tool SDR410 3-Wing Bit - 2-18 D x 6 OAL x 12 Shank

Southeast Tool SDR410 3-Wing Bit – 2-1/8″ D x 6″ OAL x 1/2″ Shank

Southeast Tool SDR410 3-Wing Bit – 2-1/8″ D x 6″ OAL x 1/2″ Shank - Clamping range 398-437″. No 812-ct carbide-tipped 3-wing drill. Precision ground and hand inspected only the very best materials and grinding techniques used. The most accurate er32 collet in the industry- average 00002″ total indicated runout (tir).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.