Top 18 Michigan Drills

 

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Point 1525mm Size Pack of 1 #ad

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Point, 15.25mm Size (Pack of 1)

Michigan Drill 301 Series High-Speed Steel Jobber Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Point, 15.25mm Size (Pack of 1) #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Ground finish suitable for most materials. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Flute to oal for maximum rigidity ground to ansi specifications.

 

Michigan Drill 703C P1 Super Cobalt Steel P Type Cut-Off Blade T-Shaped 4-12 Length x 116 Width x 12 Height #ad

Michigan Drill 703C P1 Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 4-1/2″ Length x 1/16″ Width x 1/2″ Height

Michigan Drill 703C P1 Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 4-1/2″ Length x 1/16″ Width x 1/2″ Height #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Produces a chip narrower than the blade itself and is suited for cutting off, grooving and similar operations. Available in t-shaped style. The narrow design conserves material being cut and reduces the heat generated when cutting. Increased clearance angles on each side of the blade reduces friction.

 

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit 2 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1 Size Pack of 1 #ad

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1)

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1″ Size (Pack of 1) #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 1-inches size.

 

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit 2 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1316 Size Pack of 1 #ad

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 13/16″ Size (Pack of 1)

Michigan Drill 203 Series High-Speed Steel General Purpose Drill Bit, #2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 13/16″ Size (Pack of 1) #ad - Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. 13/16-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 118 degrees conventional point.

 

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit Round Shank Spiral Flute 118 Degrees Conventional Point 1-3164 Size Pack of 1 #ad

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-31/64″ Size (Pack of 1)

Michigan Drill 303 Series High-Speed Steel Reduced Shank Drill Bit, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1-31/64″ Size (Pack of 1) #ad - 1/2 inches standard shank diameter. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with 1-31/64-inches size. Round shanks allow use with a wide variety of toolholding systems.

 

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit Ground Finish 12 Round Shank Spiral Flute 118 Degrees Conventional Point 58 Size 12 Length Pack of 1 #ad

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit, Ground Finish, 1/2″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1)

Michigan Drill 212X Series High-Speed Steel Reduced Shank Drill Bit, Ground Finish, 1/2″ Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1) #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in ground finish. 1/2-inches diameter reduced shank for 1/2-inches capacity chucks. Round shanks allow use with a wide variety of toolholding systems.

 

Michigan Drill 703C P5X Super Cobalt Steel P Type Cut-Off Blade T-Shaped 6 Length x 18 Width x 78 Height #ad

Michigan Drill 703C P5X Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 6″ Length x 1/8″ Width x 7/8″ Height

Michigan Drill 703C P5X Super Cobalt Steel “P” Type Cut-Off Blade, T-Shaped, 6″ Length x 1/8″ Width x 7/8″ Height #ad - Increased clearance angles on each side of the blade reduces friction. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. The narrow design conserves material being cut and reduces the heat generated when cutting. Available in t-shaped style. Produces a chip narrower than the blade itself and is suited for cutting off, grooving and similar operations.

 

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit 3 Morse Taper Shank Spiral Flute 118 Degrees Conventional Point 1516 Size Pack of 1 #ad

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 15/16″ Size (Pack of 1)

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 15/16″ Size (Pack of 1) #ad - 118 degrees conventional point. 15/16-inches size. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters.

 

Michigan Drill BH34B Precision Hardened Steel Boring Head with Integrated Straight Shank 2-12 Diameter 5-1316 Length #ad

Michigan Drill BH34B Precision Hardened Steel Boring Head with Integrated Straight Shank, 2-1/2″ Diameter, 5-13/16″ Length

Michigan Drill BH34B Precision Hardened Steel Boring Head with Integrated Straight Shank, 2-1/2″ Diameter, 5-13/16″ Length #ad - 001 micrometer dial. Michigan drill boring head with integrated straight shank. Boring capacity up to 4-inches. Made from precision hardened steel. 3/4-inches offset travel, 3/4-inches vertical hole spacing and 2-5/8-inches shank length. Made in usa. Direct reading 0.

 

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit Black Oxide Finish 3 Morse Taper Shank Spiral Flute 118 Degrees Notched Point 1316 Size 10-34 Length Pack of 1 #ad

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 13/16″ Size, 10-3/4″ Length (Pack of 1)

Michigan Drill 299 Series High-Speed Steel Oil Hole Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, Spiral Flute, 118 Degrees Notched Point, 13/16″ Size, 10-3/4″ Length (Pack of 1) #ad - It features coolant passages throughout the length of the body. Morse taper shank allows the tool to be inserted directly into the machine’s spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.

 

Michigan Drill 700C Series Cobalt Steel Square Tool Bit Ground Finish 12 Size 8 Length #ad

Michigan Drill 700C Series Cobalt Steel Square Tool Bit, Ground Finish, 1/2″ Size, 8″ Length

Michigan Drill 700C Series Cobalt Steel Square Tool Bit, Ground Finish, 1/2″ Size, 8″ Length #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Ground finish suitable for most materials. Both ends beveled 10 degrees. Square tool bit. 8-inches length.

 

Michigan Drill 300 Series High-Speed Steel Jobber Length Drill Bit Black Oxide Finish Round Shank Spiral Flute 118 Degrees Conventional Point 3364 Size Pack of 1 #ad

Michigan Drill 300 Series High-Speed Steel Jobber Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 33/64″ Size (Pack of 1)

Michigan Drill 300 Series High-Speed Steel Jobber Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 33/64″ Size (Pack of 1) #ad - Creates a porous layer that holds cutting oil which provides abrasion resistance and improved chip flow. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit Uncoated Bright Finish Round with Square End 2 Spiral Flute 4-40 Ground Thread #ad

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit, Uncoated (Bright) Finish, Round with Square End, 2 Spiral Flute, 4-40 Ground Thread

Michigan Drill 789 Series High-Speed Steel Machine Screw Combined Tap and Drill Bit, Uncoated (Bright) Finish, Round with Square End, 2 Spiral Flute, 4-40 Ground Thread #ad - Available with 2 spiral flute. Designed to drill and tap thru holes in a single pass up to two times the tap diameter. Also can be used on multiple spindle heads with reversing mechanisms. Comes with 1-15/16-inches length. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 58 Size 12 Length Pack of 1 #ad

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1)

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 5/8″ Size, 12″ Length (Pack of 1) #ad - Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in ground finish. Long length for extra reach ideal for deep hole drilling. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 1764 Size Pack of 1 #ad

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 17/64″ Size (Pack of 1)

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 17/64″ Size (Pack of 1) #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of tool holding systems. 118 degrees conventional point. 17/64-inches size.

 

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 2164 Size Pack of 1 #ad

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 21/64″ Size (Pack of 1)

Michigan Drill 208 Series High-Speed Steel Extra Long Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 21/64″ Size (Pack of 1) #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 118 degrees conventional point. Round shanks allow use with a wide variety of tool holding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 21/64-inches size.

 

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit Ground Finish Round Shank Spiral Flute 118 Degrees Conventional Point 1116 Size 12 Length Pack of 1 #ad

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 11/16″ Size, 12″ Length (Pack of 1)

Michigan Drill 212 Series High-Speed Steel Extra-Long Length Drill Bit, Ground Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 11/16″ Size, 12″ Length (Pack of 1) #ad - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in ground finish. Long length for extra reach ideal for deep hole drilling. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point K Letter Size Pack of 6 #ad

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, K Letter Size (Pack of 6)

Michigan Drill 600 Series High-Speed Steel Screw Machine Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, K Letter Size (Pack of 6) #ad - High speed steel screw machine length drill bit are good for most general purpose applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of tool holding systems. It is often used in screw machine set-ups where spindle clearance is limited.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.