Top 18 Carbide Tipped Bandsaw Blades

 

Magnate M127875E34T3 Carbide Tipped Bandsaw Blade 127-78 Long - 34 Width 3 Tooth

Magnate M127.875E34T3 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 3/4″ Width; 3 Tooth

Magnate M127.875E34T3 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 3/4″ Width; 3 Tooth - Plastic capping protects teeth against damage in transit and handling. Triple chip geometry provides smoother surface finish. Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Wood or metal cutting 3/4″ width 3 tooth 0035″ thickness. Wood or metal cutting 1″ width 2-3 variable tooth 0035″ thickness.

 

Magnate M93E12T3 Carbide Tipped Bandsaw Blade 93 Long - 12 Width 3 Tooth 0025 Thickness

Magnate M93E12T3 Carbide Tipped Bandsaw Blade, 93″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness

Magnate M93E12T3 Carbide Tipped Bandsaw Blade, 93″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Specially formulated submicron grade of carbide and triple tooth geometry. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Designed for composite materials, rough cutting of abrasive wood and plywood. Made in the usa. Carbide-tipped blades are designed to be extremely wear resistant.

 

Magnate M103E1V2 Carbide Tipped Bandsaw Blade 103 Long - 1 Width 2-3 Variable Tooth

Magnate M103E1V2 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 2-3 Variable Tooth

Magnate M103E1V2 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 2-3 Variable Tooth - Measures 162-inches length by 1-inches width by 0042-inches thick. Wood or metal cutting 1″ width 2-3 variable tooth 0035″ thickness. Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Carbide tipped teeth increase wear resistance cutting high temperature alloys.

 

Magnate M143E1T3 Carbide Tipped Bandsaw Blade 143 Long - 1 Width 3 Tooth 0035 Thickness

Magnate M143E1T3 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness

Magnate M143E1T3 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 2, if the owner’s manual is not available, refer to previous invoices. This method will provide the most possible accurate length. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. Steel). The new high performance back steel offers excellent fatigue life. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Ebony, koa or cocabolo, abrasive non-ferrous materials.

 

Magnate M161E1V3 Carbide Tipped Bandsaw Blade 161 Long - 1 Width 3-4 Variable Tooth

Magnate M161E1V3 Carbide Tipped Bandsaw Blade, 161″ Long – 1″ Width; 3-4 Variable Tooth

Magnate M161E1V3 Carbide Tipped Bandsaw Blade, 161″ Long – 1″ Width; 3-4 Variable Tooth - Designed for composite materials, rough cutting of abrasive wood and plywood. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Made in the usa. Specially formulated submicron grade of carbide and triple tooth geometry. Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness.

 

Magnate M105E12T3 Carbide Tipped Bandsaw Blade 105 Long - 12 Width 3 Tooth 0025 Thickness

Magnate M105E12T3 Carbide Tipped Bandsaw Blade, 105″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness

Magnate M105E12T3 Carbide Tipped Bandsaw Blade, 105″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Specially formulated submicron grade of carbide and triple tooth geometry. Designed for composite materials, rough cutting of abrasive wood and plywood. Carbide-tipped blades are designed to be extremely wear resistant. Smooth finish for less secondary work exceptionally long life and fast cutting.

 

Magnate M137E1T3 Carbide Tipped Bandsaw Blade 137 Long - 1 Width 3 Tooth 0035 Thickness

Magnate M137E1T3 Carbide Tipped Bandsaw Blade, 137″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness

Magnate M137E1T3 Carbide Tipped Bandsaw Blade, 137″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - Ebony, koa or cocabolo, abrasive non-ferrous materials. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This method will provide the most possible accurate length. E. The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 5 inch, 11′ 5″ ) bandsaw blades suit the following modelsjet jwbs-18x, vbs-18mw, jwbs-18qt-3, jwbs-18qt-5, jwbs-18qt dake jh10w1, jh10w3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 137 inch ( 11 ft. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. Steel).

 

Magnate M103E1T3 Carbide Tipped Bandsaw Blade 103 Long - 1 Width 3 Tooth 0035 Thickness

Magnate M103E1T3 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness

Magnate M103E1T3 Carbide Tipped Bandsaw Blade, 103″ Long – 1″ Width; 3 Tooth; 0.035″ Thickness - Carbide tipped teeth increase wear resistance cutting high temperature alloys. Measures 162-inches length by 1-inches width by 0042-inches thick. Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Positive rake angle allows faster penetration for high production cutting.

 

Magnate M105E34T3 Carbide Tipped Bandsaw Blade 105 Long - 34 Width 3 Tooth 0035 Thickness

Magnate M105E34T3 Carbide Tipped Bandsaw Blade, 105″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness

Magnate M105E34T3 Carbide Tipped Bandsaw Blade, 105″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. Ebony, koa or cocabolo, abrasive non-ferrous materials. E. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 9 inch, 8′ 9″ ) bandsaw blades suit the following modelsjet jwbs-14dxpro general international 90-200 m1 (woodworking 93-1/2 to 106-3/8) grizzly g9743 ( 7 x 12 ), 8145z (105-1/4 to 109-1/4) dake se912 (metalcutting) most 14″ bandbaws with riser block kits installed. This method will provide the most possible accurate length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). The picture depicted represents one blade the pricing is for one blade/package. The new high performance back steel offers excellent fatigue life. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 105 inch ( 8 ft. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M143E1V2 Carbide Tipped Bandsaw Blade 143 Long - 1 Width 2-3 Variable Tooth

Magnate M143E1V2 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 2-3 Variable Tooth

Magnate M143E1V2 Carbide Tipped Bandsaw Blade, 143″ Long – 1″ Width; 2-3 Variable Tooth - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. The new high performance back steel offers excellent fatigue life. 11 inch, 11′ 11″ ) bandsaw blades suit the following modelsgrizzly g0514x, g0514x2, g0514x2b, g0514x3 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. This method will provide the most possible accurate length. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Ebony, koa or cocabolo, abrasive non-ferrous materials. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 143 inch ( 11 ft. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E.

 

Magnate M106E34T3 Carbide Tipped Bandsaw Blade 106 Long - 34 Width 3 Tooth 0035 Thickness

Magnate M106E34T3 Carbide Tipped Bandsaw Blade, 106″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness

Magnate M106E34T3 Carbide Tipped Bandsaw Blade, 106″ Long – 3/4″ Width; 3 Tooth; 0.035″ Thickness - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 106 inch ( 8 ft. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Ebony, koa or cocabolo, abrasive non-ferrous materials. The new high performance back steel offers excellent fatigue life. 2, if the owner’s manual is not available, refer to previous invoices. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. 10 inch, 8′ 10″ ) bandsaw blades suit the following modelsgrizzly go457, 8145z (105-1/4 to 109-1/4). The picture depicted represents one blade the pricing is for one blade/package. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish.

 

Magnate M140E12T3 Carbide Tipped Bandsaw Blade 140 Long - 12 Width 3 Tooth 0025 Thickness

Magnate M140E12T3 Carbide Tipped Bandsaw Blade, 140″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness

Magnate M140E12T3 Carbide Tipped Bandsaw Blade, 140″ Long – 1/2″ Width; 3 Tooth; 0.025″ Thickness - Wood or metal cutting 1/2″ width 3 tooth 0025″ thickness. Positive rake angle allows faster penetration for high production cutting. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 3/8″ width 3 tooth 0032″ thickness. Wood or metal cutting 1″ width 3 tooth 0035″ thickness.

 

Magnate M99E1V3 Carbide Tipped Bandsaw Blade 99 Long - 1 Width 3-4 Variable Tooth

Magnate M99E1V3 Carbide Tipped Bandsaw Blade, 99″ Long – 1″ Width; 3-4 Variable Tooth

Magnate M99E1V3 Carbide Tipped Bandsaw Blade, 99″ Long – 1″ Width; 3-4 Variable Tooth - 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. The picture depicted represents one blade the pricing is for one blade/package. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 99 inch ( 8 ft. Steel). E. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. 3 inch, 8′ 3″ ) bandsaw blades suit the following modelspowermatic 140, 143 artisan 14″ wellsaw 613 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. Ebony, koa or cocabolo, abrasive non-ferrous materials. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

 

Magnate M127875E1V2 Carbide Tipped Bandsaw Blade 127-78 Long - 1 Width 2-3 Variable Tooth

Magnate M127.875E1V2 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 1″ Width; 2-3 Variable Tooth

Magnate M127.875E1V2 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 1″ Width; 2-3 Variable Tooth - Wood or metal cutting 1″ width 2-3 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Plastic capping protects teeth against damage in transit and handling. Triple chip geometry provides smoother surface finish. Positive rake angle allows faster penetration for high production cutting.

 

Laguna Tools RK100-125 Resaw King Carbide Tipped Bandsaw Blade

Laguna Tools RK100-125 Resaw King Carbide Tipped Bandsaw Blade

Laguna Tools RK100-125 Resaw King Carbide Tipped Bandsaw Blade - Created by torben helshoj, an award winning woodworker, the resaw king displays his passion for the art. Woodworkers demanding the best will be impressed. Nearly a decade in the making, the resaw king has been skillfully finessed into one of the best woodworking blades in the world. Made from a c4 carbide tipped alloy, the resaw king can be resharpened 4-5 times variable tooth spacing significantly reduces vibration while producing sleek smooth cuts. The resaw king is perhaps the world’s finest resawing blade. The triple vari-tooth design minimizes vibration and lowers harmonics. This dynamic blade also cuts down wood waste due to its ultra-thin kerf and backing material, saving you money. Teeth are individually brazed and ground to perfection using diamond wheels on our custom-built shark grinder designed exclusively for this blade. The resaw king is the ideal blade for anyone cutting hardwoods or exotics, providing ultra smooth cut quality with minimal material loss. The resaw king is manufactured in germany exclusively for cet and is perfected here, in the usa, by our skilled team of professionals using our full line of cnc machines. Manufactured with c4 carbide teeth, this blade allows you to cut ultra-smooth, wafer-thin veneers with minimal waste.

 

Magnate M127875E1T3 Carbide Tipped Bandsaw Blade 127-78 Long - 1 Width 3 Tooth

Magnate M127.875E1T3 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 1″ Width; 3 Tooth

Magnate M127.875E1T3 Carbide Tipped Bandsaw Blade, 127-7/8″ Long – 1″ Width; 3 Tooth - Wood or metal cutting 1″ width 3 tooth 0035″ thickness. Triple chip geometry provides smoother surface finish. Wood or metal cutting 1″ width 3-4 variable tooth 0035″ thickness. Wood or metal cutting 1″ width 2-3 variable tooth 0035″ thickness. Plastic capping protects teeth against damage in transit and handling.

 

Magnate M1315E12T3 Carbide Tipped Bandsaw Blade 131-12 Long - 12 Width 3 Tooth

Magnate M131.5E12T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 1/2″ Width; 3 Tooth

Magnate M131.5E12T3 Carbide Tipped Bandsaw Blade, 131-1/2″ Long – 1/2″ Width; 3 Tooth - There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131-1/2 inch ( 10 ft. 2, if the owner’s manual is not available, refer to previous invoices. The new high performance back steel offers excellent fatigue life. This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following modelsgrizzly g0513 g0513x2 g0513b g0640x 17″ general international 90-320 m1 (metalcutting) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. This method will provide the most possible accurate length. E. It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The picture depicted represents one blade the pricing is for one blade/package. E. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Ebony, koa or cocabolo, abrasive non-ferrous materials. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M131E1V2 Carbide Tipped Bandsaw Blade 131 Long - 1 Width 2-3 Variable Tooth

Magnate M131E1V2 Carbide Tipped Bandsaw Blade, 131″ Long – 1″ Width; 2-3 Variable Tooth

Magnate M131E1V2 Carbide Tipped Bandsaw Blade, 131″ Long – 1″ Width; 2-3 Variable Tooth - It is also ideal for cutting alloy steels, tool steels, bearing steel, carbon steels, stainless steels and mold steels. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 131 inch ( 10 ft. The picture depicted represents one blade the pricing is for one blade/package. This method will provide the most possible accurate length. 4, upon requested, magnate makes blades of any length and types to fit your brand and model. This carbide tipped bandsaw blade is designed with precision triple chip ground teeth for smooth cuts, excellent finish. 2, if the owner’s manual is not available, refer to previous invoices. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Steel). This blade will outlasts carbon steel, m42 bi-metal blades when cutting wood, especially tropical hardwoods i. E. The new high performance back steel offers excellent fatigue life. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. 11 inch, 10′ 11″ ) bandsaw blades suit the following modelgrizzly g0664 (metalcutting). E. Ebony, koa or cocabolo, abrasive non-ferrous materials. If in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.