Top 18 Best Woodworking Vises

 

Wilton 63218 79A 10-Inch Jaw Width by 13-Inch Opening Woodworking Vise

Wilton 63218 79A 10-Inch Jaw Width by 13-Inch Opening Woodworking Vise

Wilton 63218 79A 10-Inch Jaw Width by 13-Inch Opening Woodworking Vise - Pivot jaw can be removed for wider clamping requirements rapid acting nut. Woodworking vise with a 10 by 4-inch jaw width and a 13-inch maximum opening. Front jaw that pivots 10-degree to allow for clamping irregular shaped parts. Mounting instructions are included. Weighs 36 pound.

 

Heavy Duty Quick Release Front Vise - Workshop Accessories  Woodworking Vises

Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises

Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises - Quantity 1 overall dimension 6-1/2”l x 8-1/2”w x 3-1/2”hweight 550 lbs. Designed for light-duty home and shop use. 6-1/2″ jaw width maximum opening 5”. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28. Countersunk holes in jaws for attachment of wood facings.

 

9 Woodworking Vise Clamp MAX Opening 10-14 Clamping Wood Working Device

9” Woodworking Vise Clamp MAX Opening 10-1/4” Clamping Wood Working Device

9” Woodworking Vise Clamp MAX Opening 10-1/4” Clamping Wood Working Device - Heavy duty cast iron and steel construction. Polished guide rods acme screw sliding bench dog. Woodworking vise 9″ wide jaws10-1/4″ opening. For mounting to 2-1/4″ thick workbench top. Quantity 1 weight 3425 lbs (roughly) overall dimension 9-3/4”l x 20”w x 9”h.

 

Kaufhof AVW-5383 Clamp-On Woodworking Bench Vise 9 Inch

Kaufhof AVW-5383 Clamp-On Woodworking Bench Vise 9 Inch

Kaufhof AVW-5383 Clamp-On Woodworking Bench Vise 9 Inch - . 9 inch jaw width light-duty woodworking vise, 8 inch jaw opening, 3 inch depth, high tensile iron jaws with cold rolled steel guide bars, jaws are drilled for attaching wood faces, zinc plated steel main screw & cross pin handle.

 

Jonti-Craft 2633JC Woodworking Vise by Jonti-Craft

Jonti-Craft 2633JC Woodworking Vise by Jonti-Craft

Jonti-Craft 2633JC Woodworking Vise by Jonti-Craft - Jonti-craft 2633jc woodworking vise. 6-1/2″ jaw width maximum opening 5”. Designed for light-duty home and shop use. Countersunk holes in jaws for attachment of wood facings. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28.

 

90Degree Right Angle Single-handle Aluminum Rectangular Carbide Woodworking Vise

90Degree Right Angle Single-handle Aluminum Rectangular Carbide Woodworking Vise

90Degree Right Angle Single-handle Aluminum Rectangular Carbide Woodworking Vise - Single handle, swing jaw, jaw rotation adjustable. Clever double pivot design allows clamping of equal or different sized workpieces at a right angle. Description 90degree right angle single-handle aluminum rectangular carbide woodworking vise features purpose woodworking. Right angle corner vice, cast alloy body, steel thread. With the thread wound all the way back, the maximum opening of the jaw is 70mm. Slots in base plate so you can fix the vice to a work bench or machine table. Specification material aluminum alloy die-casting plierssurface coating single handle handle jaw rotation can be adjustablespecifications maximum opening of about 70 mm, jaw width of about 900mm, jaw depth of about 35mm package includes 1 x corner tool. Useful for woodworking, engineering and welding.

 

Jonti-Craft 2633JC Woodworking Vise

Jonti-Craft 2633JC Woodworking Vise

Jonti-Craft 2633JC Woodworking Vise - Jonti-craft woodworking vise. Made in the united states. Fully assembled.

 

GHP Adjustable Woodworking Vise Clamp with 5 MAX Opening - 6-12

GHP Adjustable Woodworking Vise Clamp with 5″ MAX Opening – 6-1/2”

GHP Adjustable Woodworking Vise Clamp with 5″ MAX Opening – 6-1/2” - This vise operates smoothly with acme thread main screw and twin guide-bars of plated steel. Weight 5. Features woodworking vise 6-1/2″ jaw width maximum opening 5” designed for light-duty home and shop use countersunk holes in jaws for attachment of wood facings designed for light-duty home and shop use. The 6 1/2″ jaw width and a 5” maximum opening capacity. Orange baked enamel finish with countersunk holes in jaws for attachment of wood facings. 50 lbs overall dimension 6-1/2”l x 8-1/2”w x 3-1/2”h quantity 1.

 

Wilton 63144 78A 4 inch X 7 inch Pivot Jaw Woodworking Vise

Wilton 63144 78A 4 inch X 7 inch Pivot Jaw Woodworking Vise

Wilton 63144 78A 4 inch X 7 inch Pivot Jaw Woodworking Vise - Wilton 63144 78a 4 inch x 7 inch pivot jaw woodworking vise. Countersunk holes in jaws for attachment of wood facings. Jonti-craft 2633jc woodworking vise. Heavy duty quick release front vise, workshop accessories > woodworking vises#0031/28. 6-1/2″ jaw width maximum opening 5”.

 

TEKTON 53986 6-12-Inch Woodworking Vise

TEKTON 53986 6-1/2-Inch Woodworking Vise

TEKTON 53986 6-1/2-Inch Woodworking Vise - Chrome plated steel sliding t-bar handle and steel guide rails. Acme-threaded screw glides smoothly without binding. Jaws predrilled for custom jaw pads (not included). Cast iron construction (30,000 psi tensile strength) with powder coated finish. Mounts to face of workbench to hold woodworking and assembly projects.

 

3-Way Centering C-Clamp Woodworking Vise Welding Holder

3-Way Centering C-Clamp Woodworking Vise Welding Holder

3-Way Centering C-Clamp Woodworking Vise Welding Holder - 3 way “c” clamp for many aspects of woodworking & carpentry this is a new 3 way “c” clamp great for many aspects of woodworking and carpentry it has a 2 1/2″ (62 mm) capacity and a throat depth of 2 1/2″ (62 mm) it measures approximately 5 1/4″ x 5 3/8″ (133 x 137 mm).

 

Big Horn 19289 - 6 Inch Clamp on Woodworking Bench Vise

Big Horn 19289 – 6 Inch Clamp on Woodworking Bench Vise

Big Horn 19289 – 6 Inch Clamp on Woodworking Bench Vise - Jaw opening 8 inch, weight 13 lbs. Jaw width 9 inch, base type clamp-on (bottom table clamp mounting). Chrome plated spindles. Big horn corporation 19289. Jaw depth 3 inch.

 

Heavy Duty Quick Release Front Vise - Workshop Accessories  Woodworking Vises

Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises

Heavy Duty Quick Release Front Vise – Workshop Accessories > Woodworking Vises - Pivot jaw can be removed for wider clamping requirements. Heavy duty quick release front vise, workshop accessories > woodworking vises#0030/28. Allows clamping of irregular-shaped parts. Front jaw moves up to 9/16-inch to act as full-length dog. Has 10-inch opening and 4-by-7-inch jaw width backed by a lifetime limited manufacturer’s warranty.

 

Columbian 33176 176 6-12-Inch Jaw Width by 4-12-Inch Opening Dog-less Light-Duty Woodworking Vise

Columbian 33176 176 6-1/2-Inch Jaw Width by 4-1/2-Inch Opening Dog-less Light-Duty Woodworking Vise

Columbian 33176 176 6-1/2-Inch Jaw Width by 4-1/2-Inch Opening Dog-less Light-Duty Woodworking Vise - 6-1/2-inch jaw width. High-tensile iron jaws. 5 pounds. 4-1/2-inch maximum opening. Includes main screw and crosspin handle.

 

EnPointâ„¢ DIY Precision Drilling Holes Pin Vise Woodworking Hand Drill for Model Resin Jewelry Walnut Amber Beeswax Olive Nut Buddha Beads Ivory Nut Plastic with 10 pcs Twist Drill Bits

EnPointâ„¢ DIY Precision Drilling Holes Pin Vise Woodworking Hand Drill for Model Resin Jewelry Walnut Amber Beeswax Olive Nut Buddha Beads Ivory Nut Plastic with 10 pcs Twist Drill Bits

EnPointâ„¢ DIY Precision Drilling Holes Pin Vise Woodworking Hand Drill for Model Resin Jewelry Walnut Amber Beeswax Olive Nut Buddha Beads Ivory Nut Plastic with 10 pcs Twist Drill Bits - It’s mainly used for the materials of wood, resin, jewelry, walnut, amber, beeswax, olive nut, vajra bodhi, buddha beads, ivory nut, pvc, acrylic and plastic etc. It feels good in the hand and has a 3-jaw hardened steel keyless chuck, so you don’t have to bother with swapping out collets. Available for holding small drills, deburrers, wires, files, reamers also use it to hand drill out the extruder on the 3d printer when it was jammed package include 1 x hand drill 10pcs twist drill bits. The adjustable gripping diameter of this hand drill is 02-34mm (1/64–9/64 inches) holds very fine drills bits much more snug than the collet vises. Works great for precision drilling and tapping, electronic assembling, tool-making, hole punching, jewelry engraving, models and mininatures and hobbies.

 

Pivot Jaw Woodworking Vises - 78a 4x7 pivot jaw woodworking vise

Pivot Jaw Woodworking Vises – 78a 4×7 pivot jaw woodworking vise

Pivot Jaw Woodworking Vises – 78a 4×7 pivot jaw woodworking vise - -Wt. Generic dimensions -jaw width 7 in. 30 lb. 825-63144 features -front jaw pivots 10º to allow for clamping irregular shaped parts. -Pivot jaw can be removed for wider clamping requirements. Product type -clamps/vises. Dimensions overall product weight -33. -Front jaw moves up 9/16” to act as a full length dog. -Nut type rapid acting. 06 pounds. -Jaw height 4 in.

 

Yost 10027 7WW-RA Woodworking Vise

Yost 10027 7WW-RA Woodworking Vise

Yost 10027 7WW-RA Woodworking Vise - The maximum opening guide bar equipped with end stop prevents vise separation. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. Solid steel guide rails adjust to counteract wear. The vise has two 1/4″- diameter holes and two 3/diameter holes for included mounting hardware. The yost vises 7ww-ra 7 inch heavy-duty ductile iron woodworkers vise mounts flush workbench 2-1/4 inch thick to provide clamping action for heavy-duty and professional applications. The slightly tapered, also known as toed, jaws create a solid grip and apply pressure evenly across the top and bottom of the vise. Assembled in the usa, the ductile iron body construction provides strength for extended life. The adjustable-height steel lift dog holds a workpiece in place for sanding or scraping and is supported by pressure clamps. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn.

 

Wilton 63245 78C 7-Inch Jaw Width by 10-Inch Opening Woodworking Vise

Wilton 63245 78C 7-Inch Jaw Width by 10-Inch Opening Woodworking Vise

Wilton 63245 78C 7-Inch Jaw Width by 10-Inch Opening Woodworking Vise - Allows clamping of irregular-shaped parts. Has 10-inch opening and 4-by-7-inch jaw width backed by a lifetime limited manufacturer’s warranty. Pivot jaw can be removed for wider clamping requirements. Woodworking vise with front jaw that pivots 10-degree. Front jaw moves up to 9/16-inch to act as full-length dog.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.