Top 17 for Best Carbide Tipped Drill Bit

 

58 X 6 SDS CARBIDE TIPPED DRILL BIT

5/8″ X 6″ SDS CARBIDE TIPPED DRILL BIT

5/8″ X 6″ SDS CARBIDE TIPPED DRILL BIT - These are the sds shank (also known as sds plus) rotohammer bits. They are approximately a 3/8″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concrete there isn’t a better bit on the market than the ones we carry you will be very pleased with the productivity you get from our bits.

 

Irwin 50532 Hanson 12 Glass and Tile Carbide Tipped Drill Bit

Irwin 50532 Hanson 1/2″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50532 Hanson 1/2″ Glass and Tile Carbide Tipped Drill Bit - Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. . For drilling glass, ceramic and tile.

 

Irwin 50524 Hanson 38 Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit - Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. Carded. For drilling glass, ceramic and tile.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Short Length TiN Finish Cylindrical with Flat Shank Coolant Through 140 Degree Point 38 Size 2 Cutting Length 3-1416 Overall Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 3/8″ Size, 2″ Cutting Length, 3-14/16″ Overall Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 3/8″ Size, 2″ Cutting Length, 3-14/16″ Overall Length - Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications.

 

8 PC Masonry Carbide Tipped Drill Bit Set 18 532 316 14 932 516 1132 38

8 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8

8 PC Masonry Carbide Tipped Drill Bit Set 1/8 5/32 3/16 1/4 9/32 5/16 11/32 3/8 - For drilling brick, concrete, marble, tile, and stone drop forged steel construction sizes 1/8″, 5/32″, 3/16″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″.

 

Irwin 50508 Hanson 18 Glass and Tile Carbide Tipped Drill Bit

Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50508 Hanson 1/8″ Glass and Tile Carbide Tipped Drill Bit - Carded. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile. .

 

Irwin 50524 Hanson 38 Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50524 Hanson 3/8″ Glass and Tile Carbide Tipped Drill Bit - Carded. For drilling glass, ceramic and tile. Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Jobber Length TiN Finish Cylindrical with Flat Shank Coolant Through 140 Degree Point 20mm Size 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length - Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials.

 

SDS Masonry Carbide Tipped Drill Bits 532 x 6-58 Box of 1 BC-SDS532658

SDS+ Masonry Carbide Tipped Drill Bits 5/32 x 6-5/8 (Box of 1) BC-SDS532658

SDS+ Masonry Carbide Tipped Drill Bits 5/32 x 6-5/8 (Box of 1) BC-SDS532658 - Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes. Large flute volume for fast drilling dust transport and less clogging. Narrow flute back for reduced friction between bit and material. Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Jobber Length TiN Finish Whistle Notch Shank Coolant Through 140 Degree Point 20mm Size 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Jobber Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 20mm Size, 116mm Cutting Length - Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Jobber length drill bit has a midrange drilling depth of 5 times its diameter for general-purpose applications. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Short Length TiN Finish Whistle Notch Shank Coolant Through 140 Degree Point 12 Size

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 1/2″ Size

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Whistle Notch Shank, Coolant Through, 140 Degree Point, 1/2″ Size - Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Whistle notch shank offers the increased grip of a cylindrical shank and additional stability with the small angle of its flat. Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on steel than an uncoated drill bit.

 

Irwin 50516 Hanson 14 Glass and Tile Carbide Tipped Drill Bit by Hanson

Irwin 50516 Hanson 1/4 Glass and Tile Carbide Tipped Drill Bit by Hanson

Irwin 50516 Hanson 1/4 Glass and Tile Carbide Tipped Drill Bit by Hanson - 1/4 drill bitfor drilling glass, ceramic and tiletungsten carbide tipped,unique spear point design.

 

Sandvik Coromant Delta Carbide-Tipped Drill Bit Short Length TiN Finish Cylindrical with Flat Shank Coolant Through 140 Degree Point 285mm Size 131mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 28.5mm Size, 131mm Cutting Length

Sandvik Coromant Delta Carbide-Tipped Drill Bit, Short Length, TiN Finish, Cylindrical with Flat Shank, Coolant Through, 140 Degree Point, 28.5mm Size, 131mm Cutting Length - Coolant-through channels internally guide coolant to the drill bit tip for high feed rates and speeds and continuous clearing of chips. Short length drill bit has a drilling depth of 35 times its diameter and offers increased rigidity for heavy feed-rate applications. Brazed carbide tip and steel body provide increased strength and stability for high speeds in high feed-rate applications. Cylindrical shank with flat is made to iso 9766 specifications, promotes better grip than a standard round shank, and drills more precise holes than shanks with multiple flats. Titanium nitride (tin) coating offers increased wear resistance, extended tool life, and higher hardness on ferrous and nonmetallic materials.

 

Bellcan Bc-SDS716658 TRU-CUT MFG SDS Masonry Carbide Tipped Drill Bits 716 X 6-58 Box of 1

Bellcan Bc-SDS716658 TRU-CUT MFG SDS+ Masonry Carbide Tipped Drill Bits 7/16 X 6-5/8 (Box of 1)

Bellcan Bc-SDS716658 TRU-CUT MFG SDS+ Masonry Carbide Tipped Drill Bits 7/16 X 6-5/8 (Box of 1) - Large flute volume for fast drilling dust transport and less clogging. Quadro-x 4 cutter design provides optimal performance when drilling larger diameter holes. Tungsten carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Narrow flute back for reduced friction between bit and material.

 

Irwin 50516 Hanson 14 Glass and Tile Carbide Tipped Drill Bit

Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit

Irwin 50516 Hanson 1/4″ Glass and Tile Carbide Tipped Drill Bit - Unique spear point design, sizes range from 1/8″-1/2″, tungsten carbide tipped, cuts a perfectly round hole without chipping or breaking. For drilling glass, ceramic and tile. Carded. .

 

Bosch HC2122 34-Inch by 8-Inch SDS-Plus Shank Carbide-Tipped Masonry Drill Bit

Bosch HC2122 3/4-Inch by 8-Inch SDS-Plus Shank Carbide-Tipped Masonry Drill Bit

Bosch HC2122 3/4-Inch by 8-Inch SDS-Plus Shank Carbide-Tipped Masonry Drill Bit - Fast dust removal provided from 4-flute design. Sold individually. For use in drill requiring sds-plus shanks. 4-flute design which provides fast dust removal. •The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads. Measures 3/4-inch by 8-inches. The carbide-tipped drill bit heads are harder and tougher to extreme loads.

 

38 X 12 Spline Shank Carbide Tipped Drill Bit

3/8″ X 12″ Spline Shank Carbide Tipped Drill Bit

3/8″ X 12″ Spline Shank Carbide Tipped Drill Bit - They are approximately a 3/4″ diameter shank. These top quality bits are designed for long life and fast cutting through the toughest concrete. These are the spline shank rotohammer bits.