Top 17 Best Cutter Heads

 

CMT 69400231 45 degree Chamfer Cutter Head 5-2932-Inch Diameter 1-14-Inch Bore

CMT 694.002.31 45 degree Chamfer Cutter Head, 5-29/32-Inch Diameter, 1-1/4-Inch Bore

CMT 694.002.31 45 degree Chamfer Cutter Head, 5-29/32-Inch Diameter, 1-1/4-Inch Bore - Cuts clean, accurate bevels, chamfers and joints that are great for edge work. Rpm between 5100 and 8800. Heavy duty aircraft aluminum body, 2 solid carbide knives (25x248x2mm). Pins for the automatic positioning of the knives. Excellent results in most materials but ideal on solid wood, veneer board and laminated materials.

 

Freud DE320-T Insert Knife Door Edge Top Profile Shaper Cutter Head 1-14 Bore

Freud DE320-T Insert Knife Door Edge Top Profile Shaper Cutter Head, 1-1/4 Bore

Freud DE320-T Insert Knife Door Edge Top Profile Shaper Cutter Head, 1-1/4 Bore - Thick micrograin carbide tips. Covered by freud’s limited lifetime warranty. Kickback reducing design.

 

Steel Dragon Tools 750 12 Ton Hydraulic Wire Cable Cutter Head for Aluminum and Copper up to 2 50mm fits GREENLEE 767

Steel Dragon Tools 750 12 Ton Hydraulic Wire Cable Cutter Head for Aluminum and Copper up to 2″ 50mm fits GREENLEE 767

Steel Dragon Tools 750 12 Ton Hydraulic Wire Cable Cutter Head for Aluminum and Copper up to 2″ 50mm fits GREENLEE 767 - 64 ton (116 kn)jaw opening 2. 38″ (340mm)net weight 13. 2kg)3/8″ female npt screw type hydraulic couplergreenlee® 755, 7475h, 975, 960saps, 980 w/ greenlee® 11289 hydraulic hose (3/8″ hose with 3/8″ male coupler on both ends)greenlee® 767, 1725 w/ greenlee® 38316 hydraulic hose (1/4″ hose with 1/4″ male coupler on both ends and a 3/8″mx1/4″f adapter)heavy duty steel carrying casedoes not cut steeloil capacity 1. 75 inches for armoured copper or aluminum cable. 5″cutting range telecom cable 2″ (50mm) maxcutting range armoured cu/alu cable 1. The remote head will work with any hydraulic hand pump or electric hydraulic pump with a 3/8 npt screw type fitting. 75″ (45mm) max (copper or aluminum)cutting range 2000mcm, 1000mm²overall length 13. Split head provides mobility ease and strength while making it easy to cut long lengthscutting force 11. The max cutting range is 2 inches for telecom cable and 1. The split head makes getting into those hard to reach areas effortless. Steel dragon tools® 750 12 ton hydraulic wire cable cutter head for aluminum and copper up to 2″ 50mm fits greenlee® 767the sdt 750 remote hydraulic cable cutter head has a 11 ton cutting force that makes cutting any copper or aluminum cable easy and efficient. 6 lbs (6. 52oz (45ml), replace with any premium hydraulic oil (sae grade 15 , iso viscosity grade 46)extra seal kit1 year warranty against manufacturer defect (replaceable blades are a wear item).

 

Woodstock D1701 3-Inch Moulding Head System Cutter head with 1-Inch Bore

Woodstock D1701 3-Inch Moulding Head System Cutter head with 1-Inch Bore

Woodstock D1701 3-Inch Moulding Head System Cutter head with 1-Inch Bore - 3-inch long. 3-inch diameter. Accepts 2 inch and 3 inch knives.

 

YUFU-TOOL Wood Working Reversible Replacement Index-able Carbide Insertsknives 15X15X25mm Pack of 1 Designed for SpiralHelical Planer Cutter Head Standard Inserts cutter cutting tools

YUFU-TOOL Wood Working Reversible Replacement Index-able Carbide Inserts/knives (15X15X2.5mm) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, Standard Inserts cutter cutting tools

YUFU-TOOL Wood Working Reversible Replacement Index-able Carbide Inserts/knives (15X15X2.5mm) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, Standard Inserts cutter cutting tools - Made of solid tungsten carbide, providing you a better experience and durable use. Holds a cutting edge up to 20 times longer than hss. Designed for numerous spiral/helical planer cutter head system. Four usable sides(15mmx15mm), and all are of the same sharpness. Easy to replace your jointers and planers, excellent accessory for wood turning work.

 

Hydraulic Rebar Cutter Head 78 16 Ton G-22F

Hydraulic Rebar Cutter Head (7/8″, 16 Ton) G-22F

Hydraulic Rebar Cutter Head (7/8″, 16 Ton) G-22F - Fitted with hh-2 female coupler (it can be customized with other types of coupler). Max pressure= 16tons. Working hydraulic pressure 10000 psi. Max rebar diameter=7/8″.

 

RIKON Power Tools 25-131H 13 Portable Planer with Helical Cutter head

RIKON Power Tools 25-131H 13″ Portable Planer with Helical Cutter head

RIKON Power Tools 25-131H 13″ Portable Planer with Helical Cutter head - 13″ benchtop planer #25-131h is a traditional style, portable planer with a 6-row, helical style cutter head with 26 hss insert cutters, driven by a powerful 15 amp motor. Planer has a fold-down top handle for setting table heights, front depth gauge, smaller extension tables and top bars for lumber returns and carrying. This means you will still get great cutting action and smooth results.

 

Grizzly H7654 Indexable Spiral Cutter Head 8-Inch

Grizzly H7654 Indexable Spiral Cutter Head, 8-Inch

Grizzly H7654 Indexable Spiral Cutter Head, 8-Inch - The 6-inch and 8-inch jointer cutter heads include cast iron pulleys bearing blocks and mounting studs. These cutter heads replace the standard straight-knife cutter heads on our grizzly jointers and planers. These grizzly cutter heads leave an incredible finish and are comparable to the byrd cutter heads in quality of cut as well as the quality of the cutter head itself. The inserts are imported from germany. • 8-inch cutter head with 40 inserts. All cutter heads include 5 extra inserts t-handle wrench torn bits and spare insert screws. Each cutter head has four spirals with indexable four-sided carbide inserts that can be rotated four times for a new factory-sharp edge.

 

YUFU-TOOL Wood Working Reversible Index-able Square Carbide Inserts15mm length X15mm width X25mm thickness Pack of 1 Designed for SpiralHelical Planer Cutter Head DIY wood turning lathe tool

YUFU-TOOL Wood Working Reversible Index-able Square Carbide Inserts(15mm length X15mm width X2.5mm thickness) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, DIY wood turning lathe tool

YUFU-TOOL Wood Working Reversible Index-able Square Carbide Inserts(15mm length X15mm width X2.5mm thickness) ,Pack of 1, Designed for Spiral/Helical Planer Cutter Head, DIY wood turning lathe tool - Made of solid tungsten carbide, providing you a better experience and durable use. Four usable sides(15mmx15mm), and all are of the same sharpness. Easy to replace your jointers and planers, excellent accessory for wood turning work. Holds a cutting edge up to 20 times longer than hss. Designed for numerous spiral/helical planer cutter head system, diy wood turning lathe tools.

 

Ridgid 26212 764 Pipe Cutter Head

Ridgid 26212 764 Pipe Cutter Head

Ridgid 26212 764 Pipe Cutter Head - This item is used for handtools & tool organizers ,pliers & cutters. 1/4-inch to 4-inches capacity. Accessory for the 1224 threading machine. 26212 cutter, 764 1/4-4 pipe. Wheel type cutter. This product manufacture by united states. Accessory.

 

Uxcell Replacement Carbide Wheel U Type Glass Cutter Head Blade Black

Uxcell Replacement Carbide Wheel U Type Glass Cutter Head Blade, Black

Uxcell Replacement Carbide Wheel U Type Glass Cutter Head Blade, Black - Wheel size 4 x 1mm/016” x 004”(dt). Total size 19 x 8 x 5mm/07” x 03” x 02”(lwh). U open width 4mm/016” color black. Net weight 5g package content 1 x u type cutter head. Product name u type cutter head material metal.

 

SEPTLS114HC2287 - Bosch power tools Wild-Bore Carbide Tipped SDS Shank Multi-Cutter Head Drill Bits - HC2287

SEPTLS114HC2287 – Bosch power tools Wild-Bore Carbide Tipped SDS Shank Multi-Cutter Head Drill Bits – HC2287

SEPTLS114HC2287 – Bosch power tools Wild-Bore Carbide Tipped SDS Shank Multi-Cutter Head Drill Bits – HC2287 - Spiral angle, 0° straight. Shank type, cylinder+sds-plus. Cutting edge material, carbide. Cutting diam, 1 1/8 in. Measuring system, inch.

 

RIDGID 46683 K-1 Combination Auger with C-Style Cutter Head Telescoping Drain Auger to Remove Drain Clogs in Sinks and Urinals

RIDGID 46683 K-1 Combination Auger with C-Style Cutter Head, Telescoping Drain Auger to Remove Drain Clogs in Sinks and Urinals

RIDGID 46683 K-1 Combination Auger with C-Style Cutter Head, Telescoping Drain Auger to Remove Drain Clogs in Sinks and Urinals - Dual power operation provides additional power necessary for removing tough obstructions. “C” cutter head breaks up hard blockages. Telescoping design provides additional cable length to remove obstructions further down the line. Left hand wound cable strengthens cable and prevents kinking.

 

Router Bits Rosette Cutter Head for Drill Press Lathe Door Corner Casing Router Bit Knives

Router Bits Rosette Cutter Head for Drill Press & Lathe Door Corner Casing Router Bit Knives

Router Bits Rosette Cutter Head for Drill Press & Lathe Door Corner Casing Router Bit Knives - This product manufacture by united states. Used to clean sides of pipe after smaller augers have passed through. 98040 cutter, t50-2 4 shark tooth. This item is used for hand tools & tool organizers ,pliers & cutters. Router bits rosette cutter head for drill press & lathe door corner casing router bit knives #0044/1. Fits ridgid sectional cable c-12 and c-15. Drain cleaning auger. Easy snap-on attachment to cables.

 

Klein Tools 63081 Replacement Cable Cutter Head

Klein Tools 63081 Replacement Cable Cutter Head

Klein Tools 63081 Replacement Cable Cutter Head - Beveled tips assure positive mating, and hinge on a rugged bolt with a pin-set nut to maintain proper blade tension. Replacement cable cutter head for klein 63041 25-inch standard cable cutters. Jaws are forged tool steel with black-oxide finish for long life. Hook-jaw blades grab and hold cable while shear-cutting action makes clean cuts. Heavy-duty pins in head serve as blade-stops.

 

Shop Fox W1741SW 8 Jointer with Spiral Cutter Head and Adjustable Beds

Shop Fox W1741SW 8″ Jointer with Spiral Cutter Head and Adjustable Beds

Shop Fox W1741SW 8″ Jointer with Spiral Cutter Head and Adjustable Beds - We started with a 3 hp motor and a spiral cutter head and added a precision parallelogram table adjustment mechanism, extra long infeed table, large cast iron center mounted fence, pedestal mounted switch and a built-in locking mobile base. Check out the other features and you’ll agree. If you set out to design a full featured 8″ jointer, you couldn’t do any better than this.

 

CMT 69410031 Rabbeting Cutter Head 4-Inch Diameter 1-14-Inch Bore

CMT 694.100.31 Rabbeting Cutter Head, 4-Inch Diameter, 1-1/4-Inch Bore

CMT 694.100.31 Rabbeting Cutter Head, 4-Inch Diameter, 1-1/4-Inch Bore - Use with spindle moulder machines, double-end tenorers, edging machines. Ideal for coated and uncoated man made boards, plastic material and hard/softwood. Rpm between 7500 and 12500. Heavy duty aircraft aluminum body, 2 carbide knives (50x12x15mm), 4 scoring knives (14x14x2mm). Manual feed, pins for the automatic positioning of the knives.