Top 17 Best 10 32 Threads in 2020

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 58 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 5/8″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 5/8″ Length, Fully Threaded, Import (Pack of 100) - Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening. Slotted drive has a linear slot for use with a flat-blade driver. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration.

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Slotted Drive Type F 10-32 Thread Size 38 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Slotted Drive, Type F, #10-32 Thread Size, 3/8″ Length (Pack of 100) - Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance.

 

Fully Threaded Rod Titanium 10-32 Threads 24 Overall Length

Fully Threaded Rod, Titanium, #10-32 Threads, 24″ Overall Length

Fully Threaded Rod, Titanium, #10-32 Threads, 24″ Overall Length - Titanium is suitable for applications that require a combination of high strength to weight ratio and corrosion resistance. Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads. Threaded rods and studs allow for fast assembly and disassembly. Studs are generally shorter in length than threaded rods. Similar to a bolt, but does not have a head.

 

ASME B1863 Plain Brass Machine Screw Hex Nut 10-32 Thread Size 18 Width Across Flats 38 Thick Pack of 100

ASME B18.6.3 Plain Brass Machine Screw Hex Nut, #10-32 Thread Size, 1/8″ Width Across Flats, 3/8″ Thick (Pack of 100)

ASME B18.6.3 Plain Brass Machine Screw Hex Nut, #10-32 Thread Size, 1/8″ Width Across Flats, 3/8″ Thick (Pack of 100) - Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads. Drive system is a hexagon-shaped head. Brass is suitable where corrosion resistance is a primary consideration. Ensure a lasting hold for any project. Hex nuts are appropriate for use in low-strength assemblies.

 

Steel Thread Rolling Screw for Metal Zinc Plated Serrated Hex Washer Head 10-32 Thread Size 1-12 Length Pack of 50

Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Thread Rolling Screw for Metal, Zinc Plated, Serrated Hex Washer Head, #10-32 Thread Size, 1-1/2″ Length (Pack of 50) - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Thread rolling screw recommended for use in metal.

 

Small Parts 370811HM303 18-8 Stainless Steel Male-Female Threaded Hex Standoff 38 Hex Size 12 Length 10-32 Thread Size Pack of 5

Small Parts 370811HM303 18-8 Stainless Steel Male-Female Threaded Hex Standoff, 3/8″ Hex Size, 1/2″ Length, 10-32 Thread Size (Pack of 5)

Small Parts 370811HM303 18-8 Stainless Steel Male-Female Threaded Hex Standoff, 3/8″ Hex Size, 1/2″ Length, 10-32 Thread Size (Pack of 5) - 10-32×1/2 #3/8 hex m-f standoff stainless steel. This product is manufactured in china. This product is manufactured by small parts.

 

Black Powder-Coated Steel Acorn Nut USA Made 10-32 Thread Size 38 Width Across Flats 1332 Height 316 Minimum Thread Depth Pack of 10

Black Powder-Coated Steel Acorn Nut, USA Made, 10-32 Thread Size, 3/8″ Width Across Flats, 13/32″ Height, 3/16″ Minimum Thread Depth (Pack of 10)

Black Powder-Coated Steel Acorn Nut, USA Made, 10-32 Thread Size, 3/8″ Width Across Flats, 13/32″ Height, 3/16″ Minimum Thread Depth (Pack of 10) - The acorn nut, also called a cap nut, has a domed top that covers exposed threads on rods, studs, and bolts. Several different nut styles fit a variety of application and installation requirements. The black powder coating offers durability. Nut styles such as locknuts and self-locking hex nuts have a locking mechanism that makes them suitable for applications with a high amount of vibration. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Steel is often used in applications where strength is the primary consideration. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. The steel acorn nut has a black powder-coated finish.

 

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap TiN Coated Round Shank with Square End Bottoming Chamfer 10-32 Thread Size H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance

YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance - Round shanks allow use with a wide variety of toolholding systems. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 05-inches thread length.

 

Steel Rivet-NUT Plain Finish 10-32 Thread Size X 010-080 Grip Range Pack of 50

Steel Rivet-NUT Plain Finish, 10-32 Thread Size X .010-.080 Grip Range (Pack of 50)

Steel Rivet-NUT Plain Finish, 10-32 Thread Size X .010-.080 Grip Range (Pack of 50) - 10-32 thread size. Blind, install from one side. Adds threads to thin sheets. Easy installation with manual or power tools. Thick wall design for maximum strength.

 

Steel Pan Head Machine Screw Zinc Plated Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 4-12 Length Fully Threaded Imported Pack of 10

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 4-1/2″ Length, Fully Threaded, Imported (Pack of 10)

Steel Pan Head Machine Screw, Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 4-1/2″ Length, Fully Threaded, Imported (Pack of 10) - Fillister head has a slightly rounded top and tall cylindrical sides, enabling a deep drive slot for high driving force. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals, is nonconductive, and is a strong yet lightweight plastic. Meets astm d4066 and d6779 specifications. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Steel Thread Cutting Screw Black Zinc Plated Pan Head Phillips Drive Type 23 10-32 Thread Size 12 Length Pack of 50

Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #10-32 Thread Size, 1/2″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Zinc Plated, Pan Head, Phillips Drive, Type 23, #10-32 Thread Size, 1/2″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Zinc plating resists corrosion and has a black reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

Stainless Steel Set Screw Plain Finish Hex Socket Drive Meets MIL-SPEC 12 Length 10-32 Threads

Stainless Steel Set Screw, Plain Finish, Hex Socket Drive, Meets MIL-SPEC, 1/2″ Length, #10-32 Threads

Stainless Steel Set Screw, Plain Finish, Hex Socket Drive, Meets MIL-SPEC, 1/2″ Length, #10-32 Threads - Set screws keep parts from turning relative to a shaft. Stainless steel is suitable where formability and cost are important considerations. Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads. Do not have an external head. Drive system is a hexagon-shaped hole.

 

Brass Machine Screw Plain Finish Round Head Slotted Drive 38 Length 10-32 Threads Pack of 100

Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 3/8″ Length, #10-32 Threads (Pack of 100)

Brass Machine Screw, Plain Finish, Round Head, Slotted Drive, 3/8″ Length, #10-32 Threads (Pack of 100) - The material is nonmagnetic. Brass provides corrosion resistance and offers thermal and electrical conductivity. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes. The round head has a domed shape. The brass machine screw has a plain finish and a round head with a slotted drive. Machine screws are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. The slotted drive has a linear slot for use with a flat-blade driver.

 

10-32 Flat Head Machine Screws Full Thread Phillips Drive Stainless Steel 18-8 Machine Thread Box of 100 100 10-32 x 34

#10-32 Flat Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Machine Thread (Box of 100) (100, 10-32 x 3/4″)

#10-32 Flat Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Machine Thread (Box of 100) (100, 10-32 x 3/4″) - Fully threaded shanks. Great for when there is minimal clearance. Length of the screw is measured under the head (part of screw that penetrates fastened material). Flat head machine screws have a flat head.

 

Steel Thread Cutting Screw Zinc Plated Finish Serrated Hex Washer Head Type F 10-32 Thread Size 12 Length Pack of 100

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 100)

Steel Thread Cutting Screw, Zinc Plated Finish, Serrated Hex Washer Head, Type F, #10-32 Thread Size, 1/2″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening and has six flat sides that a wrench can grip to turn from the side. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Pan Head Machine Screw Black Zinc Plated Meets ASME B1863 2 Phillips Drive 10-32 Thread Size 12 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Zinc Plated, Meets ASME B18.6.3, #2 Phillips Drive, #10-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

Super-Corrosion-Resistant 316 Stainless Steel Threaded Rod 10-32 Thread Size 2 Feet Long

Super-Corrosion-Resistant 316 Stainless Steel Threaded Rod, 10-32 Thread Size, 2 Feet Long

Super-Corrosion-Resistant 316 Stainless Steel Threaded Rod, 10-32 Thread Size, 2 Feet Long - More corrosion resistant than 18-8 and 410 stainless steel threaded rods, these 316 stainless steel rods have excellent resistance to chemicals and salt water and may be mildly magnetic.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.