Top 16 Southeast Tools for 2020

 

Southeast Tool SE2964 Carbide Tipped SS Backsplash Cove 38 Rx1-18Cutting DiametermX12 Cutting LengththX12Sh

Southeast Tool SE2964 Carbide Tipped SS Backsplash Cove 3/8″ Rx1-1/8″Cutting Diameterm.X1/2″ Cutting Lengthth,X1/2″Sh

Southeast Tool SE2964 Carbide Tipped SS Backsplash Cove 3/8″ Rx1-1/8″Cutting Diameterm.X1/2″ Cutting Lengthth,X1/2″Sh - Carbide tipped drill bits large diameter be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled. Carbide-tipped bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling.

 

Southeast Tool SE1572 Point Cutting Roundover 14 Shank 14 Radius 12 Cutting Diameter 12 Cutting Length 2 Length Carbide-Tipped

Southeast Tool SE1572 Point Cutting Roundover, 1/4″ Shank, 1/4″ Radius, 1/2″ Cutting Diameter, 1/2″ Cutting Length, 2″ Length, Carbide-Tipped

Southeast Tool SE1572 Point Cutting Roundover, 1/4″ Shank, 1/4″ Radius, 1/2″ Cutting Diameter, 1/2″ Cutting Length, 2″ Length, Carbide-Tipped - Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide-tipped bits. Masonry drill bit. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.

 

Southeast Tool STBNU125-1 Tapered Ball Nose-Upcut 3 Flute 18 Cutting Diameter x 1 12 Cutting Length x 14 Shank 3 Length Solid Carbide

Southeast Tool STBNU125-1 Tapered Ball Nose-Upcut, 3 Flute, 1/8″ Cutting Diameter x 1 1/2″ Cutting Length x 1/4″ Shank, 3″ Length, Solid Carbide

Southeast Tool STBNU125-1 Tapered Ball Nose-Upcut, 3 Flute, 1/8″ Cutting Diameter x 1 1/2″ Cutting Length x 1/4″ Shank, 3″ Length, Solid Carbide - Solid carbide cutting tools, such as drills and end mills, are thermally stable and offer high resistance to abrasive wear. Carbide is brittle, however, and rough handling, misuse, or misalignment can lead to broken tools and/or poor tool life. Solid carbide bits.

 

Southeast Tool SLD410 Spiral-Down-Left-Handed Drill Bit 316 Cutting Diameter x 34 Cutting Length x 14 Shank x 2 Length Solid Carbide

Southeast Tool SLD410 Spiral-Down-Left-Handed Drill Bit, 3/16″ Cutting Diameter x 3/4″ Cutting Length x 1/4″ Shank x 2″ Length, Solid Carbide

Southeast Tool SLD410 Spiral-Down-Left-Handed Drill Bit, 3/16″ Cutting Diameter x 3/4″ Cutting Length x 1/4″ Shank x 2″ Length, Solid Carbide - Solid carbide bits. Carbide is brittle, however, and rough handling, misuse, or misalignment can lead to broken tools and/or poor tool life. Solid carbide cutting tools, such as drills and end mills, are thermally stable and offer high resistance to abrasive wear.

 

Southeast Tool SE6045 Carbide Tipped Window Sill Bit X 732 Radius X 1 14 Cutting Diameter

Southeast Tool SE6045 Carbide Tipped Window Sill Bit X 7/32 Radius X 1 1/4″ Cutting Diameter.

Southeast Tool SE6045 Carbide Tipped Window Sill Bit X 7/32 Radius X 1 1/4″ Cutting Diameter. - Carbide-tipped bits. Masonry drill bit. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits large diameter be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.

 

Southeast Tool SE04588-R Collet Key for ER32 Slot Collet for Torque Wrench

Southeast Tool SE04588-R Collet Key for ER32 Slot Collet. for Torque Wrench

Southeast Tool SE04588-R Collet Key for ER32 Slot Collet. for Torque Wrench - Collet keys are used with the torque wrench. Southeast tool was started in 1998 in the basement of chuck hicks’ home as a response to what appeared to be a serious gap in the tooling industry.

 

Southeast Tool 129336 Carbide Tipped Lock Boring Bit - 2-18 D w Round Shank 5-34 OAL

Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL

Southeast Tool 129336 Carbide Tipped Lock Boring Bit – 2-1/8″ D w/ Round Shank, 5-3/4″ OAL - All bits have 1/2″ shank. Carbide tipped for long life, these bits are recommended for wood doors. 5-3/4″ overall length. Works with most pre-hung door equipment.

 

Southeast Tool SE2404 Flush Trim Bits 2 Flute 14 Shank 12 Cutting Diameter 1-12 Cutting Length 3-14 Length Carbide-Tipped

Southeast Tool SE2404 Flush Trim Bits (2 Flute), 1/4″ Shank, 1/2″ Cutting Diameter, 1-1/2″ Cutting Length, 3-1/4″ Length, Carbide-Tipped

Southeast Tool SE2404 Flush Trim Bits (2 Flute), 1/4″ Shank, 1/2″ Cutting Diameter, 1-1/2″ Cutting Length, 3-1/4″ Length, Carbide-Tipped - Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Masonry drill bit. Carbide-tipped bits. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.

 

Southeast Tool SRU120 Drill Bits 14 Cutting Diameter x 1 Cutting Length x 14 Shank x Micro-Grain Upcut Spiral 2 Length Solid Carbide

Southeast Tool SRU120 Drill Bits, 1/4″ Cutting Diameter x 1″ Cutting Length x 1/4″ Shank x Micro-Grain Upcut Spiral, 2″ Length, Solid Carbide

Southeast Tool SRU120 Drill Bits, 1/4″ Cutting Diameter x 1″ Cutting Length x 1/4″ Shank x Micro-Grain Upcut Spiral, 2″ Length, Solid Carbide - Carbide is brittle, however, and rough handling, misuse, or misalignment can lead to broken tools and/or poor tool life. Solid carbide bits. Solid carbide cutting tools, such as drills and end mills, are thermally stable and offer high resistance to abrasive wear.

 

Southeast Tool SESD-C001-TWA Collet Key for Torque Wrench Adapter Fits SD-C001

Southeast Tool SESD-C001-TWA Collet Key for Torque Wrench Adapter, Fits SD-C001

Southeast Tool SESD-C001-TWA Collet Key for Torque Wrench Adapter, Fits SD-C001 - Southeast tool was started in 1998 in the basement of chuck hicks’ home as a response to what appeared to be a serious gap in the tooling industry. Collet keys are used with the torque wrench.

 

Southeast Tool SE6390 Steel Router Collets 18 ID 12 OD 1-14 Long

Southeast Tool SE6390 Steel Router Collets, 1/8″ ID, 1/2″ OD, 1-1/4″ Long

Southeast Tool SE6390 Steel Router Collets, 1/8″ ID, 1/2″ OD, 1-1/4″ Long - Masonry drill bit. Carbide-tipped bits. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits large diameter be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled.

 

Southeast Tool SBPT1T-L-48L Brad Point Drill Bit w 18 Auger Bit - 12 D x 48 L

Southeast Tool SBPT1T-L-48L Brad Point Drill Bit w/ 18″ Auger Bit – 1/2″ D x 48″ L

Southeast Tool SBPT1T-L-48L Brad Point Drill Bit w/ 18″ Auger Bit – 1/2″ D x 48″ L - This extra-long drill bit can be used for door preparations where an extended length is required. Mounts in a 1/2″ drill motor. 48″ brad point drill. Cutting length 6″.

 

Southeast Tool SE131250-516 Mortise Bit 516-24 Thread x 1 14 Cutting Diameter x 58 Cutting Length x 58 Length Carbide-Tipped

Southeast Tool SE131250-516 Mortise Bit, 5/16-24 Thread x 1 1/4″ Cutting Diameter x 5/8″ Cutting Length x 5/8″ Length, Carbide-Tipped

Southeast Tool SE131250-516 Mortise Bit, 5/16-24 Thread x 1 1/4″ Cutting Diameter x 5/8″ Cutting Length x 5/8″ Length, Carbide-Tipped - Masonry drill bit. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled. Carbide-tipped bits. Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling.

 

Southeast Tool SE2298 Edge BevelLaminate 14 Shank 7 Degree 38 Cutting Length 38 Cutting Height Carbide-Tipped

Southeast Tool SE2298 Edge Bevel/Laminate, 1/4″ Shank, 7 Degree, 3/8″ Cutting Length, 3/8″ Cutting Height, Carbide-Tipped

Southeast Tool SE2298 Edge Bevel/Laminate, 1/4″ Shank, 7 Degree, 3/8″ Cutting Length, 3/8″ Cutting Height, Carbide-Tipped - Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide-tipped bits. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled. Masonry drill bit.

 

Southeast Tool SE280024 Diamond-Tipped Router Bit 11 34 Diameter x 2 Cutting Length x 34 Shank x 4-12 Length Solid Carbide

Southeast Tool SE280024 Diamond-Tipped Router Bit, 1+1, 3/4″ Diameter x 2″ Cutting Length x 3/4″ Shank x 4-1/2″ Length, Solid Carbide

Southeast Tool SE280024 Diamond-Tipped Router Bit, 1+1, 3/4″ Diameter x 2″ Cutting Length x 3/4″ Shank x 4-1/2″ Length, Solid Carbide - Solid carbide bits. Carbide is brittle, however, and rough handling, misuse, or misalignment can lead to broken tools and/or poor tool life. Solid carbide cutting tools, such as drills and end mills, are thermally stable and offer high resistance to abrasive wear.

 

Southeast Tool SE2561 Downshear Flush Trim 14 Shank 12 Cutting Diameter 58 Cutting Length 2-14 Length Carbide-Tipped

Southeast Tool SE2561 Downshear Flush Trim, 1/4″ Shank, 1/2″ Cutting Diameter, 5/8″ Cutting Length, 2-1/4″ Length, Carbide-Tipped

Southeast Tool SE2561 Downshear Flush Trim, 1/4″ Shank, 1/2″ Cutting Diameter, 5/8″ Cutting Length, 2-1/4″ Length, Carbide-Tipped - Do not come in contact with embedded rebar when using a carbide tipped drill bits used for hammer drilling. Carbide tipped drill bits should be kept in a suitable containers to help prevent damage if the bit is dropped or mishandled. Carbide-tipped bits. Masonry drill bit.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.