Top 16 Flush Trim Routers for 2020

 

Yonico 14137 PatternFlush Trim Router Bit with 34-Inch W X 1-12-Inch H 12-Inch Shank #ad

Yonico 14137 Pattern/Flush Trim Router Bit with 3/4-Inch W X 1-1/2-Inch H 1/2-Inch Shank

Yonico 14137 Pattern/Flush Trim Router Bit with 3/4-Inch W X 1-1/2-Inch H 1/2-Inch Shank #ad - Shank 1/2″, width 3/4″, cutter height 1-1/2″. In a router table, template will be positioned underneath the work piece. Great for combined plunge-cutting and pattern and template routing. Can be used without the bearing as a standard straight bit. For increased work piece visibility, use in a handheld router allowing the template to be positioned on top of the work piece. Two flute carbide cutters with enclosed ball bearing.

 

Yonico 14148 Flush Trim Router Bit End Bearing with 34-Inch X 1-Inch 12-Inch Shank #ad

Yonico 14148 Flush Trim Router Bit End Bearing with 3/4-Inch X 1-Inch 1/2-Inch Shank

Yonico 14148 Flush Trim Router Bit End Bearing with 3/4-Inch X 1-Inch 1/2-Inch Shank #ad - Satisfaction guaranteed & lifetime warranty. Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed and lifetime warranty. Industrial quality router bits. Build-up and heat resistant teflon coating. C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating.

 

Yonico 14134 Flush Trim Router Bit with 2-Inch Long Cutter Top and Bottom Bearing 12-Inch Shank #ad

Yonico 14134 Flush Trim Router Bit with 2-Inch Long Cutter, Top and Bottom Bearing 1/2-Inch Shank

Yonico 14134 Flush Trim Router Bit with 2-Inch Long Cutter, Top and Bottom Bearing 1/2-Inch Shank #ad - Especially useful for template work when routing rounded or curvy wood. The top and bottom bearings allow you to flip over the wood stock when you reach “up-grain” and rout that segment in a “down-grain” direction, maintaining uniform smoothness around the work-piece. The yonico 14134 top and bottom bearing router bit is great for all your large stock trim applications. This bit can be used with either a top or bottom template.

 

Yonico 14983 Flush Trim Router Bit Top Bottom Bearing - 1 H 14 Shank #ad

Yonico 14983 Flush Trim Router Bit Top & Bottom Bearing – 1″ H 1/4″ Shank

Yonico 14983 Flush Trim Router Bit Top & Bottom Bearing – 1″ H 1/4″ Shank #ad - The yonico 14983 top and bottom bearing router bit is great for all your trim applications. The top and bottom bearings allow you to flip over the wood stock when you reach “up-grain” and rout that segment in a “down-grain” direction, maintaining uniform smoothness around the work-piece. This bit can be used with either a top or bottom template. Especially useful for template work when routing rounded or curvy wood with sensitive end-grains.

 

WHITESIDE PART 2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT WBEARING 12 DIA X 1 CL X 14 SHANK #ad

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1″ CL X 1/4″ SHANK

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1″ CL X 1/4″ SHANK #ad - Uses the highest quality american made micrograin carbide. American made for the american woodworker. Made from solid alloy steel. Made with thick carbide for extra sharpenings. Precision ground for proper balance at high rpms.

 

Freud 50-116 Top Bearing Flush Trim Router Bit 34 Diameter by 1 Carbide Cutting Length 12 Shank #ad

Freud 50-116 Top Bearing Flush Trim Router Bit, 3/4″ Diameter by 1″ Carbide Cutting Length 1/2″ Shank

Freud 50-116 Top Bearing Flush Trim Router Bit, 3/4″ Diameter by 1″ Carbide Cutting Length 1/2″ Shank #ad - Features freud’s tico hi-density carbide with titanium for long life and a flawless finish. Freud’s limited lifetime guarantee. Cuts all composition materials, plywoods, hardwoods, and softwoods. Non-stick perma-shield coating that reduces gumming, rusting, and corrosion for longer life with less wear. Easy and simple use kit. The product is 1 inch top bearing trim bit. The product is manufactured in china. 3/4-inch diameter, 1-inch carbide cutting length, 1/2-inch shank.

 

Freud 50-130 1-12-Inch Diameter Top Bearing Flush Trim Router Bit with 12-Inch Shank #ad

Freud 50-130 1-1/2-Inch Diameter Top Bearing Flush Trim Router Bit with 1/2-Inch Shank

Freud 50-130 1-1/2-Inch Diameter Top Bearing Flush Trim Router Bit with 1/2-Inch Shank #ad - Precision ground for the smoothest cuts. Kickback reducing design. Individually computer balanced. Covered by freud’s limited lifetime warranty.

 

Freud 66-100A 14-Inch Solid Carbide Flush Trim Router Bit with 14-Inch Shank #ad

Freud 66-100A 1/4-Inch Solid Carbide Flush Trim Router Bit with 1/4-Inch Shank

Freud 66-100A 1/4-Inch Solid Carbide Flush Trim Router Bit with 1/4-Inch Shank #ad - Covered by freud’s limited lifetime warranty. The self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Our solid carbide flush trim bits will cut plastic laminate quickly and cleanly.

 

Bosch 85216MC 12-Inch Diameter 1-Inch Cut Triple Flute Laminate Flush Trim Router Bit 14-Inch Shank With Ball Bearing #ad

Bosch 85216MC 1/2-Inch Diameter 1-Inch Cut Triple Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing

Bosch 85216MC 1/2-Inch Diameter 1-Inch Cut Triple Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing #ad - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Freud 85-227 34-Inch Diameter by 1-34-Inch Height Solid Surface Flush Trim Router Bit with 12-Inch Shank #ad

Freud 85-227 3/4-Inch Diameter by 1-3/4-Inch Height Solid Surface Flush Trim Router Bit with 1/2-Inch Shank

Freud 85-227 3/4-Inch Diameter by 1-3/4-Inch Height Solid Surface Flush Trim Router Bit with 1/2-Inch Shank #ad - Cuts all solid surface materials. Specially formulated carbide is ideal for fabricating solid surface materials. Bit #85-227 features non-marring synthetic bearing to protect finished edges. Flush trimming of solid surface materials. Spiral flush trim bits deliver very fast, clean cuts in thick tops.

 

Whiteside Router Bits 2702 Combination Flush Trim Bit with Top and Bottom Bearing #ad

Whiteside Router Bits 2702 Combination Flush Trim Bit with Top and Bottom Bearing

Whiteside Router Bits 2702 Combination Flush Trim Bit with Top and Bottom Bearing #ad - Committed to quality. Made in america. Whiteside machine company. Family owned and operated. Today, whiteside machine occupies a 40,000 sq. Whiteside machine company was founded in 1970 as a general purpose machine shop in the basement of bill & bobbie whiteside’s home. Come on, give us a try. Whiteside machine company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. As always, whiteside machine is continuously striving to improve our product through new technology, improved production techniques, and ongoing research and development efforts along with rigid quality control, vital customer feedback and extensive field testing. Located in western north carolina near the furniture manufacturing town of hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. Ft. Whiteside’s quality, innovation, and customer commitment is still present in our superb product line, in the design of custom tooling to fill special customer requirements, and in the development of special machinery and tooling for our own manufacturing use. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Several woodworking magazines have tested whiteside versus the competition and selected whiteside as the winner for best router bits available in the market.

 

Bosch 85441M 12-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 12-Inch Shank With Ball Bearing #ad

Bosch 85441M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 1/2-Inch Shank With Ball Bearing

Bosch 85441M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 1/2-Inch Shank With Ball Bearing #ad - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Vermont American 23160 38-by-916-Inch Flush Trim Router Bit 14-Inch Shank #ad

Vermont American 23160 3/8-by-9/16-Inch Flush Trim Router Bit, 1/4-Inch Shank

Vermont American 23160 3/8-by-9/16-Inch Flush Trim Router Bit, 1/4-Inch Shank #ad - Razor sharp cutting edge diamond honed for smooth cuts. Industrial micrograin carbide for smooth cut. For fast, smooth trimming and through cutting of laminates, plywood, paneling and other materials. Triple tempered shank for maximum durability.

 

Yonico 14139q Flush Trim Router Bit End Bearing with 12 x 1-15 14 Shank #ad

Yonico 14139q Flush Trim Router Bit, End Bearing with 1/2″ x 1-1/5″ 1/4″ Shank

Yonico 14139q Flush Trim Router Bit, End Bearing with 1/2″ x 1-1/5″ 1/4″ Shank #ad - Satisfaction guaranteed & limited lifetime warranty. Perfect for flush trimming and template work. This flush trim router bit has a cutting height of 1-3/16″ and a diameter of 1/2″ with an end (bottom) bearing the shank is 1/4″ in diameter. Premium quality c3 micro-grain carbide cutters with silver induction brazing for maximum strength. For use in handheld or table mounted router.

 

uxcell Dual Flutes 14 x 38 Straight Flush Trim Router Cutter Bit Bearing #ad

uxcell® Dual Flutes 1/4″ x 3/8″ Straight Flush Trim Router Cutter Bit Bearing

uxcell® Dual Flutes 1/4″ x 3/8″ Straight Flush Trim Router Cutter Bit Bearing #ad - Net weight 19gpackage content 1 x flush trim router cutter. Flute length 25mm/ 1″total length 65mm/ 255″. Product name flush trim router cuttermaterial metal. Material metalcolor silver tone. Cutting diameter 9525mm/ 3/8″shank diamter 635mm/ 1/4″.

 

Amana Tool 47126 Flush Trim Extra Long with Ball Bearing Guide 12-Inch Diameter by 2-Inch Cutting Height by 12-Inch Shank Carbide Tipped Router Bit #ad

Amana Tool 47126 Flush Trim Extra Long with Ball Bearing Guide 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit

Amana Tool 47126 Flush Trim Extra Long with Ball Bearing Guide 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit #ad - The two-flute configuration cuts fast and produces a smooth finish. Amana 47126 specifications diameter 1/2″ carbide height 2″ shank 1/2″ length 4-1/4″ flutes 2 amana 47126 features use this bit for template or pattern work where the workpiece is unusually thick. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut. For a superior finish, use the three-flute version.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.