Top 14 Carbon Steel Taps

 

High Carbon Steel Tap and HSS Drill Bit Sets - set drill tap hanson

High Carbon Steel Tap and HSS Drill Bit Sets – set drill & tap hanson

High Carbon Steel Tap and HSS Drill Bit Sets – set drill & tap hanson - Tap type, plug. Thread, tpi or pitch, 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf, 12, 24 nc, 1/4 in, 20 nc. Includes, taps, tr-1e t-handle tap wrench, plastic case. Quantity, 13 per set. Material, high carbon steel.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer 12-20 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 1/2″-20 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 1/2″-20 UNF - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Irwin Tools 2531- 3 Piece Set - 10 - 32 NF High Carbon Steel Machine Screw Tap

Irwin Tools 2531- 3 Piece Set – 10 – 32 NF, High Carbon Steel Machine Screw Tap

Irwin Tools 2531- 3 Piece Set – 10 – 32 NF, High Carbon Steel Machine Screw Tap - Dimensions overall product weight -0. -Taps produce a class 2b thread. Number of bits -1. 06 pounds. 585-2531 features -ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Designed for hand threading work in a variety of materials. -Straight flutes are ground to provide rapid chip removal for efficient threading.

 

Drillco 2700E Series Carbon Steel Tap Uncoated Bright Finish Round Shank with Square End Pipe Chamfer 38-18 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/8″-18 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/8″-18 Size - Made of carbon steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Drillco 2700E Series Carbon Steel Tap Uncoated Bright Finish Round Shank with Square End Pipe Chamfer 12-14 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2″-14 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 1/2″-14 Size - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Made of carbon steel.

 

Irwin Tools 2636- 3 Piece High Carbon Steel - Tap 38 - 24 NF

Irwin Tools 2636- 3 Piece High Carbon Steel – Tap 3/8″ – 24 NF

Irwin Tools 2636- 3 Piece High Carbon Steel – Tap 3/8″ – 24 NF - 23 pounds. 585-2636 features -ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. Number of bits -1. -Designed for hand threading work in a variety of materials. Dimensions overall product weight -0. -Taps produce a class 2b thread.

 

Drill America DWT40PC-HEX 4-12 Carbon Steel Tap and Die Set with Hex Die

Drill America DWT40PC-HEX #4-1/2″ Carbon Steel Tap and Die Set with Hex Die

Drill America DWT40PC-HEX #4-1/2″ Carbon Steel Tap and Die Set with Hex Die - #4 x 1/2″ cs tap & die set with hex die. Tap & die set, #4-1/2 carbon steel tap set with hex dies. Carbon steel for re-threading. Comes in plastic carrying case.

 

Irwin Tools 2639- 3 Piece High Carbon Steel - Tap 716 - 14 NC

Irwin Tools 2639- 3 Piece High Carbon Steel – Tap 7/16″ – 14 NC

Irwin Tools 2639- 3 Piece High Carbon Steel – Tap 7/16″ – 14 NC - -Designed for hand threading work in a variety of materials. Number of bits -1. 585-2639 features -ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Taps produce a class 2b thread. . 22 pounds. Dimensions overall product weight -0.

 

Drillco 2700E Series Carbon Steel Tap Uncoated Bright Finish Round Shank with Square End Pipe Chamfer 34-14 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/4″-14 Size

Drillco 2700E Series Carbon Steel Tap, Uncoated (Bright) Finish, Round Shank with Square End, Pipe Chamfer, 3/4″-14 Size - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Made of carbon steel. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Vermont American 21662 8-Inch 32 NC Number 29 High Carbon Steel Tap and Drill Bit Combo Set

Vermont American 21662 8-Inch 32 NC Number 29 High Carbon Steel Tap and Drill Bit Combo Set

Vermont American 21662 8-Inch 32 NC Number 29 High Carbon Steel Tap and Drill Bit Combo Set - Unit material -steel. -Produced to exacting specifications. -Four flutes for maximum chip clearance. Dimensions overall product weight -0. Product type -screwdriver bits. -Drill size permanently marked on each tap. Use material -metal. 21662 features -for drilling the proper hole size and cutting internal threads. 02 pounds. Use -drill bits.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Plug Chamfer 516-24 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 5/16″-24 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 5/16″-24 UNF - Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Irwin Tools 2654- 3 Piece High Carbon Steel - Tap 58-18 NF

Irwin Tools 2654- 3 Piece High Carbon Steel – Tap 5/8″-18 NF

Irwin Tools 2654- 3 Piece High Carbon Steel – Tap 5/8″-18 NF - Convenient plastic pouch puts all the necessary taps at your finger tips. Ideal for auto repair and machinery. Each set includes 1 taper, bottoming and plug tap in the specified size. High carbon steel construction for durability.

 

Irwin Tools 2629- 3 Piece High Carbon Steel- Tap 516 - 24 NF

Irwin Tools 2629- 3 Piece High Carbon Steel- Tap 5/16″ – 24 NF

Irwin Tools 2629- 3 Piece High Carbon Steel- Tap 5/16″ – 24 NF - -Taps produce a class 2b thread. 13 pounds. Dimensions overall product weight -0. Number of bits -1. -Designed for hand threading work in a variety of materials. -Straight flutes are ground to provide rapid chip removal for efficient threading. 585-2629 features -ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer 1-14-7 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 1-1/4″-7 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 1-1/4″-7 UNC - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Made of carbon steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.