Coolest 23 Miter Router Bits

 

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 12-Inch Stock 12-Inch Shank by Yonico

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico - C3 micro-grain tungsten carbide cutters. Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Solid hardened steel bodies with anti-kickback design. Yonico 15129 small lock miter router bit with 45-degree 1/2-inch stock 1/2-inch shank.

 

PORTER-CABLE 43503 45-Degree Lock Miter Router Bit 12-Inch Shank Carbide-Tipped

PORTER-CABLE 43503 45-Degree Lock Miter Router Bit, 1/2-Inch Shank, Carbide-Tipped

PORTER-CABLE 43503 45-Degree Lock Miter Router Bit, 1/2-Inch Shank, Carbide-Tipped - 1/2 inch shank. Carbide tipped.

 

Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 34-Inch Stock 12-Inch Shank

Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 3/4-Inch Stock 1/2-Inch Shank

Yonico 15127 Medium Lock Miter Router Bit with 45-Degree 3/4-Inch Stock 1/2-Inch Shank - Simply set the center of the stock to the center of the bit. Two flute carbide cutters & 1/2″ shank. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Use the reversible 45° lock miter glue joint router bit to join boards at 90°. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. Then, cut one piece horizontally and the second one vertically. Ideal for use with 3/4″ stock.

 

Yonico 15122 Large Lock Miter Router Bit with 45-Degree and 1-Inch Stock 12-Inch Shank

Yonico 15122 Large Lock Miter Router Bit with 45-Degree and 1-Inch Stock 1/2-Inch Shank

Yonico 15122 Large Lock Miter Router Bit with 45-Degree and 1-Inch Stock 1/2-Inch Shank - Two flute carbide cutters & 1/2″ shank. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Simply set the center of the stock to the center of the bit. Use the reversible 45° lock miter glue joint router bit to join boards at 90°. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. Use with stock ranging from 1/2″ to 1″. Then, cut one piece horizontally and the second one vertically.

 

EnPoint Titanium Coated Carbide-Tipped Double Edge Miter Folding V Groove Router Bit 1564 6mm Shank 90 °16mm Cutter Dia 3D Sign Making Lettering Engraving Tool Woodworking Chamfer Bevel Cutter

EnPoint® Titanium Coated Carbide-Tipped Double Edge Miter Folding V Groove Router Bit 15/64″ 6mm Shank 90 °16mm Cutter Dia 3D Sign Making Lettering Engraving Tool Woodworking Chamfer Bevel Cutter

EnPoint® Titanium Coated Carbide-Tipped Double Edge Miter Folding V Groove Router Bit 15/64″ 6mm Shank 90 °16mm Cutter Dia 3D Sign Making Lettering Engraving Tool Woodworking Chamfer Bevel Cutter - Produced from medium carbon steel and super fine mirror-like finish for more precision shank size. Routing v-shaped grooves, ideal for wall panel fabrication mainly used for acrylics & plastics, carbon fiber, chipboard, laminated veneers, mdf, pcb, solid surface, wood and wood composite materials. Carbide-tipped cutting edge brings sharper cutting experience and reduces chance of burring. With use of high-frequency welding comes outstanding longevity, little chance of breaking. Titanium coating for more durable to high temperature and easier chip evacuation the high-speed steel body for high hardness, wear-resisting and heat-resisting.

 

XNEMON Small Lock Miter Router Bit 45¡ã 12 Stock 12 Shank Tenon Cutter Floor Handmade Milling Cutter for Woodworking

XNEMON Small Lock Miter Router Bit 45¡ã 1/2″ Stock 1/2″ Shank Tenon Cutter Floor Handmade Milling Cutter for Woodworking

XNEMON Small Lock Miter Router Bit 45¡ã 1/2″ Stock 1/2″ Shank Tenon Cutter Floor Handmade Milling Cutter for Woodworking - Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design.

 

45 Lock Miter Router Bit -12 in Shank by Rockler

45 Lock Miter Router Bit -1/2 in Shank by Rockler

45 Lock Miter Router Bit -1/2 in Shank by Rockler - 45 lock miter router bit -1/2 in shank. Anti-kickback design, ptfe-coated to prevent pitch build-ups. 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Provides a fast, accurate way to build a strong, tight 45º joints. Very popular for kitchen corner cabinets, entertainment centers, kitchen islands and corner hutches.

 

225 Degree Lock Miter Router Bits - SHK 12  LD 1-1532  CL 1516

22.5 Degree Lock Miter Router Bits – SHK 1/2 | LD 1-15/32 | CL 15/16

22.5 Degree Lock Miter Router Bits – SHK 1/2 | LD 1-15/32 | CL 15/16 - Legend below explains sizing. Industrial quality cutting bits manufactured in the usa by southeast tool. Note this bit is to be used in a router table application and not in a hand-held router. Our carbide-tipped 22. Select your item(s) then click add to cart. Legend below explains sizing. 5 degree lock miter router bits are great for drawer or box glue joints and will add strength to any project. Select your item(s) then click add to cart.

 

Freud 2-34 Diameter Lock Miter Router Bit with 12 Shank 99-034

Freud 2-3/4″ Diameter Lock Miter Router Bit with 1/2″ Shank (99-034)

Freud 2-3/4″ Diameter Lock Miter Router Bit with 1/2″ Shank (99-034) - Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Use on 1/2″ to 1″ stock. Ideal for humidors and jewelry boxes run one board vertically and run the piece to be joined horizontally. Cuts all composition materials, plywoods, hardwoods, and softwoods. Easy to join by running one board vertically and the joining board horizontally. Computer-balanced for vibration-free operation. 2-3/4-inch bit diameter 1/2-inch shank diameter. Ideal for creating interlocking 90° corner joints. Produces locking miter joints in a snap. Precision-ground carbide bits are made with added titanium impervious to chemical attack.

 

45° Lock Miter Router Bit -12 in Shank

45° Lock Miter Router Bit -1/2 in Shank

45° Lock Miter Router Bit -1/2 in Shank - Once cut, the miters interlock mechanically, and clamping is easy since the parts can’t slide around. Tight miter joints are a hallmark of fine woodworking, and this bit will cut them in spades. Machining parts with the lock miter bit is easy—with the bit height set, one part is cut horizontally on the router table, while the corresponding part is cut vertically. There is also more gluing area, so the joint is stronger than a straight miter. To make setting the cutter height easy and fool-proof, use the rockler router bit set-up jig (53817, sold separately) to center the bit on your stock. The bit is ideal for joining drawer boxes, cabinet parts, and for building 4-sided columns.

 

SKIL 91703 Lock Miter Router Bit by Skil

SKIL 91703 Lock Miter Router Bit by Skil

SKIL 91703 Lock Miter Router Bit by Skil - Diameter size 1-3/4-inchcutter length 13/16-inchoverall length 15/16-inchmanufactured and designed to the highest quality standardscontrolled depth of cut minimizes kickback.

 

Freud 99-035 45-Degree Lock Miter Router Bit with 12 Shank 78 Height

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2″ Shank (7/8″ Height)

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2″ Shank (7/8″ Height) - Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Overall diameter 2-11/64-inch, shank diameter 1/2-inch. Freud’s philosophy is woodworkers should expect safety, not pay for it. Freud’s precision ground carbide bits have a grain size smaller than other grades and titanium is added making them impervious to chemical attack.

 

450 Degree Lock Miter Router Bits - SHK 12  LD 3-12  CL 1-58

45.0 Degree Lock Miter Router Bits – SHK 1/2 | LD 3-1/2 | CL 1-5/8

45.0 Degree Lock Miter Router Bits – SHK 1/2 | LD 3-1/2 | CL 1-5/8 - 0 degree lock miter router bits are great for drawer or box glue joints and will add strength to any project. Select your item(s) then click add to cart. Note this bit is to be used in a router table application and not in a hand-held router. Legend below explains sizing. Our carbide-tipped 45. Industrial quality cutting bits manufactured in the usa by southeast tool.

 

Woodtek 820697 Router Bits Joinery Lock Miter Lock Miter Bit 12 Shank

Woodtek 820697, Router Bits, Joinery, Lock Miter, Lock Miter Bit, 1/2″ Shank

Woodtek 820697, Router Bits, Joinery, Lock Miter, Lock Miter Bit, 1/2″ Shank - . Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Imported. Positive shear angle places less demand upon your routing equipment. Woodtek® carbide-tipped lock miter router bits are ideal for creating interlocking corner joints, use with table-mounted portable routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Cnc-machining to +/-0. Tall cutter height accomodates multiple stock sizes. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality.

 

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 12-Inch Shank Set of 3

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3

Yonico 15334 Lock Miter 45-Degree Glue Joint Router Bits 1/2-Inch Shank, Set of 3 - When positioned properly, one mitre bit will cut both pieces of stock without having to adjust the bit. Two flute carbide router bit cutters and 1/2″ shanks. The yonico 15334 lock miter bits set is reversible. The yonico 15334 lock mitre set includes 3 of the most popular lock miter bits for a range of stock sizes. The largest miter lock bit has a 2-3/4″ diameter and is suited for up to 1″ thick stock.   The interlocking 45° miter lock cuts will produce extremely strong joints without having to struggle to keep boards in place during clamping. Set comes in a solid wood storage case. Additionally, lock miter cuts will provide extra gluing surface resulting in an extremely strong and durable joint. The smallest miter lock bit is 1-3/8″ diameter and will work best with 1/2″ stock. With fence in place, set the center of the stock to the center of the miter bit. Then, cut one piece of stock horizontally and the second one vertically. The medium sized lock miter router bit has a 2″ diameter and is suited for 3/4″ stock. Use the yonico 15334, 45° lock miter router bit set to join boards at 90°.

 

Bosch 84508M 3-18-Inch Diameter 1-38-Inch Cut Carbide Tipped Lock Miter Router Bit 12-Inch Shank

Bosch 84508M 3-1/8-Inch Diameter 1-3/8-Inch Cut Carbide Tipped Lock Miter Router Bit 1/2-Inch Shank

Bosch 84508M 3-1/8-Inch Diameter 1-3/8-Inch Cut Carbide Tipped Lock Miter Router Bit 1/2-Inch Shank - The fully hardened and tempered steel shank provides ultimate durability. Lock miter bit allows materials to join at 90° by cutting a 45° miter and perfect matching tongue and groove glue joint. Premium-quality micro grain carbide tips are ground on specialized cnc equipment for an extra-fine finish with maximum sharpness and edge retention. This joint not only increases mechanical strength, but also increases glue surface area and automatically aligns parts.

 

Amana Tool 55390 45-Degree Lock Miter 2-1116-Inch Diameter by 12-Inch Shank Router Bit

Amana Tool 55390 45-Degree Lock Miter 2-11/16-Inch Diameter by 1/2-Inch Shank Router Bit

Amana Tool 55390 45-Degree Lock Miter 2-11/16-Inch Diameter by 1/2-Inch Shank Router Bit - For 1/2, 1-1/8-inch material. Max rpm = 18,000. Full color instructions included learn step-by-step with master craftsman lonnie bird. Carbide tipped, industrial quality. 2-11/16 diameter, 1-3/16-inch cutting height, 45 degree radius, 1/2-inch shank.

 

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 12-Inch Stock 12-Inch Shank

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank - Then, cut one piece horizontally and the second one vertically. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. When positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Use the reversible 45° lock miter glue joint router bit to join boards at 90°. Simply set the center of the stock to the center of the bit. Two flute carbide cutters & 1/2″ shank. Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. Ideal for use with 1/2″ stock. .

 

Freud 99-043 Lock Miter Router Bit 22-12ð 12 Shank With TiCo Hi-Density Carbide by Freud

Freud 99-043 Lock Miter Router Bit 22-1/2Ã’° 1/2 Shank With TiCo Hi-Density Carbide by Freud

Freud 99-043 Lock Miter Router Bit 22-1/2Ã’° 1/2 Shank With TiCo Hi-Density Carbide by Freud - Use on cnc and other automatic routers, as well as table-mounted portable routersshear angle design produces superior finishperma-shield coating to resist heat. Features freud’s tico hi-density carbide with titanium for long life and a flawless finishcuts all composition material, plywood, hardwoods, and softwoods.

 

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 12-Inch Stock 12-Inch Shank by Yonico

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico

Yonico 15129 Small Lock Miter Router Bit with 45-Degree 1/2-Inch Stock 1/2-Inch Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warrantybuild-up and heat resistant teflon coatingsatisfaction guaranteed and lifetime warranty.

 

Freud 99-035 45-Degree Lock Miter Router Bit with 12 Shank 78 Height by Freud

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2 Shank (7/8 Height) by Freud

Freud 99-035 45-Degree Lock Miter Router Bit with 1/2 Shank (7/8 Height) by Freud - This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. Freud 99-035 45-degree lock miter router bit with 1/2 shank (7/8 height). Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced.

 

22-2 Degree Locking Miter Router Bit Set - 2PC Set

22-/2 Degree Locking Miter Router Bit Set – 2PC Set

22-/2 Degree Locking Miter Router Bit Set – 2PC Set - Cnc milling technology producing a balanced, smooth cutting bit. The shanks on this set are 1/2″ the set comes in a wooden storage box. Perfect for making pedestals and more will work with stock up to 3/4 in thickness. Carbide cutters with non-stick coating to reduce pitch and build-up. Use to make 8 sided boxes without having to calculate the angle.

 

Infinity Tools 55-503 12 Shank Lock Miter Router Bit

Infinity Tools 55-503, 1/2″ Shank Lock Miter Router Bit

Infinity Tools 55-503, 1/2″ Shank Lock Miter Router Bit - Micro-grain carbide tips for a long life and repeated sharpening. 2-3/4″ cutter diameter x 1-3/16″ cutter height. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Use with stock from 5/8″ to 1-1/8″ thick.