Coolest 20 Paring Chisels

 

Paring Chisel With Cranked Neck - 13 mm 12

Paring Chisel With Cranked Neck – 13 mm (1/2”)

Paring Chisel With Cranked Neck – 13 mm (1/2”) - Fully ground and sharpened. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Handle stained hornbeam wood, brass-plated ferrule. Length of the blade 122 mm (480315 inch) — total length 256 mm (1007874). Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc.

 

Paring Chisel 06 mm 14

Paring Chisel 06 mm (1/4″)

Paring Chisel 06 mm (1/4″) - Handle stained hornbeam wood, brass-plated ferrule. Thin sides for sidewall clearance. Fully ground and sharpened. Blade length 245 mm [965 inch] / total length 390 mm [1535 inch]. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc.

 

38 Robert Sorby  241 Paring Chisel

3/8″ Robert Sorby # 241 Paring Chisel

3/8″ Robert Sorby # 241 Paring Chisel - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Contains both right and left skew chisel 6 mm 1/4″ wide. Handles mades from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Made by a small tool manufacturer in the czech republic.

 

Diefenbacher 1 14 Bent Paring Chisel

Diefenbacher 1 1/4″ Bent Paring Chisel

Diefenbacher 1 1/4″ Bent Paring Chisel - These beautiful tools are fitted with 6. Bent shank paring chisels are used for delicate trimming and fitting. The chisel shank is bent up and away form the blade holding the handle clear of the surface being trimmed. 25 inch hardwood handles and have an average blade length of 6. 75 inches. This unique feature allows the user to work in areas that would be impossible to reach with a conventional chisel.

 

Matsumura Japanese White Steel Paring Chisel - 51mm - 2

Matsumura Japanese White Steel Paring Chisel – 51mm – 2″

Matsumura Japanese White Steel Paring Chisel – 51mm – 2″ - Mr. Traditional woodworkers use them to trim intricate joints to finished dimension. The “push” style handles are hand-turned from best quality akagashi (japanese red oak). Matsumura hand forges each blade from the best quality “white” steel laminated onto wrought iron. They are thenindividually tempered to rockwell rc 64. Paring chisels are delicate and finely made and are used for finish and paring cuts. The average length is 14″ and the blade length is 3-1/2″. Each chisel comesfully sharpened and polished.

 

34 Robert Sorby 241 Paring Chisel

3/4″ Robert Sorby #241 Paring Chisel

3/4″ Robert Sorby #241 Paring Chisel - Made by a small tool manufacturer in the czech republic. Handles mades from super hard european hornbeam. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Bevel ground at 30 degree skew and a 25 degree bevel. Contains both right and left skew chisel 12 mm 1/2″ wide.

 

Diefenbacher 38 Paring Chisel

Diefenbacher 3/8″ Paring Chisel

Diefenbacher 3/8″ Paring Chisel - 75″. The extra-long blade and handle allow you to hold the tool against your body so you can use your weight and motion to achieve a controlled cut not possible with regular chisels. 25″ hardwood handles and have an average blade length of 6. If you’ve never used a paring chisel, you’re missing one of the real pleasures of hand tool woodworking. These fine chisels are fitted with 6. Paring chisels, goth straight and bent-shank, are used for delicate trimming and fitting.

 

Narex Pair Right Left 12 mm 12 Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662 - Handles made from super hard european hornbeam. Pair of chisels comes in a wooden presentation box. Contains both right and left skew chisel 12 mm 1/2″ wide. Bevel ground at 30 degree skew and a 25 degree bevel. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59.

 

WoodRiver Bent Paring Chisel 34

WoodRiver Bent Paring Chisel 3/4″

WoodRiver Bent Paring Chisel 3/4″ - . We’ve taken our standard woodriver bench chisel and bent the tang at about an 18° angle. Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners. That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface.

 

Paring Chisel With Cranked Neck - 6 mm 14

Paring Chisel With Cranked Neck – 6 mm (1/4”)

Paring Chisel With Cranked Neck – 6 mm (1/4”) - Handle stained hornbeam wood, brass-plated ferrule. Length of the blade 118 mm (464567 inch) — total length 252 mm (992126). Fully ground and sharpened. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel.

 

Narex Right Left 6 mm 14 Skew Paring Chisels 811106811156

Narex Right & Left 6 mm 1/4″ Skew Paring Chisels 811106/811156

Narex Right & Left 6 mm 1/4″ Skew Paring Chisels 811106/811156 - Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Made by a small tool manufacturer in the czech republic. Contains both right and left skew chisel 6 mm 1/4″ wide. Bevel ground at 30 degree skew and a 25 degree bevel. Handles mades from super hard european hornbeam.

 

Diefenbacher 1 Paring Chisel

Diefenbacher 1″ Paring Chisel

Diefenbacher 1″ Paring Chisel - 75″. 25″ hardwood handles and have an average blade length of 6. Paring chisels, goth straight and bent-shank, are used for delicate trimming and fitting. If you’ve never used a paring chisel, you’re missing one of the real pleasures of hand tool woodworking. These fine chisels are fitted with 6. The extra-long blade and handle allow you to hold the tool against your body so you can use your weight and motion to achieve a controlled cut not possible with regular chisels.

 

12 Robert Sorby 241 Paring Chisel by Robert Sorby

1/2 Robert Sorby #241 Paring Chisel by Robert Sorby

1/2 Robert Sorby #241 Paring Chisel by Robert Sorby - Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Fully ground and sharpened. Thin sides for sidewall clearance. Handle stained hornbeam wood, brass-plated ferrule. 1/2 robert sorby #241 paring chisel.

 

Diefenbacher 34 Bent Paring Chisel

Diefenbacher 3/4″ Bent Paring Chisel

Diefenbacher 3/4″ Bent Paring Chisel - The chisel shank is bent up and away form the blade holding the handle clear of the surface being trimmed. 75 inches. This unique feature allows the user to work in areas that would be impossible to reach with a conventional chisel. Bent shank paring chisels are used for delicate trimming and fitting. 25 inch hardwood handles and have an average blade length of 6. These beautiful tools are fitted with 6.

 

WoodRiver Bent Paring Chisel 1

WoodRiver Bent Paring Chisel 1″

WoodRiver Bent Paring Chisel 1″ - That provides the necessary relief to enable the user to grasp the handle while keeping the blade of the chisel flat on the work surface. Woodriver® bent paring chisels are a relatively simple solution for removing glue lines, trimming protruding plugs or cleaning out corners. We’ve taken our standard woodriver bench chisel and bent the tang at about an 18° angle.

 

Narex Czech Steel Premium Woodworking Cabinetmakers Paring Chisel with European Hornbeam Handle Sizes 14 12 34 1 1 14 813207-31 12

Narex Czech Steel Premium Woodworking Cabinetmakers Paring Chisel with European Hornbeam Handle Sizes 1/4″ 1/2″ 3/4″ 1″ 1 1/4″ 813207-31 (1/2″)

Narex Czech Steel Premium Woodworking Cabinetmakers Paring Chisel with European Hornbeam Handle Sizes 1/4″ 1/2″ 3/4″ 1″ 1 1/4″ 813207-31 (1/2″) - Blades are 9 1/2′ long, made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Overall lengths are 15 1/2″. Available in thee true imperial sizes 1/4″, 1/2″ 3/4″ 1″ and 1 1/4″. Made by a highly respected edge tool manufacturer in the czech republic. Handles made from waxed european hornbeam and have a solid brass ferrul.

 

Diefenbacher 12 Bent Paring Chisel

Diefenbacher 1/2″ Bent Paring Chisel

Diefenbacher 1/2″ Bent Paring Chisel - The chisel shank is bent up and away form the blade holding the handle clear of the surface being trimmed. 75 inches. These beautiful tools are fitted with 6. This unique feature allows the user to work in areas that would be impossible to reach with a conventional chisel. 25 inch hardwood handles and have an average blade length of 6. Bent shank paring chisels are used for delicate trimming and fitting.

 

Paring Chisel With Cranked Neck - 19 mm 34

Paring Chisel With Cranked Neck – 19 mm (3/4”)

Paring Chisel With Cranked Neck – 19 mm (3/4”) - Handle stained hornbeam wood, brass-plated ferrule. Provide for the cleaning of flat surfaces and others that can not be achieved by normal wood chisel. Forged from highly alloyed cr-mn steel and heat treated up to 59 hrc. Fully ground and sharpened. Length of the blade 131 mm (515748 inch) — total length 276 mm (1086614).

 

Matsumura Japanese White Steel Paring Chisel - 6mm - 14

Matsumura Japanese White Steel Paring Chisel – 6mm – 1/4″

Matsumura Japanese White Steel Paring Chisel – 6mm – 1/4″ - Mr. The “push” style handles are hand-turned from best quality akagashi (japanese red oak). They are thenindividually tempered to rockwell rc 64. Traditional woodworkers use them to trim intricate joints to finished dimension. Each chisel comesfully sharpened and polished. The average length is 14″ and the blade length is 3-1/2″. Paring chisels are delicate and finely made and are used for finish and paring cuts. Matsumura hand forges each blade from the best quality “white” steel laminated onto wrought iron.

 

Iyoroi 2 Kamaji Blue Steel Paring Chisel

Iyoroi 2″ Kamaji Blue Steel Paring Chisel

Iyoroi 2″ Kamaji Blue Steel Paring Chisel - Iyoroi repeatedly folds and forges together the wrought iron material to increase its strength and preserve its malleability. They represent the lifetime culmination of experience and work of three master blacksmiths. The handles are hand-turned from japanese red sandalwood. These chisels are offered to the discriminating woodworker demanding the very best, as well as to those few individuals wanting a piece of the old-time japanese toolmaking tradition. Available in sizes 1/2″, 3/4″, 1″, 1-1/2″, and this product’s size 2″. Overall length is 14″, blade length 3-1/4″. Master blacksmith iyoroi created these kamaji paring chisels from blue steel forge welded to 100+ year old wrought iron. These paring chisels (kinari nomi) characterize the highest form of the chiselmaker’s art. Only the very highest quality materials are used in their construction, following time honored technics from centuries past. After the various forging and tempering process, the wrought iron is acid etched to expose a layered structure similar to wood grain.