Coolest 18 Quick Change Extensions in 2019

 

Kempston 88019 Quick Change Extension Sys Kit #ad

Kempston 88019 Quick Change Extension Sys Kit

Kempston 88019 Quick Change Extension Sys Kit #ad - Use with any type of bit with a 1/4″ quick change hex such as spade bits or auger bits, drill bits. For use when drilling between studs and joists and pulling pull wire through them with the kit conveniently create the right length for the job 18 ” or 36 “sections for different size combinations. Kempston patent pending quick connect extension and installation kit can quickly and easily switch from drilling to pulling with the quick change pulling grip.

 

Disston E0102735 Carded Blu-Mol Quick-Change Extensions Daimeter and Length 14 by 6-Inch #ad

Disston E0102735 Carded Blu-Mol Quick-Change Extensions, Daimeter and Length 1/4 by 6-Inch

Disston E0102735 Carded Blu-Mol Quick-Change Extensions, Daimeter and Length 1/4 by 6-Inch #ad - Fast and easy. Allows for quick access to hard-to-reach locations. Quick change design makes it easy to change from standard wood bore bit to extended wood bore bit.

 

Insty-Bit Quick Change Extension 12 #ad

Insty-Bit Quick Change Extension 12”

Insty-Bit Quick Change Extension 12” #ad - Positive action doesn’t let go until you want it to. Works in all corded and cordless drills. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Only chuck that accepts all standards, ansi, jis and din. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. Replaces all magnetic and non-magnetic bit holders. Black oxide finish with plated steel chuck give excellent corrosion resistance. Quick change hex-shank and hardened extensions optimize drill torque. Fits all keyed and keyless chucks. True one-handed operation, simply push the bit into the chuck. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Patented all-hex design holds bits tight, even when removing bits from holes. Only chuck that holds all screwdriver bits 1″ and longer.

 

Generic YCUS150720-091 8&10851 rew Tiper 14 Hex 14 Hex Shank 2 4 6 3pc Magnetic Bit Quick Change Extensions Holder Screw Tip 3pc Magneti #ad

Generic YCUS150720-091 rew Tiper 1/4 Hex 1/4 Hex Shank 2″ 4″ 6″ 3pc Magnetic Bit Quick Change Extensions Holder Screw Tip 3pc Magneti

Generic YCUS150720-091 rew Tiper 1/4 Hex 1/4 Hex Shank 2″ 4″ 6″ 3pc Magnetic Bit Quick Change Extensions Holder Screw Tip 3pc Magneti #ad - Description 3pc magnetic bit extensions magnetized ends hold bits securely for hard to reach screws and nuts hex shank chucks firmly into drills useful in hand-held drivers accepts any 1/4″ hex bits includes (1) 2¡± extension (1) 4¡± extension (1) 6¡± extension.

 

MAGBIT 782550716QC MAG 782 716-Inch by 5-12-Inch Extension with Quick Change Shank #ad

MAGBIT 782.55.0716QC MAG 782 7/16-Inch by 5-1/2-Inch Extension with Quick Change Shank

MAGBIT 782.55.0716QC MAG 782 7/16-Inch by 5-1/2-Inch Extension with Quick Change Shank #ad - Allows safer use of tool at extended distance. Has quick change shank to fit quick change chucks. Quick change shank. Spring loaded for one handed loading and unloading of quick change bits.

 

Greenlee 921-36 Quick Change Extension 316 by 36-Inch #ad

Greenlee 921-36 Quick Change Extension, 3/16 by 36-Inch

Greenlee 921-36 Quick Change Extension, 3/16 by 36-Inch #ad - Use with any 1/4-inch quick change accessory 3/4-inch diameter and under. Convenient 1/4-inch quick connect receiver accepts most standard quick change accessories. Flexible shaft allows easy access to difficult and tight areas. Multiple extensions can be easily joined to create the perfect length for any job.

 

Irwin Lock-n-Load Quick Change Extension Bit Holder 300mm 38in #ad

Irwin Lock-n-Load Quick Change Extension Bit Holder 300mm 3/8in

Irwin Lock-n-Load Quick Change Extension Bit Holder 300mm 3/8in #ad - Uk’s no 1 hand and power tool seller. Irwin lock-n-load quick change extension bit holder specifications insert bit 3/8 inch . Draper, sealey, bahco, stanley and much more.

 

Greenlee 921 Quick Change Extension Kit by Greenlee #ad

Greenlee 921 Quick Change Extension Kit by Greenlee

Greenlee 921 Quick Change Extension Kit by Greenlee #ad - 4 piece kit with 2 extensions, auger bit and grip pullflexible shaft allows easy access to difficult and tight areasconvenient 1/4-inch quick connect receiver accepts most standard quick change accessoriesmultiple extensions can be easily joined to create the perfect length for any jobuse with any 1/4-inch quick change accessory 3/4-inch diameter and under.

 

Insty-Bit Quick Change Extension 6 #ad

Insty-Bit® Quick Change Extension 6″

Insty-Bit® Quick Change Extension 6″ #ad - Only chuck that accepts all standards, ansi, jis and din. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Positive action doesn’t let go until you want it to. True one-handed operation, simply push the bit into the chuck. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Only chuck that holds all screwdriver bits 1″ and longer. Replaces all magnetic and non-magnetic bit holders. Works in all corded and cordless drills. Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. Quick change hex-shank and hardened extensions optimize drill torque. Fits all keyed and keyless chucks. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Black oxide finish with plated steel chuck give excellent corrosion resistance. Patented all-hex design holds bits tight, even when removing bits from holes. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions.

 

IRWIN Tools 1882442 Impact Performance Series Irwin Quick Change Extension 14-Inch Shank 2 12-Inch Length #ad

IRWIN Tools 1882442 Impact Performance Series Irwin Quick Change Extension, 1/4-Inch Shank, 2 1/2-Inch Length

IRWIN Tools 1882442 Impact Performance Series Irwin Quick Change Extension, 1/4-Inch Shank, 2 1/2-Inch Length #ad - Built for maximum durability and long life with impact drivers. Patented jaw design is compatible with all 1/4″ hex shank accessories including insert bits. Large chuck withstands higher torque demands of impact drills. 1/4″ quick-change shank is designed to work with impact drivers, and reduces slipping in standard drill chucks. Black oxide finish resists corrosion and increases life of extension.

 

Irwin Tools 4935653 Lock-n-Load Quick Change Extension 12 #ad

Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12″

Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12″ #ad - 3/8″ quick change range now holds insert bits magnetic for holding. Lock-n-load quick change extensions. Carbon steel construction sleeve and body for durability and life. Patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. Lock-n-load system for one-handed quick release.

 

Irwin Tools 4935651 Lock-n-Load Quick Change Extension 38 2-34 #ad

Irwin Tools 4935651 Lock-n-Load Quick Change Extension, 3/8″, 2-3/4″

Irwin Tools 4935651 Lock-n-Load Quick Change Extension, 3/8″, 2-3/4″ #ad - Lock-n-load system for one-handed quick release. Carbon steel construction sleeve and body for durability and life. Patented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. 1/4″ quick change range now holds insert bits magnetic for holding. Lock-n-load quick change extensions.

 

MAGBIT 782120716QC MAG 782 716-Inch by 12-Inch Extension with Quick Change Shank #ad

MAGBIT 782.12.0716QC MAG 782 7/16-Inch by 12-Inch Extension with Quick Change Shank

MAGBIT 782.12.0716QC MAG 782 7/16-Inch by 12-Inch Extension with Quick Change Shank #ad - Allows safer use of tool at extended distance. Has standard 7/16-inch shank to fit standard chucks. Spring loaded for one handed loading and unloading of quick change bits. Extends reach of tool.

 

Greenlee 921-18 Quick Change Extension 316 by 18-Inch #ad

Greenlee 921-18 Quick Change Extension, 3/16 by 18-Inch

Greenlee 921-18 Quick Change Extension, 3/16 by 18-Inch #ad - Use with any 1/4-inch quick change accessory 3/4-inch diameter and under. Convenient 1/4-inch quick connect receiver accepts most standard quick change accessories. Multiple extensions can be easily joined to create the perfect length for any job. Flexible shaft allows easy access to difficult and tight areas.

 

Irwin Tools 4935653 Lock-n-Load Quick Change Extension 12 by Irwin Tools #ad

Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12 by Irwin Tools

Irwin Tools 4935653 Lock-n-Load Quick Change Extension, 12 by Irwin Tools #ad - Lock-n-load quick change extensionscarbon steel construction sleeve and body for durability and lifelock-n-load system for one-handed quick releasepatented jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits1/4 quick change range now holds insert bits magnetic for holding.

 

Snappy 4 in Hex Quick Change Chuck Drill Bit Holder Extension fits 14 Impact MADE in USA #ad

Snappy 4 in. Hex Quick Change Chuck Drill Bit Holder Extension fits 1/4 Impact MADE in USA

Snappy 4 in. Hex Quick Change Chuck Drill Bit Holder Extension fits 1/4 Impact MADE in USA #ad - Accepts 1/4″ hex inserts bits in addition to 1/4″ hex power bits. 4″ extension chuck will fit into small spaces or tight against another object. Tools are locked into the drive channel with a uniquely-formed, tempered spring. Extend the reach of your drill with a snappy® quick change extension chuck.

 

Insty Bit T21696 3 Inch All-Hex Quick Change Extension #ad

Insty Bit T21696 3 Inch All-Hex Quick Change Extension

Insty Bit T21696 3 Inch All-Hex Quick Change Extension #ad - Only chuck that holds all screwdriver bits 1″ and longer. The 12″ extension allows most people to reach an 8′ ceiling without a ladder, and you can even line them all up for 21″ of reach not for use with impact tools. Will accept any 1/4″ (6 mm) hex shank accessory, with or without a power groove. Quick change hex-shank and hardened extensions optimize drill torque. Chuck’s small 5/8″ diameter fits through slim holes for increased versatility. Works in all corded and cordless drills. Positive action doesn’t let go until you want it to. Patented all-hex design holds bits tight, even when removing bits from holes. Ideal for use with high speed drill bits, spade bits, hole saws, screwdriver bits and all 1/4″ hex shank power tool accessories. Can’t quite fit your drill into that narrow space no need to get a whole new set of long bits. Black oxide finish with plated steel chuck give excellent corrosion resistance. True one-handed operation, simply push the bit into the chuck. Replaces all magnetic and non-magnetic bit holders. Only chuck that accepts all standards, ansi, jis and din. Just pop any of your existing 1/4″ hex-shank drill bits or driver bits into one of these extensions. Fits all keyed and keyless chucks. Each extension includes a 1″ #1 plain hex phillips bit and a 2″ #2 power groove phillips bit.

 

6 PC Drill Set Quick Change Extension Bar Magnetic Stubby Screw Holder Flex #ad

6 PC Drill Set Quick Change Extension Bar Magnetic Stubby Screw Holder & Flex

6 PC Drill Set Quick Change Extension Bar Magnetic Stubby Screw Holder & Flex #ad - Hex flex extension bar quick change holder stubby magnetic screw holder. Power extension bar 3/8″ dr. Power extension bar 1/2″ dr. Power extension bar 1/4″ dr. 1/4″ dr. 6″, 1/4″ dr. Includes accessories to drive or remove screws, bolts, and nuts in any position.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.