Best and Coolest 25 Thread Sizes

 

Steel Thread Rolling Screw for Plastic Zinc Plated Pan Head Phillips Drive 4-20 Thread Size 14 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #4-20 Thread Size, 1/4″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #4-20 Thread Size, 1/4″ Length (Pack of 100) #ad - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Thread rolling screw recommended for use in plastic.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 4-40 Thread Size 12 Length Fully Threaded Import Pack of 100 #ad

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #4-40 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.

 

Steel Sheet Metal Screw Black Zinc Plated Finish Pan Head Phillips Drive Type AB 6-20 Thread Size 38 Length Pack of 100 #ad

Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto Gerber Mansfield Crane Jacuzzi or Any Flush Valve with Similar Thread Size White Green #ad

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto, Gerber, Mansfield, Crane, Jacuzzi or Any Flush Valve with Similar Thread Size, White, Green

Keeney K835-12 3-Inch Toilet Flush Valve Fits Toto, Gerber, Mansfield, Crane, Jacuzzi or Any Flush Valve with Similar Thread Size, White, Green #ad - 3-inch toilet flush valve. Adjustable water saving flapper. Adjustable no cut overflow tube. Fits toto, gerber, mansfield, crane, jacuzzi toilets or any flush valve with similar thread size. Includes all nuts and washers.

 

Steel Thread Cutting Screw Zinc Plated 82 Degree Flat Head Phillips Drive Type F 516-18 Thread Size 1 Length Pack of 25 #ad

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)

Steel Thread Cutting Screw, Zinc Plated, 82 Degree Flat Head, Phillips Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 8-32 Thread Size 12 Length Fully Threaded Import Pack of 100 #ad

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #8-32 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) #ad - 03125-inches thread length. Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Steel Self-Drilling Screw Zinc Plated Finish Pan Head Star Drive 2 Drill Point 6-20 Thread Size 34 Length Pack of 100 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Sheet Metal Screw Black Oxide Finish Truss Head Phillips Drive Type A 6-18 Thread Size 34 Length Pack of 100 #ad

Steel Sheet Metal Screw, Black Oxide Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Truss Head, Phillips Drive, Type A, #6-18 Thread Size, 3/4″ Length (Pack of 100) #ad - Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 35 mm Length Fully Threaded Imported Pack of 25 #ad

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 35 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 35 mm Length, Fully Threaded, Imported (Pack of 25) #ad - Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Thread rolling screw recommended for use in plastic. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity.

 

Steel Pan Head Machine Screw Zinc Plated Meets JIS B1111 2 Phillips Drive M4-07 Thread Size 25 mm Length Fully Threaded Imported Pack of 25 #ad

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 25 mm Length, Fully Threaded, Imported (Pack of 25)

Steel Pan Head Machine Screw, Zinc Plated, Meets JIS B1111, #2 Phillips Drive, M4-0.7 Thread Size, 25 mm Length, Fully Threaded, Imported (Pack of 25) #ad - Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 Length Pack of 100 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

Nylon 66 Hex Nut Black 14-20 Thread Size 716 Width Across Flats 1564 Thick Pack of 100 #ad

Nylon 6/6 Hex Nut, Black, 1/4″-20 Thread Size, 7/16″ Width Across Flats, 15/64″ Thick (Pack of 100)

Nylon 6/6 Hex Nut, Black, 1/4″-20 Thread Size, 7/16″ Width Across Flats, 15/64″ Thick (Pack of 100) #ad - Several different nut styles fit a variety of application and installation requirements. Nylon 6/6 provides resistance to abrasion, corrosion, and many chemicals and solvents. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. The material is a strong yet lightweight plastic and is nonconductive. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. The nylon 6/6 hex nut has a black color. Nylon 6/6 can either absorb or lose moisture, which may alter its dimensions and mechanical properties. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool.

 

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap Steam Oxide Round Shank with Square End Bottoming Chamfer 14-20 Thread Size H3 Tolerance #ad

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H3 Tolerance

YG-1 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4″-20 Thread Size, H3 Tolerance #ad - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 0625-inches thread length. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

18-8 Stainless Steel Prairie Bolt Plain Finish Flange Socket Cap Head Hex Socket Drive 10-32 Thread Size 0190 Shoulder Diameter 1-18 Grip Length Made in US Pack of 1 #ad

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1)

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1-1/8″ Grip Length, Made in US (Pack of 1) #ad - Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials. Hex socket drive has a hexagonal slot that turns using an allen key driver. Made in usa.

 

Steel Sheet Metal Screw Black Oxide Finish  Pan Head Phillips Drive Type A 10-12 Thread Size 1 Length Pack of 100 #ad

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type A, #10-12 Thread Size, 1″ Length (Pack of 100) #ad - Pan head has a flat top and short vertical sides with a rounded top edge. Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Type a point has a conical tip and spaced threads that are suitable for forming threads in holes drilled in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.

 

Steel Self-Drilling Screw Zinc Plated Finish Sealing Hex Washer Head With EPDM Washer Hex Drive 3 Drill Point 12-24 Thread Size 78 Length Pack of 25 #ad

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25)

Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #3 Drill Point, #12-24 Thread Size, 7/8″ Length (Pack of 25) #ad - Steel is often used in applications where strength is the primary consideration. Sealing hex washer head has a flange with an epdm rubber washer bonded to the underside to resist leakage, loosening, and damage to the mating surface. Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver. Zinc plating resists corrosion and has a reflective appearance.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 3 Phillips Drive 12-24 Thread Size 12 Length Fully Threaded Import Pack of 100 #ad

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #3 Phillips Drive, #12-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #3 Phillips Drive, #12-24 Thread Size, 1/2″ Length, Fully Threaded, Import (Pack of 100) #ad - Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

Steel Thread Rolling Screw for Plastic Black Oxide Finish Pan Head Phillips Drive 8-16 Thread Size 38 Length Pack of 100 #ad

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/8″ Length (Pack of 100)

Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/8″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration. Pan head has a flat top and short vertical sides with a rounded top edge. Thread rolling screw recommended for use in plastic. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish offers mild corrosion resistance and lubricity.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets DIN 7985 3 Phillips Drive M6-1 Thread Size 20 mm Length Fully Threaded Import Pack of 50 #ad

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 20 mm Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets DIN 7985, #3 Phillips Drive, M6-1 Thread Size, 20 mm Length, Fully Threaded, Import (Pack of 50) #ad - Steel is often used in applications where strength is the primary consideration. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.

 

Steel Sheet Metal Screw Zinc Plated Hex Washer Head Slotted Drive Type AB 6-20 Thread Size 38 Length Pack of 100 #ad

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100)

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 3/8″ Length (Pack of 100) #ad - Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Slotted drive has a linear slot for use with a flat-blade driver.

 

18-8 Stainless Steel Prairie Bolt Plain Finish Flange Socket Cap Head Hex Socket Drive 10-32 Thread Size 0190 Shoulder Diameter 1 Grip Length Made in US Pack of 1 #ad

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1″ Grip Length, Made in US (Pack of 1)

18-8 Stainless Steel Prairie Bolt, Plain Finish, Flange Socket Cap Head, Hex Socket Drive, #10-32 Thread Size, 0.190″ Shoulder Diameter, 1″ Grip Length, Made in US (Pack of 1) #ad - Made in usa. 18-8 stainless steel provides good corrosion resistance and strength, while the plain surface has no finish or coating. Designed with unthreaded grip length to fit the thickness of material being fastened and protect it from thread damage. Hex socket drive has a hexagonal slot that turns using an allen key driver. Flange socket cap head is round with a flat top and high profile that provides high strength and has a flange that acts as a washer for use with thin or soft materials.

 

Steel Thread Cutting Screw Zinc Plated Finish Hex Washer Head Slotted Drive Type F 516-18 Thread Size 1 Length Pack of 25 #ad

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25)

Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 5/16″-18 Thread Size, 1″ Length (Pack of 25) #ad - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Slotted drive has a linear slot for use with a flat-blade driver. Hex washer head has a flange for additional grip with the mating surface. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.

 

Steel Sheet Metal Screw Black Oxide Finish  Pan Head Phillips Drive Type AB 10-16 Thread Size 34 Length Pack of 100 #ad

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 100)

Steel Sheet Metal Screw, Black Oxide Finish, Pan Head, Phillips Drive, Type AB, #10-16 Thread Size, 3/4″ Length (Pack of 100) #ad - Steel is often used in applications where strength is the primary consideration, and the black oxide finish offers mild corrosion resistance and lubricity. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Pan head has a flat top and short vertical sides with a rounded top edge.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 1 Phillips Drive 2-56 Thread Size 38 Length Fully Threaded Import Pack of 100 #ad

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #2-56 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #1 Phillips Drive, #2-56 Thread Size, 3/8″ Length, Fully Threaded, Import (Pack of 100) #ad - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration.

 

Steel Sheet Metal Screw Zinc Plated Hex Washer Head Slotted Drive Type AB 6-20 Thread Size 12 Length Pack of 100 #ad

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 1/2″ Length (Pack of 100)

Steel Sheet Metal Screw, Zinc Plated, Hex Washer Head, Slotted Drive, Type AB, #6-20 Thread Size, 1/2″ Length (Pack of 100) #ad - Slotted drive has a linear slot for use with a flat-blade driver. Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a reflective appearance. Hex washer head has six flat sides that a wrench can grip from the side in low-profile applications and has a flange for additional bearing surface to distribute the force over the material being fastened. Type ab point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0015″ and 0050″ thick and resin impregnated plywood.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.