Best and Coolest 18 Lmt Onsruds in 2020

 

LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 35000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 37-31 Solid Carbide Engraving Tool Uncoated Bright Finish 1 Flute 0060 Tip Diameter 30 Degree 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 37-31 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.060″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 37-31 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.060″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Engraving tool, carbide, size 0. 060 in, 30 degree angle, shank dia 1/4 in, overall length 2 in, for wood, plastic, aluminum and solid surfaces.

 

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 35000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Designed for perfect balance and ultra smooth finish over a wide speed range. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Three flute, 10 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 40000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Double flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 67-807 Solid Carbide 8 Facet Drill Bit Uncoated Bright Finish Round Shank Eight Facet Point 18 Size Pack of 1 #ad

LMT Onsrud 67-807 Solid Carbide 8 Facet Drill Bit, Uncoated (Bright) Finish, Round Shank, Eight Facet Point, 1/8″ Size (Pack of 1)

LMT Onsrud 67-807 Solid Carbide 8 Facet Drill Bit, Uncoated (Bright) Finish, Round Shank, Eight Facet Point, 1/8″ Size (Pack of 1) #ad - Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (hss). Round shank accommodates most drill chucks. Uncoated (bright) finish has no additional surface treatment or coating. Jobber length drill bit has a midrange drilling depth for general-purpose applications. 8-facet point with four cutting edges prevents delamination when drilling difficult-to-machine composite materials.

 

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Double flute, 30 degree angle.

 

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Designed for perfect balance and ultra smooth finish over a wide speed range. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Three flute, 10 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 37-25 Solid Carbide Engraving Tool Uncoated Bright Finish 1 Flute 0020 Tip Diameter 30 Degree 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020″ Tip Diameter, 30 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Engraving tool, carbide, size 0. 020 in, 30 degree angle, shank dia 1/4 in, overall length 2 in, for wood, plastic, aluminum and solid surfaces.

 

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 57-360 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 57-360 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 57-360 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Double flute, 30 degree angle.

 

LMT Onsrud 37-03 Solid Carbide Engraving Tool Uncoated Bright Finish 1 Flute 0010 Tip Diameter 60 Degree 14 Shank Diameter 2 Overall Length Pack of 1 #ad

LMT Onsrud 37-03 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010″ Tip Diameter, 60 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 37-03 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010″ Tip Diameter, 60 Degree, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shanks allow use with a wide variety of toolholding systems. Single flute, 60 degree angle.

 

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 45000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Designed for perfect balance and ultra smooth finish over a wide speed range. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Three flute, 10 degree angle.

 

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle.

 

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 63-618  Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 30000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter #ad

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.