Best and Coolest 17 Toolholders

 

Huot Angled Platform for 40 Taper Toolholders #ad

Huot Angled Platform for 40 Taper Toolholders

Huot Angled Platform for 40 Taper Toolholders #ad - The platform is 11 x 27 × 20. The company, founded in 1926 and headquartered in st. It is angled for visibility and convenient access to stored tools. Huot manufactures cutting tool storage systems. Paul, mn, meets international organization for standardization (iso) standard 9001. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. 25 inches (h x w x d). )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. (h is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. Toolholders are not included. The huot angled platform for 40 taper toolholders holds 24 cnc 40 taper toolholders and is made in usa.

 

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning Facing and Boring Toolholder for SDN40CA Super Quick Change Tool Post 1 - 1-14 Tool Capacity 4-12 Width 1-34 Height #ad

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN40CA Super Quick Change Tool Post, 1″ – 1-1/4″ Tool Capacity, 4-1/2″ Width, 1-3/4″ Height

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN40CA Super Quick Change Tool Post, 1″ – 1-1/4″ Tool Capacity, 4-1/2″ Width, 1-3/4″ Height #ad - The “v” groove makes this holder more versatile so that it can hold either square shank toolholders or boring bars. Fits industry standard toolposts. Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring. . Applicable for holds square shank tools, holds boring bars, turning and facing, light to medium boring, threading and grooving, cut-off applications.

 

Huot CNC SuperTower for 50 Taper Toolholders #ad

Huot CNC SuperTower for 50 Taper Toolholders

Huot CNC SuperTower for 50 Taper Toolholders #ad - The shelves are angled for convenient access. The supertower has mounting holes for bolting to the floor. 5 inches (h x w x d). 5 x 33. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. 75 × 17. The tower is 33. Paul, mn, meets international organization for standardization (iso) standard 9001. Huot manufactures cutting tool storage systems. The tower is made of 12-gauge steel with a phosphate undercoating and gold powder coating for durability. The unit can be stacked with other huot supertowers and an optional fourth shelf is sold separately. The company, founded in 1926 and headquartered in st. The huot cnc supertower for 50 taper toolholders has three shelves with 26 compartments on each shelf to hold a total of 78 cnc 50 taper toolholders and is made in usa.

 

TTC Cut-Off Toolholder - MODEL 021 FOR LATHES APPROXIMATE SWING  11 to 14 Straight Shank #ad

TTC Cut-Off Toolholder – MODEL: 021 FOR LATHES APPROXIMATE SWING : 11″ to 14″ Straight Shank

TTC Cut-Off Toolholder – MODEL: 021 FOR LATHES APPROXIMATE SWING : 11″ to 14″ Straight Shank #ad - Blade size 1/8 x 3/4″. Drop forged from special steel. Holder dimensions 1/2″ x 1-1/8″ x 5-7/8″. Machined to precise tolerances and carefully heat treated.

 

Kyocera A25R-DCLNL12-32 Steel Boring Bar 12598in Minimum Bore Diameter 7874in OAL A-DCLN Toolholder Style Left Hand ClampScrew Holding 5 Degrees Lead Angle #ad

Kyocera A25R-DCLNL12-32 Steel Boring Bar 1.2598in Minimum Bore Diameter 7.874in OAL A-DCLN Toolholder Style Left Hand Clamp/Screw Holding 5 Degrees Lead Angle

Kyocera A25R-DCLNL12-32 Steel Boring Bar 1.2598in Minimum Bore Diameter 7.874in OAL A-DCLN Toolholder Style Left Hand Clamp/Screw Holding 5 Degrees Lead Angle #ad - This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Lead angle 5 degrees, rake angle -6 (axial), -11 (radial), multi-use application internal facing. A25r-dclnl12-32 steel boring bar, 12598in minimum bore diameter, 7874in overall length. A-dcln toolholder style, 16535in maximum bore depth, 09843in shank, left hand. Through coolant yes, insert holding method clamp/screw, rake negative (axial), negative (radial).

 

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post 34 - 1 Tool Capacity 3-34 Width 1-12 Height #ad

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height

Dorian Tool D2 Chromium Molybdenum Alloy Steel Quick Change Turning, Facing and Boring Toolholder for SDN35CXA Super Quick Change Tool Post, 3/4″ – 1″ Tool Capacity, 3-3/4″ Width, 1-1/2″ Height #ad - The “v” groove makes this holder more versatile so that it can hold either square shank toolholders or boring bars. Holds the tool close to the tool post to maximize rigidity when turning, facing, threading or boring. Applicable for holds square shank tools, holds boring bars, turning and facing, light to medium boring, threading and grooving, cut-off applications. Fits industry standard toolposts.

 

Talon Pegboard Curved Hook Toolholder - 6 Pack #ad

Talon Pegboard Curved Hook Toolholder – 6 Pack

Talon Pegboard Curved Hook Toolholder – 6 Pack #ad - Usa. You have picked your last pegboard hook off the floor made of unbreakable nylon, talon hooks are the “never fall” pegboard hooks. Come in a wide variety of shapes & styles (straight, curved, elbow, screwdriver, pliers) available to fit your needs. They have ingenious dual anchor and screw set in the back. Sold in packs of 6. Fit all standard 1/4″ pegboard. Pull tools on and off them all day, or all year long, and they will never come loose hooks are removeable so the can be re-used or re-arranged anytime. Just push the screw in with your thumb and the hook holds rock solid.

 

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder #ad

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder

BQLZR Silver Precision 40CR Metal MTA3 ER25 Morse Taper Flat Tail Shank Collet Chuck Toolholder #ad - Mta is suitable for installing flat bits at the end of morse. The nuts can be tighten directly, high rigidity, strong clamping. Precision grinding milling chucks in vitro to eliminate unbalance, increased stability of cutting. Reduces the using of long cutter, reduce costs, improve efficiency.

 

Kyocera S08M-SVJBR2 Steel Boring Bar 062in Minimum Bore Diameter 6in OAL SSVJB Toolholder Style Right Hand Screw Holding 52 Degrees Lead Angle #ad

Kyocera S08M-SVJBR2 Steel Boring Bar 0.62in Minimum Bore Diameter 6in OAL S…SVJB Toolholder Style Right Hand Screw Holding 52 Degrees Lead Angle

Kyocera S08M-SVJBR2 Steel Boring Bar 0.62in Minimum Bore Diameter 6in OAL S…SVJB Toolholder Style Right Hand Screw Holding 52 Degrees Lead Angle #ad - Through coolant no, insert holding method screw, rake neutral (axial). Ssvjb toolholder style, 12500in maximum bore depth, 05000in shank, right hand. This is an authentic kyocera product, and this listing is brand registered please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Lead angle 52 degrees, rake angle 0 (axial), multi-use application facing, internal spherical machining. S08m-svjbr2 steel boring bar, 062in minimum bore diameter, 6in overall length.

 

Huot Angled Platform for Coromant Capto C5 Toolholders #ad

Huot Angled Platform for Coromant Capto C5 Toolholders

Huot Angled Platform for Coromant Capto C5 Toolholders #ad - (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. )cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. It is angled for visibility and convenient access to stored tools. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. The huot angled platform for coromant capto c5 toolholders holds 24 cnc capto c5 toolholders and is made in usa. Paul, mn, meets international organization for standardization (iso) standard 9001. Huot manufactures cutting tool storage systems. 25 inches (h x w x d). Toolholders are not included. The company, founded in 1926 and headquartered in st. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. The platform is 11 x 27 × 20.

 

New Collet Chucks Precision Er11 Extension Rod Toolholder CNC Mill #ad

New Collet Chucks Precision Er11 Extension Rod Toolholder CNC Mill

New Collet Chucks Precision Er11 Extension Rod Toolholder CNC Mill #ad - Diameter16mm,overall length 35mm,including the length of the threaded portion. Chuck hole er11 standard taper holes correct installation can be achieved using precisionultimate. Material special quality steel,high hardness. Note for the accuracy of concentricity of the sleeve itself, to reach the inner 001-0015mmbut th. Shaft hole diamter8mm,tolerance -002mm (actual 798mm)it requires heating when installating.

 

PHASE II 7 Universal Parting Blade Holder - Model 250-207 SERIES 2 OVERALL HEIGHT OF TOOLHOLDER 1-34 Maximum Tool Bit Size 1116 Height Bottom Of Holder To Top Of Blade 1 Blade Width 316 #ad

PHASE II #7 Universal Parting Blade Holder – Model: 250-207 SERIES: #2 OVERALL HEIGHT OF TOOLHOLDER: 1-3/4″ Maximum Tool Bit Size: 11/16″ Height Bottom Of Holder To Top Of Blade: 1″ Blade Width: 3/16″

PHASE II #7 Universal Parting Blade Holder – Model: 250-207 SERIES: #2 OVERALL HEIGHT OF TOOLHOLDER: 1-3/4″ Maximum Tool Bit Size: 11/16″ Height Bottom Of Holder To Top Of Blade: 1″ Blade Width: 3/16″ #ad - Increases productivity of all lathe operations. Completely sealed for maintenance-free operation. All working parts hardened and ground. Maximum rigidity for chatter-free performance. Change tools in seconds no time wasted with shims.

 

Huot ToolScoot Cart for Capto Style C6 Toolholders #ad

Huot ToolScoot Cart for Capto Style C6 Toolholders

Huot ToolScoot Cart for Capto Style C6 Toolholders #ad - Made of steel with an epoxy finish for durability and protection. Two-shelf storage cart with compartments holds 48 capto style c6 toolholders. Lower shelf is angled for access to tools from either side. Made in usa. Interlocking solid side panels and 5″ casters load rated at 1,000 lb for stability and strength.

 

NMTB40 - ER32 - 400 Precision Toolholder #ad

NMTB40 – ER32 – 4.00 Precision Toolholder

NMTB40 – ER32 – 4.00 Precision Toolholder #ad - Collet chuck nmtb-er spacification finish black oxide runout. 0002in tir works on all nmtb30 nmtb40 machines all critical tool holder surfaces precision ground made from alloy structural steel hardened to 48, 52rc 8000 rpms collet nut is included coolant thru capability for nmtb30 rear thread for pull stud is 1/2″-13 for nmtb40 rear thread for pull stud is 5/8-11. 005mm/.

 

Huot Angled Platform for 50 Taper Toolholders #ad

Huot Angled Platform for 50 Taper Toolholders

Huot Angled Platform for 50 Taper Toolholders #ad - Huot manufactures cutting tool storage systems. The huot angled platform for 50 taper toolholders holds 18 cnc 50 taper toolholders and is made in usa. The platform is made of steel with an epoxy finish for durability and protection and has nylon inserts that help protect the tools. The company, founded in 1926 and headquartered in st. (H is height, the vertical distance from lowest to highest point w is width, the horizontal distance from left to right d is depth, the horizontal distance from front to back. )Cutting tool organizers provide storage, organization, and quick size identification for drill bits, taps, and reamers. Toolholders are not included. Organizer types include gauges, indexes (also called cases), dispenser cabinets, carts, towers, racks, and platforms. It is angled for visibility and convenient access to stored tools. Paul, mn, meets international organization for standardization (iso) standard 9001. 25 inches (h x w x d). The platform is 11 x 27 × 20.

 

ALORIS 1 Turning Facing Holder - Model  CA1 SERIES 1 Style Turning Facing Holder OVERALL HEIGHT OF TOOLHOLDER 2-12 #ad

ALORIS #1 Turning & Facing Holder – Model .: CA1 SERIES: #1 Style: Turning & Facing Holder OVERALL HEIGHT OF TOOLHOLDER: 2-1/2″

ALORIS #1 Turning & Facing Holder – Model .: CA1 SERIES: #1 Style: Turning & Facing Holder OVERALL HEIGHT OF TOOLHOLDER: 2-1/2″ #ad - Turning and facing tools can be locked in together. Takes various sizes of bits.

 

Nikcole SET 5 Mini-Groove Kit 12 Shank toolholder plus 5 coated carbide grooving inserts 035-073 #ad

Nikcole SET 5 Mini-Groove Kit, 1/2″ Shank toolholder plus 5 coated carbide grooving inserts .035-.073″

Nikcole SET 5 Mini-Groove Kit, 1/2″ Shank toolholder plus 5 coated carbide grooving inserts .035-.073″ #ad - Nikcole mini-groove kit contains 1/2″ square shank right hand tool holder, 5 carbide tin coated sg style grooving inserts, key, and extra screw. 063″, and. 2 cutting edges on each insert. The nikcole mini-system is designed for cut-off and grooving under. Made in usa. 078″. (Lh holders are required for lh inserts) other inserts can be used for threading, turning, and full-radius grooving. 073″. 051″,. 043″,. 035″,. Interchangeable with all nickole mini-groove rh holders and inserts. Widths of inserts are.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.