Best and Coolest 17 Threading Taps in 2019

 

Dormer E201 Cobalt Steel Machine Straight Flute Threading Tap Nitride Finish Round with Square End Shank Modified Bottoming Chamfer M8-125mm Thread Size 80mm Shank Diameter Pack of 1

Dormer E201 Cobalt Steel Machine Straight Flute Threading Tap, Nitride Finish, Round with Square End Shank, Modified Bottoming Chamfer, M8-1.25mm Thread Size, 8.0mm Shank Diameter (Pack of 1)

Dormer E201 Cobalt Steel Machine Straight Flute Threading Tap, Nitride Finish, Round with Square End Shank, Modified Bottoming Chamfer, M8-1.25mm Thread Size, 8.0mm Shank Diameter (Pack of 1) - Hand threading tap with straight flutes cuts threads in through holes and blind holes. Produces right-hand threads in metric sizes. Round shank with square end allows tap to be used in hand or power-driven applications. Cobalt steel resists abrasion and high temperatures, with higher feed rates compared to high-speed steel. Nitride finish provides hardness for wear resistance and is suitable for abrasive materials such as cast iron.

 

Drillco 2800E Series High-Speed Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer M11 x 150 Size

Drillco 2800E Series High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, M11 x 1.50 Size

Drillco 2800E Series High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, M11 x 1.50 Size - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Kodiak Cutting Tools KCT202805 USA Made 14-28 Hand Threading Tap Bottom Style Ground Threads High Speed Steel H2 Limit 4 Flute

Kodiak Cutting Tools KCT202805 USA Made 1/4-28 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 4 Flute

Kodiak Cutting Tools KCT202805 USA Made 1/4-28 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 4 Flute - 255″ shank 1 thread length 2-1/2″ overall length 4 flute standard hand threading tap. 1/4-28 hand threading tap. .

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer 4-40 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 4-40 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 4-40 UNC - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Made of carbon steel. Comes with round with square end shank.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Bottoming Chamfer M5 x 080 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5 x 0.80 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5 x 0.80 Size - Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Made of carbon steel. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap Uncoated Bright Finish Round with Square End Shank Taper Chamfer M18 x 15 Size Pack of 1

Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Taper Chamfer, M18 x 1.5 Size (Pack of 1)

Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Taper Chamfer, M18 x 1.5 Size (Pack of 1) - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shank with square end.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Plug Chamfer 1-14-12 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 1-1/4″-12 UNF

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, 1-1/4″-12 UNF - Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Comes with round with square end shank. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

 

Drillco 2800 Series High-Speed Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer M16 x 2 Size

Drillco 2800 Series High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, M16 x 2 Size

Drillco 2800 Series High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, M16 x 2 Size - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.

 

Kodiak Cutting Tools KCT200352 USA Made 4-48 Hand Threading Tap Bottom Style Ground Threads High Speed Steel H2 Limit 3 Flute

Kodiak Cutting Tools KCT200352 USA Made 4-48 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 3 Flute

Kodiak Cutting Tools KCT200352 USA Made 4-48 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 3 Flute - 4-48 hand threading tap. . 141″ shank 9/16 thread length 1-7/8″ overall length 3 flute standard hand threading tap.

 

Kodiak Cutting Tools KCT203498 USA Made 38-16 Hand Threading Tap Bottom Style Ground Threads High Speed Steel H2 Limit 4 Flute

Kodiak Cutting Tools KCT203498 USA Made 3/8-16 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 4 Flute

Kodiak Cutting Tools KCT203498 USA Made 3/8-16 Hand Threading Tap, Bottom Style, Ground Threads, High Speed Steel, H2 Limit, 4 Flute - 3/8-16 hand threading tap. 381″ shank 1-1/4 thread length 2-15/16″ overall length 4 flute standard hand threading tap.

 

Tonsiki Adjustable M3-M8 3mm-8mm HSS T-Handle Reversible Ratchet Wrench Tapping Threading Tool with Sliver Hand Screw Tap

Tonsiki Adjustable M3-M8 3mm-8mm HSS T-Handle Reversible Ratchet Wrench Tapping Threading Tool with Sliver Hand Screw Tap

Tonsiki Adjustable M3-M8 3mm-8mm HSS T-Handle Reversible Ratchet Wrench Tapping Threading Tool with Sliver Hand Screw Tap - 3-8mm 7/64, 5/16″ t-handle ratchet tap wrench machinist tool reversion. Small size t-handle tap wrench-chuck type m3-m8. Easy to operation even in narrow space. Length of wrench 85mm / 335in. Usage for taps m3-m8 features t-handle ratcheting tap wrenches three position gear box for quick, efficient ratcheting action designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.

 

Kodiak Cutting Tools KCT203839 USA Made 38-24 Bottom Threading Tap Steam Oxide Ground Threads High Speed Steel H3 Limit 4 Flute

Kodiak Cutting Tools KCT203839 USA Made 3/8-24 Bottom Threading Tap, Steam Oxide, Ground Threads, High Speed Steel, H3 Limit, 4 Flute

Kodiak Cutting Tools KCT203839 USA Made 3/8-24 Bottom Threading Tap, Steam Oxide, Ground Threads, High Speed Steel, H3 Limit, 4 Flute - 381″ shank 1-1/4 thread length 2-15/16″ overall length 4 flute steam oxide threading tap. 3/8-24 tap, steam oxide.

 

Kodiak Cutting Tools KCT202717 USA Made 14-20 Hand Threading Tap Set Includes Taper Plug and Bottom Taps Ground Threads High Speed Steel H3 Limit 4 Flute 14 Diameter x 20 TPI Pack of 3

Kodiak Cutting Tools KCT202717 USA Made 1/4-20 Hand Threading Tap Set, Includes Taper, Plug and Bottom Taps, Ground Threads, High Speed Steel, H3 Limit, 4 Flute, 1/4″ Diameter x 20 TPI (Pack of 3)

Kodiak Cutting Tools KCT202717 USA Made 1/4-20 Hand Threading Tap Set, Includes Taper, Plug and Bottom Taps, Ground Threads, High Speed Steel, H3 Limit, 4 Flute, 1/4″ Diameter x 20 TPI (Pack of 3) - 1/4-20 hand threading tap. 255″ shank 1 thread length 2-1/2″ overall length 4 flute standard hand threading tap.

 

Kodiak Cutting Tools KCT199857 USA Made 2-56 Bottom Threading Tap Steam Oxide Ground Threads High Speed Steel H2 Limit 3 Flute

Kodiak Cutting Tools KCT199857 USA Made 2-56 Bottom Threading Tap, Steam Oxide, Ground Threads, High Speed Steel, H2 Limit, 3 Flute

Kodiak Cutting Tools KCT199857 USA Made 2-56 Bottom Threading Tap, Steam Oxide, Ground Threads, High Speed Steel, H2 Limit, 3 Flute - 2-56 tap, steam oxide. . 141″ shank 7/16 thread length 1-3/4″ overall length 3 flute steam oxide threading tap.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Bottoming Chamfer M10 x 125 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M10 x 1.25 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M10 x 1.25 Size - Made of carbon steel. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Plug Chamfer M4 x 070 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, M4 x 0.70 Size

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, M4 x 0.70 Size - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Comes with round with square end shank. Made of carbon steel.

 

Drillco 2000C Series Carbon Steel Hand Threading Tap Uncoated Bright Finish Round Shank with Square End Taper Chamfer 2-56 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 2-56 UNC

Drillco 2000C Series Carbon Steel Hand Threading Tap, Uncoated (Bright) Finish, Round Shank with Square End, Taper Chamfer, 2-56 UNC - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Made of carbon steel. Comes with round with square end shank. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.