Best and Coolest 16 Jam Nuts in 2020

 

Type 18-8 Stainless Steel ThinJam Nuts - Marine Bolt Supply 12-20 pack of 25 #ad

Type 18-8 Stainless Steel Thin/Jam Nuts – Marine Bolt Supply (1/2-20 (pack of 25))

Type 18-8 Stainless Steel Thin/Jam Nuts – Marine Bolt Supply (1/2-20 (pack of 25)) #ad - These 1/2-20 stainless jam nuts are available in convenient packs of 25. 1/2-20 is considered fine thread because there are 20 threads per inch (tpi). Dimensions are as follows width (flat to flat) is 3/4″ & thickness is 5/16″. It has a high resistance to rust and corrosion and may be mildly magnetic. Type 18-8 stainless steel is most common. Jam nuts are typically half as thick as standard nuts and are useful in tight space applications.

 

Hard-to-Find Fastener 014973259372 Coarse Hex Jam Nuts 58-11 Piece-5 #ad

Hard-to-Find Fastener 014973259372 Coarse Hex Jam Nuts, 5/8-11, Piece-5

Hard-to-Find Fastener 014973259372 Coarse Hex Jam Nuts, 5/8-11, Piece-5 #ad - Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We also sell coated and stainless products for additional rust resistance.

 

Dicor V160SDJNT 1316 Single Jam Nut #ad

Dicor V160SDJNT 13/16″ Single Jam Nut

Dicor V160SDJNT 13/16″ Single Jam Nut #ad - Thickness 11/64. Drive size 11/32. V160sd-jnt. Series nte. Finish zinc.

 

QSC 12-20 Steel Right Hand Jam Nut Clear Zinc Plated 6-Pack #ad

QSC 1/2-20 Steel Right Hand Jam Nut, Clear Zinc Plated (6-Pack)

QSC 1/2-20 Steel Right Hand Jam Nut, Clear Zinc Plated (6-Pack) #ad - Clear zinc plated. Width 3/4. Height 03125. Steel.

 

18-8 Stainless Steel Hex Jam Nut Plain Finish ASME B1822 38-16 Thread Size 916 Width Across Flats 732 Thick Pack of 100 #ad

18-8 Stainless Steel Hex Jam Nut, Plain Finish, ASME B18.2.2, 3/8″-16 Thread Size, 9/16″ Width Across Flats, 7/32″ Thick (Pack of 100)

18-8 Stainless Steel Hex Jam Nut, Plain Finish, ASME B18.2.2, 3/8″-16 Thread Size, 9/16″ Width Across Flats, 7/32″ Thick (Pack of 100) #ad - 18-8 stainless steel provides good corrosion resistance and strength. Hex jam nut is thinner than standard hex nuts for tight areas and often used with another jam nut to help prevent loosening. Meets asme b1822 specifications. Plain surface has no finish or coating.

 

QSC 516-24 Steel Right Hand Jam Nut Clear Zinc Plated 6-Pack #ad

QSC 5/16-24 Steel Right Hand Jam Nut, Clear Zinc Plated (6-Pack)

QSC 5/16-24 Steel Right Hand Jam Nut, Clear Zinc Plated (6-Pack) #ad - Clear zinc plated. Steel. Height 01875. Width 1/2.

 

Dicor V19582EJN Enclosed Jam Nut #ad

Dicor V19582EJN Enclosed Jam Nut

Dicor V19582EJN Enclosed Jam Nut #ad - V19582-ejn. Plain surface has no finish or coating. Hex jam nut is thinner than standard hex nuts for tight areas and often used with another jam nut to help prevent loosening. Meets asme b1822 specifications.

 

916-18 Finish Pattern Hex Jam Nuts 18-8 Stainless Steel Package Qty 25 #ad

9/16-18 Finish Pattern Hex Jam Nuts 18-8 Stainless Steel Package Qty 25

9/16-18 Finish Pattern Hex Jam Nuts 18-8 Stainless Steel Package Qty 25 #ad - Finish pattern hex jam nut. Jam nuts are used as a second nut threaded over a bolt to prevent the first from loosening. Fine thread. 18-8 stainless steel.

 

QSC 58-18 Steel Left Hand Jam Nut Gold Zinc Plated 6-Pack #ad

QSC 5/8-18 Steel Left Hand Jam Nut, Gold Zinc Plated (6-Pack)

QSC 5/8-18 Steel Left Hand Jam Nut, Gold Zinc Plated (6-Pack) #ad - Width 15/16. Height 0375. Gold zinc plated. Steel.

 

Steel Hex Jam Nut Plain Finish Grade 2 ASME B1822 516-24 Thread Size 12 Width Across Flats 316 Thick Pack of 100 #ad

Steel Hex Jam Nut, Plain Finish, Grade 2, ASME B18.2.2, 5/16″-24 Thread Size, 1/2″ Width Across Flats, 3/16″ Thick (Pack of 100)

Steel Hex Jam Nut, Plain Finish, Grade 2, ASME B18.2.2, 5/16″-24 Thread Size, 1/2″ Width Across Flats, 3/16″ Thick (Pack of 100) #ad - Meets asme b1822 specifications. Plain surface has no finish or coating. Grade 2 steel is often used in applications where toughness is the primary consideration. Hex jam nut is thinner than standard hex nuts for tight areas and often used with another jam nut to help prevent loosening.

 

316 Stainless Steel Hex Jam Nut Plain Finish DIN 439B Metric M4-07 Thread Size 7 mm Width Across Flats 22 mm Thick Pack of 100 #ad

316 Stainless Steel Hex Jam Nut, Plain Finish, DIN 439B, Metric, M4-0.7 Thread Size, 7 mm Width Across Flats, 2.2 mm Thick (Pack of 100)

316 Stainless Steel Hex Jam Nut, Plain Finish, DIN 439B, Metric, M4-0.7 Thread Size, 7 mm Width Across Flats, 2.2 mm Thick (Pack of 100) #ad - Plain surface has no finish or coating. Hex jam nut is thinner than standard hex nuts for tight areas and often used with another jam nut to help prevent loosening. 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel. Meets din 439b specifications.

 

Hex Jam Nuts A2 Stainless Steel - 12M x 175 19M Flats x 57M Thick Qty-25 #ad

Hex Jam Nuts A2 Stainless Steel – 12M x 1.75 (19M Flats x 5.7M Thick) Qty-25

Hex Jam Nuts A2 Stainless Steel – 12M x 1.75 (19M Flats x 5.7M Thick) Qty-25 #ad - Metric jam nut is a thinner low profile nut about half the size of a standard finish nut and is used as a locknut where it is jammed against a finish nut to lock the two nuts in place. Secure a material to a fastener without securing to it. Two nuts can be locked together free style, jam nuts are also used where lower profile nuts are required in tight areas. For a jam nut to stay in place, both nuts must be torqued equally. A2 stainless steel is suitable for exterior and harsh environments.

 

Prime-Line 9075845 Hex Jam Nuts 14 in-20 A563 Grade A Zinc Plated Steel 50-Pack #ad

Prime-Line 9075845 Hex Jam Nuts, 1/4 in.-20, A563 Grade A Zinc Plated Steel, 50-Pack

Prime-Line 9075845 Hex Jam Nuts, 1/4 in.-20, A563 Grade A Zinc Plated Steel, 50-Pack #ad - Can also be used in place of a standard finished hex nut in cases where a standard nut will not fit. Used as a second nut to “jam” or prevent the main nut from loosening. Similar in shape and function to a standard finished hex nut but is about half as thick. Size 1/4 inch-20. If using one thin nut and one standard nut, the thinner nut goes in first.

 

1000 14-20 Hex Jam Nuts - Thin Nut - Zinc Plated - Coarse #ad

(1000) 1/4-20 Hex Jam Nuts – Thin Nut – Zinc Plated – Coarse

(1000) 1/4-20 Hex Jam Nuts – Thin Nut – Zinc Plated – Coarse #ad - Lot of (1000) hex jam nuts. These zinc plated thin nuts are 1/4-20 thread with a 7/16″ hex and measure 5/32″ thick.

 

US-Deals 12-28 Black Steel Muzzle Device Jam Nut 223556 2PCS Pack #ad

US-Deals 1/2-28 Black Steel Muzzle Device Jam Nut 223/5.56 2PCS Pack

US-Deals 1/2-28 Black Steel Muzzle Device Jam Nut 223/5.56 2PCS Pack #ad - Magnesium phosphate coating. Replace crush washer for accurate and fine alignment of mb. One free aluminum opener (randomly selected color, one opener per order). 3/4 wrench opening. Fully re-useable not like crush washer.

 

Dicor V195F9-EJN-MF Jam Nut with Cover - 27 mm Chrome Quantity 4 #ad

Dicor V195F9-EJN-MF Jam Nut with Cover – 27 mm, Chrome (Quantity 4)

Dicor V195F9-EJN-MF Jam Nut with Cover – 27 mm, Chrome (Quantity 4) #ad - Steel. Height 02188. Width 9/16. Gold zinc plated.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.