Best 25 Magnetic Tool Holders

 

Lodesol Flexible Magnetic Tool Holder 1875x525 MPS3620

Lodesol Flexible Magnetic Tool Holder 18.75″x5.25″ MPS3620

Lodesol Flexible Magnetic Tool Holder 18.75″x5.25″ MPS3620 - Lodesol flexible magnetic tool holders have a durable vinyl outer shell offering resistance to gasoline, oil, brake fluid, and other common chemicals used in all trades from automotive and marine mechanics to machinists and wood workers. Folds in half to a measurement of 9. Stop losing small screws, springs, washers and other small hardware while repairing or servicing power tools, electronics, lawnmowers and more. 5″x5. Save time and effort by keeping your tools and hardware secure, organized, and close by rather than fishing them out from the engine bay or searching for them on the floor. 25″ with a handle allowing you to carry your tools or to hang the tool holder near your workplace. 75″x5. Place one in your tool box and stop spending time looking for the right tool, your sockets, pliers, and wrenches will stay where you put them. High abrasion resistance and anti-microbial, these magnetic holders will last a lifetime through the toughest environments and use. The patented flexible magnetic membrane provides a superior strength hold over the entire pad and conforms to the surface on which it is placed. The mps3620 magnetic tool holder provides a secure spot to place your tools and hardware. 25″ while extended, it provides a long surface with ample space to hold tools and hardware securely. Measuring 18. If you normally have some nuts and bolts left over or can’t find all your tools after your project, this may be your solution. Perfect for mechanics to keep nuts, bolts, and tools in place and organized while on the job.

 

18 in Magnetic Tool Holder

18 in Magnetic Tool Holder

18 in Magnetic Tool Holder - The magnetic tool holder measures 2″ wide x 18″ long. With hardly a sideways glance, you can drop one tool onto it, and grab the next. Whether squaring up mortises with a chisel or dismantling a clock with a screwdriver, it’s always nice to be able to switch tools quickly without breaking your concentration. Features tool holder mounts to most surfaces with screws has two magnetic bars for improved stability for use with flat faced tools, not intended for heavy tools with a round profile. It is not intended for heavy tools with a round profile, such as for turning gouges. Unlike many other magnetic holders, this one has two magnetic bars to provide stability with flat-faced tools and a little extra grab. That’s where the magnetic tool holder comes in handy.

 

Hiltex 53412 Shop Magnetic Tool Bar Holder 18

Hiltex 53412 Shop Magnetic Tool Bar Holder, 18″

Hiltex 53412 Shop Magnetic Tool Bar Holder, 18″ - 30lb capacity. Powder coating. 1 inch wide holder. Heavy-duty, permanent magnet assembly holds large or small tools and metal parts securely in place. 18″ magnetic bar holder.

 

Master Magnetics AMC13PLC Magnetic Tool Holder 13 Wide 20 lb per inch Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC13PLC Magnetic Tool Holder, 13″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC13PLC Magnetic Tool Holder, 13″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe - Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. 13″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Heavy-duty, steel with all-welded construction, ceramic magnets, silver nickel plate finish and red tape. Holds up to 20 pounds per inch determined by the iron content of the tool or part.

 

Olsa Tools  Hex Bit Holder With Magnetic Base  Premium Quality Tool Organizer BLUE

Olsa Tools | Hex Bit Holder With Magnetic Base | Premium Quality Tool Organizer (BLUE)

Olsa Tools | Hex Bit Holder With Magnetic Base | Premium Quality Tool Organizer (BLUE) - Strong magnetic base, 37 hole, 1/4 inch hex bit organizer. Magnet holds your bits in place & holds organizer on to your tool box. Bits are not included | magnetic bit tray only. Quickly find the hex or torx bit you need | keeps your bits in one place. High quality, durable tool tray made of solid material.

 

OEMTOOLS 24921 24 Inch Magnetic Tool Holder by OEMTOOLS

OEMTOOLS 24921 24 Inch Magnetic Tool Holder by OEMTOOLS

OEMTOOLS 24921 24 Inch Magnetic Tool Holder by OEMTOOLS - 24 magentic tool barpre-drilled holes for mountingdesigned for professional auto mechanics and heavy duty applicationsblack finishchamfered ends make fastener engagement quick and smoothmount to wall or tool box for extra storage spaceorganizes and holds all metal objects securely in placepredrilled holes for mounting.

 

RamPro 12-Inch Magnetic Tool Holder Racks with Mounting Screws 4-Pieces

RamPro 12-Inch Magnetic Tool Holder Racks with Mounting Screws (4-Pieces)

RamPro 12-Inch Magnetic Tool Holder Racks with Mounting Screws (4-Pieces) - âœ“ Use for sturdy grabs the heaviest iron at your home, basement, office, workshop, studio, shed, on garage walls, kitchen counters, sewing tables, slat boards, steel carts or in any harsh environments, useful for mounting or carrying around screwdrivers, hammers, wrenches, spanners, extensions, ratchets, pliers, sockets, saw blades, fasteners, knives, scissors, screws, scotch tape, ammo magazines or any other kind of ferrous metal objects and hand yard tools. ✓ Specs 4 individual bars, 12″ length, 1″ width, ½” height, weighs 1 lb, holds tools weighing up to approx 5 lbs each • 8 mounting phillip screws 1-3/8″ length • mounting holes 3/16 inch. ✓ Easy installation simply install the racks either by flush-mounting, or first mounting the brackets with the incl screws onto your wall and then attaching the bars either connected aligned or separated, and then just put on your metallic stuff and watch how the magnetic force grabs it right out of your hand, indicating how strong it is. ✓ design & quality solid steel flat frame with black gloss finish and tough magnetic force catches on and holds strongly anything that is magnetic, designed to screw onto any wall or work table easily and to hang the most devices possible without falling off, strips can be connected one to another simply by extending it through the adjustable mounting hardware. ✓ The ram-pro extremely strong magnetic bar set creates the most efficient way to keep your often-used tools organized, visualized and handy at all times, whether in the home, garage, workshop, office or any other place that needs to get de-cluttered.

 

3 18 Magnetic Tool Holders Magnet Organizer Storage Great for Kitchen

3 18″ Magnetic Tool Holders Magnet Organizer Storage Great for Kitchen

3 18″ Magnetic Tool Holders Magnet Organizer Storage Great for Kitchen - Quantity 3. Powerful magnet holds tools, and miscellenous items firmly in place. Comes complete with hardware. Ready for quick installation. Quickly organize your tool shed, garage, or any storage area.

 

Goplus 6 PCS 18 Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers

Goplus® 6 PCS 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers

Goplus® 6 PCS 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers - Organize and save space with space at a premium in any kitchen, the magnetic tool bar saves you counter and drawer space, providing you a convenient and easy to access place for all your knives, scissors, and other metal utensils. Versatile and convenient even though it is primarily used for knives, you can use your magnetic tool bar to organize your screw drivers, wrenches, drill bits and other tools in your tool shed or workshop. Smart replacement for knife blocks old-fashioned knife blocks can hide mold and germs, and are difficult to clean and sanitize. .

 

Master Magnetics AMC5PLC Magnetic Tool Holder 6 Wide 20 lb per inch Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC5PLC Magnetic Tool Holder, 6″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC5PLC Magnetic Tool Holder, 6″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe - Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Heavy-duty, steel with all-welded construction, ceramic magnets, silver nickel plate finish and red tape. 6″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Holds up to 20 pounds per inch determined by the iron content of the tool or part.

 

Safstar 3pcs 8 12 18 Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench

Safstar 3pcs 8″ 12″ 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench

Safstar 3pcs 8″ 12″ 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench - Smart replacement for knife blocks old-fashioned knife blocks can hide mold and germs, and are difficult to clean and sanitize. Versatile and convenient even though it is primarily used for knives, you can use your magnetic tool bar to organize your screw drivers, wrenches, drill bits and other tools in your tool shed or workshop. . Organize and save space with space at a premium in any kitchen, the magnetic tool bar saves you counter and drawer space, providing you a convenient and easy to access place for all your knives, scissors, and other metal utensils.

 

Goplus 3 PCS 18 Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers

Goplus® 3 PCS 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers

Goplus® 3 PCS 18″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers - Smart replacement for knife blocks old-fashioned knife blocks can hide mold and germs, and are difficult to clean and sanitize. Organize and save space with space at a premium in any kitchen, the magnetic tool bar saves you counter and drawer space, providing you a convenient and easy to access place for all your knives, scissors, and other metal utensils. Versatile and convenient even though it is primarily used for knives, you can use your magnetic tool bar to organize your screw drivers, wrenches, drill bits and other tools in your tool shed or workshop. .

 

Mechanics Time Saver 5015 Neon Green Magnetic Tool Holder

Mechanics Time Saver 5015 Neon Green Magnetic Tool Holder

Mechanics Time Saver 5015 Neon Green Magnetic Tool Holder - Holding capacity can be influenced by the thickness and finish of attaching surface. Holds heavy tools up to 11-pound including (hammer, mallet, wrench, etc) as well as irregular shaped tools. Screw-hole design also allows for easy mounting to non-ferrous surfaces. 1/2″ drive 14-hole green.

 

Master Magnetics 07579 Magnetic Tool Holder with Screw Mount 12 Wide 30 lb per inch Flat Black

Master Magnetics 07579 Magnetic Tool Holder with Screw Mount, 12″ Wide, 30 lb per inch, Flat, Black

Master Magnetics 07579 Magnetic Tool Holder with Screw Mount, 12″ Wide, 30 lb per inch, Flat, Black - Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Holds up to 30 pounds per inch determined by the iron content of the tool, knife or iron part. Available in faux stainless steel or flat black colors with magnetic or screw mount. 12″ width, 15″ height, 10″ depth approximate overall dimensions screw mount by two pre-drilled holes screws are included. Magnet assembly made of hard plastic, steel strips and ceramic magnets.

 

Master Magnetics 07577 Magnetic Tool Holder with Magnetic Mount 12 Wide 30 lb per inch Flat Black

Master Magnetics 07577 Magnetic Tool Holder with Magnetic Mount, 12″ Wide, 30 lb per inch, Flat, Black

Master Magnetics 07577 Magnetic Tool Holder with Magnetic Mount, 12″ Wide, 30 lb per inch, Flat, Black - Holds on both sides one side designed to hold to flat steel surface and the other side designed to securely hold hammers, wrenches, screwdrivers, knives, and iron parts. Available in faux stainless steel or flat black colors with magnetic or screw mount. Magnet assembly made of hard plastic, steel strips and ceramic magnets. Holds up to 30 pounds per inch determined by the iron content of the tool, knife or iron part. 12″ width, 15″ height, 10″ depth approximate overall dimensions.

 

Lodesol Flexible Magnetic Tool Holder 825x675 Mp2012

Lodesol Flexible Magnetic Tool Holder 8.25″x6.75″ Mp2012

Lodesol Flexible Magnetic Tool Holder 8.25″x6.75″ Mp2012 - 75″. Lodesol flexible magnetic tool holders have a durable vinyl outer shell offering resistance to gasoline, oil, brake fluid, and other common chemicals used in all trades from automotive and marine mechanics to machinists and wood workers. 25″x6. Stop losing small screws, springs, washers and other small hardware while repairing or servicing power tools, electronics, lawnmowers and more. Overall product dimensions 8. High abrasion resistance and anti-microbial, these magnetic holders will last a lifetime through the toughest environments and use. Perfect for mechanics to keep nuts, bolts, and tools in place and organized while on the job. 8″x5. Save time and effort by keeping your tools and hardware secure, organized, and close by rather than fishing them out from the engine bay or searching for them on the floor. Magnetic surface dimensions 6. The mp2012 magnetic tool holder offers a secure place to put your nuts, bolts, and other small parts while you accomplish your projects. If you normally have some nuts and bolts left over or can’t find all your tools after your project, this may be your solution. The patented flexible magnetic membrane provides a superior strength hold over the entire pad and conforms to the surface on which it is placed. Keep one near your workplace to stop loosing those critical small screws and other hardware required to finish the job. 35″. Place one in your tool box and stop spending time looking for the right tool, your sockets, pliers, and wrenches will stay where you put them.

 

Lodesol Flexible Magnetic Tool Holder 125x95 Mp4835

Lodesol Flexible Magnetic Tool Holder 12.5″x9.5″ Mp4835

Lodesol Flexible Magnetic Tool Holder 12.5″x9.5″ Mp4835 - Multiple organizing possibilities for tools, office supplies, kitchen items, and more. Chemical, mold, mildew, abrasion resistant high quality vinyl ensures long lifetime of use. Wipes clean with a damp cloth for easy care. Made in usa. Patented magnetic membrane provides a flexible magnetic surface with superior holding strength.

 

Update International MTH-13P Magnetic Tool Holder with Mounting Screws Black 13-Inch set of 4

Update International MTH-13P Magnetic Tool Holder with Mounting Screws, Black, 13-Inch, set of 4

Update International MTH-13P Magnetic Tool Holder with Mounting Screws, Black, 13-Inch, set of 4 - Magnetic tool holder with mounting screws. Available in black color measures 13-inch in size. This wall-mounted tool holder features two magnetic strips to easily keep knives in place. It offers three hooks for non-magnetic items to be stored. It keeps knives away from the fray, but still ready to be used at a moments notice.

 

Goplus 24 Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers Workshop

Goplus® 24″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers Workshop

Goplus® 24″ Magnetic Tool Holder Bar Organizer Storage Rack Knife Wrench Pilers Workshop - Weight capacity about 28 lbs. Fully magnetic surface powered by a powerful neodymium magnet allows even your largest knives to instantly hang safely and securely. Material steel powder coating. Use it to hold knives, scissors, tools, children’s toys, keys, and whatever else you can think of as the ultimate organizer. Size 24″ x09″ x049″.

 

Proslat 11007 Magnetic Tool Holder Designed for Proslat PVC Slatwall 2-Pack

Proslat 11007 Magnetic Tool Holder Designed for Proslat PVC Slatwall, 2-Pack

Proslat 11007 Magnetic Tool Holder Designed for Proslat PVC Slatwall, 2-Pack - The heavy duty magnet will hold several tools designed to work with proslat pvc slat wall organization. Includes two magnetic tool holders. Hang your steel hand tools for easy access. Proslat’s heavy duty magnetic tool holder features steel construction and a black powder coated finish.

 

RamPro 2 24 Magnetic Tool Holder Bars Super Strong Heavy-Duty Metal Magnet Storage Tool Organizer Racks Set  For Screwdrivers Pliers Wrenches Knives Scissors More Mounting Screws Included

RamPro 2 24″ Magnetic Tool Holder Bars, Super Strong Heavy-Duty Metal Magnet Storage Tool Organizer Racks Set | For Screwdrivers, Pliers, Wrenches, Knives, Scissors & More (Mounting Screws Included)

RamPro 2 24″ Magnetic Tool Holder Bars, Super Strong Heavy-Duty Metal Magnet Storage Tool Organizer Racks Set | For Screwdrivers, Pliers, Wrenches, Knives, Scissors & More (Mounting Screws Included) - âœ“ Design & quality solid steel flat frame with black gloss finish and built in tough magnets catches on and holds firmly anything you attach to it, designed to be screwed into any wall or work table easily and to hang the most devices possible without falling off, stainless steel material makes it last a lifetime, rugged enough for shop use, attractive enough for kitchen. ✓ Easy installation simply install the racks by flush-mounting the bars with the incl screws onto your wall, screw anchors are included for more efficient drywall installation, mount the bars either lined up or separated, then just put on your metallic stuff and watch how the magnetic force grabs it right out of your hand, indicating how strong it is. ✓ Use for sturdy grabs the heaviest iron at your home, basement, office, workshop, studio, shed, on garage walls, kitchen counters, sewing tables, slat boards, steel carts or in any harsh environments, useful for mounting or carrying around screwdrivers, hammers, wrenches, spanners, extensions, ratchets, pliers, sockets, saw blades, fasteners, knives, scissors, screws, scotch tape, ammo magazines or any other kind of ferrous metal objects and hand yard tools. ✓ specs 2 individual bars, 24″ length, 1″ width, ½” height, weighs 193 lb, holds tools weighing up to approx 5 lbs each • 4 mounting phillip screws 1-3/16″ length • 4 screw anchors • mounting holes ¼” diameter. ✓ The ram-pro extremely strong magnetic bar set creates the most efficient way to keep your often-used tools organized, displayed and handy at all times, whether in the home, garage, workshop, office or any other place that needs to get de-cluttered.

 

ATD Tools 8763 Large Rectangular Magnetic Tool Holder

ATD Tools 8763 Large Rectangular Magnetic Tool Holder

ATD Tools 8763 Large Rectangular Magnetic Tool Holder - (14 x 16 x 1)-inch. ✓ Easy installation simply install the racks by flush-mounting the bars with the incl screws onto your wall, screw anchors are included for more efficient drywall installation, mount the bars either lined up or separated, then just put on your metallic stuff and watch how the magnetic force grabs it right out of your hand, indicating how strong it is. ✓ The ram-pro extremely strong magnetic bar set creates the most efficient way to keep your often-used tools organized, displayed and handy at all times, whether in the home, garage, workshop, office or any other place that needs to get de-cluttered. ✓ use for sturdy grabs the heaviest iron at your home, basement, office, workshop, studio, shed, on garage walls, kitchen counters, sewing tables, slat boards, steel carts or in any harsh environments, useful for mounting or carrying around screwdrivers, hammers, wrenches, spanners, extensions, ratchets, pliers, sockets, saw blades, fasteners, knives, scissors, screws, scotch tape, ammo magazines or any other kind of ferrous metal objects and hand yard tools. ✓ Design & quality solid steel flat frame with black gloss finish and built in tough magnets catches on and holds firmly anything you attach to it, designed to be screwed into any wall or work table easily and to hang the most devices possible without falling off, stainless steel material makes it last a lifetime, rugged enough for shop use, attractive enough for kitchen.

 

Master Magnetics AMC18PLC Magnetic Tool Holder 18 Wide 20 lb per inch Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC18PLC Magnetic Tool Holder, 18″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe

Master Magnetics AMC18PLC Magnetic Tool Holder, 18″ Wide, 20 lb per inch, Silver Nickel Plate Finish with Red Stripe - 18″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included. Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Heavy-duty, steel with all-welded construction, ceramic magnets, silver nickel plate finish and red tape. Holds up to 20 pounds per inch determined by the iron content of the tool or part.

 

Master Magnetics AM5PLC Magnetic Tool Holder 6 Wide 20 lb per inch Black Powder Coat with Yellow Stripe

Master Magnetics AM5PLC Magnetic Tool Holder, 6″ Wide, 20 lb per inch, Black Powder Coat with Yellow Stripe

Master Magnetics AM5PLC Magnetic Tool Holder, 6″ Wide, 20 lb per inch, Black Powder Coat with Yellow Stripe - Holds up to 20 pounds per inch determined by the iron content of the tool or part. Designed to securely hold hammers, wrenches, screwdrivers, and iron parts on one side only. Available in 6″, 13″, 18″, 24″ widths with black powder coat or silver nickel plate finish. Heavy-duty, steel with all-welded construction, ceramic magnets, black powder coat finish and yellow tape. 6″ width, 1625″ height, 1125″ depth approximate overall dimensions screw mount by the two welded, steel tabs with 1/4″ diameter holes screws are included.

 

Triton Products KTI-72450 MagClip Magnetic Steel Double Prong Tool Holder 4-Inch L by 2-Inch W by 3-Inch H Black

Triton Products KTI-72450 MagClip Magnetic Steel Double Prong Tool Holder 4-Inch L by 2-Inch W by 3-Inch H, Black

Triton Products KTI-72450 MagClip Magnetic Steel Double Prong Tool Holder 4-Inch L by 2-Inch W by 3-Inch H, Black - Magnet will not lose holding power over time. Holding capacity can be influenced by the thickness and finish of attaching surface. Screw-hole design also allows for easy mounting to non-ferrous surfaces. Holds heavy tools up to 11-pound including (hammer, mallet, wrench, etc) as well as irregular shaped tools.