Best 24 Standard Fasteners

 

10-Pack 14-20 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) 1/4-20 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) 1/4-20 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - â€¢ Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 430 • thickness max. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 225 • wrench size 7/16″ • system of measurement imperial (inch) • series ne additional information about zinc plated nylon insert lock nuts. • we continue to strive for 100% customer satisfaction on each transaction. 439 • with across the flat min. • Our fasteners are held to strict standards and are tested for quality. 298 • hex height min. • Also known as an elastic stop nut. 16. Fastener pro 1/4-20 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. 328 • thickness min. 6 • thread requirements asme b1. 1 class 2b • thread direction right hand • thread density coarse • diameter 1/4″ • thread count 20 • with across the flat max. • Nylon insert lock nuts grips threads to help prevent loosening. • The nylon insert helps prevent loosening when nut is threaded to another component.

 

10-Pack 8 x 1 Hex Washer Head Self Drilling Tek Screw Zinc Plated Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 031″ • washer thickness min 0. 322″ • head height max 0. 141″ • head height min 0. • We continue to strive for 100% customer satisfaction on each transaction. 115″ • washer thickness max 0. Fastener pro #8 x 1″ self drilling hex tek screw • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #8 • length 1″ • head diameter max 0. • Our fasteners are held to strict standards and are tested for quality. 348″ • head diameter min 0. 019″ • width across the flats 1/4″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program.

 

15-Pack 14 x 1 Hex Lag Screw Zinc Plated Steel Meets ASME B1821 Standards by Fastener Pro

(15-Pack) 1/4″ x 1″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro

(15-Pack) 1/4″ x 1″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro - Fastener pro, build with confidence. Quality tested, meets asme b1821 standards. Easy to use & ready to install (best if used with pilot holes). Trusted & approved manufacturer. 1/4″, zinc plated steel, hex head lag screw.

 

14-20 x 12 Hex Bolt Black Oxide Steel Meets ASME B1821 Standards by Fastener Pro 50-Pack

1/4-20 x 1/2″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (50-Pack)

1/4-20 x 1/2″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (50-Pack) - 438 • width across flats min 0. 163 • head height min 0. 428 • width across corners max 0. 488 • rohs compliant • wrench size 7/16″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Our fasteners are held to strict standards and are tested for quality. 150 • body diameter max 0. • We continue to strive for 100% customer satisfaction on each transaction. 505 • width across corners min 0. Fastener pro 1/4-20 x 1/2″ hex bolt, black oxide, steel • material steel • finish black oxide (oil finish) • thread direction right hand • thread density coarse • diameter 1/4″ • thread count 20 • length 1/2″ • head style hex • head height max 0. 245 • width across flats max 0. . 250 • body diameter min 0.

 

25-Pack 8 x 1 Hex Washer Head Self Drilling Tek Screw Zinc Plated Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(25-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(25-Pack) #8 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 322″ • head height max 0. • We continue to strive for 100% customer satisfaction on each transaction. • Our fasteners are held to strict standards and are tested for quality. 019″ • width across the flats 1/4″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 115″ • washer thickness max 0. 031″ • washer thickness min 0. 141″ • head height min 0. 348″ • head diameter min 0. Fastener pro #8 x 1″ self drilling hex tek screw • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #8 • length 1″ • head diameter max 0.

 

516-18 x 1 Hex Bolt Black Oxide Steel Meets ASME B1821 Standards by Fastener Pro 25-Pack

5/16-18 x 1″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack)

5/16-18 x 1″ Hex Bolt, Black Oxide, Steel, Meets ASME B18.2.1 Standards, by Fastener Pro (25-Pack) - â€¢ We continue to strive for 100% customer satisfaction on each transaction. 3125 • body diameter min 0. 3065 • width across flats max 0. 557 • rohs compliant • wrench size 1/2″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. Fastener pro 5/16-18 x 1″ hex bolt, black oxide, steel • material steel • finish black oxide (oil finish) • thread direction right hand • thread density coarse • diameter 5/16″ • thread count 18 • length 1″ • head style hex • head height max 0. 211 • head height min 0. 195 • body diameter max 0. • Our fasteners are held to strict standards and are tested for quality. 577 • width across corners min 0. 500 • width across flats min 0. 489 • width across corners max 0.

 

10-Pack 10 x 1 Hex Washer Head Self Drilling Sheet Metal Tek Screw 410 Stainless Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #10 x 1″ Hex Washer Head Self Drilling Sheet Metal Tek Screw, 410 Stainless Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #10 x 1″ Hex Washer Head Self Drilling Sheet Metal Tek Screw, 410 Stainless Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - â€¢ Self drilling screws are also known as tek screws. • Self-drilling tek screws have a special pointed end style that allows them to penetrate thin materials without a starting or pilot hole. • We continue to strive for 100% customer satisfaction on each transaction. 190″ • point type self drilling • head style hex washer • drive type external hex • material stainless steel • grade 410 (slightly magnetic) • diameter #10 • length 1″ • head diameter max 0. 414″ • head diameter min 0. Fastener pro #10 x 1″ self drilling hex tek screw • dimensional standard asme b18. 3, ifi-113 • diameter in inches 0. 151″ • head height min 0. • Our fasteners are held to strict standards and are tested for quality. 124″ • washer thickness max 0. 6. 031″ • washer thickness min 0. 384″ • head height max 0. 019″ • width across the flats 5/16″ additional information about zinc plated hex tek screws • important note use these stainless steel hex tek self-drilling screws on light gauge metals only. • Also known as self tapping screws or self drilling bolts, they cut or form threads to engage with the mating material. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program.

 

100 Count Ipe Clip Standard Fastener System - BLACK Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BLACK Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BLACK Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - Ideal for gripping in the contraction mode. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood. Optimum step sizes are 165-inch , 2-inch and 25-inch. 2-year warranty. Same jaw fixing system across all nova chuck models, total system interchangeability.

 

Pro Pack of 50Pcs 153 Series Standard Fasteners Standard Fastener-Floor Mount Anochrome

Pro Pack of 50Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome

Pro Pack of 50Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome - Description standard fastener-floor mount. 1 each. Finish anochrome.

 

10-Pack 10-32 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #10-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #10-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - 130 • thickness min. • We continue to strive for 100% customer satisfaction on each transaction. 117 • washer diameter max. • Referred to as keps or k-lock nuts. 362 • thickness max. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Our fasteners are held to strict standards and are tested for quality. Fastener pro #10-32 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. • Pre-assembled with a free spinning external tooth lock washer. 395 • wrench size 3/8″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. 1 class 2b • thread density fine • diameter #10 • thread count 32 • with across the flat max. 375 • with across the flat min. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. 406 • washer diameter min.

 

25-Pack 6-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(25-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(25-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 103 • wrench size 5/16″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. 6 • thread requirements asme b1. • Nylon insert lock nuts grips threads to help prevent loosening. 1 class 2b • thread direction right hand • thread density coarse • diameter #6 • thread count 32 • with across the flat max. 168 • hex height min. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Also known as an elastic stop nut. 188 • thickness min. • Our fasteners are held to strict standards and are tested for quality. Fastener pro #6-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. • We continue to strive for 100% customer satisfaction on each transaction. 16. 313 • with across the flat min. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. • The nylon insert helps prevent loosening when nut is threaded to another component. 305 • thickness max.

 

153 Series Standard Fasteners Standard Fastener-Floor Mount Anochrome

153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome

153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome - Description standard fastener-floor mount. 1 each. Finish anochrome.

 

Pro Pack of 10Pcs 153 Series Standard Fasteners Standard Fastener-Floor Mount Anochrome

Pro Pack of 10Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome

Pro Pack of 10Pcs, 153 Series Standard Fasteners, Standard Fastener-Floor Mount, Anochrome - Description standard fastener-floor mount. Finish anochrome. 1 each.

 

10-Pack 8-32 Keps Lock Nut Zinc Plated Steel with External Tooth Lockwasher Meets ASME B11 Class 2B Thread Standards by Fastener Pro

(10-Pack) #8-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro

(10-Pack) #8-32 Keps Lock Nut, Zinc Plated Steel, with External Tooth Lockwasher, Meets ASME B1.1 Class 2B Thread Standards, by Fastener Pro - 130 • thickness min. • Pre-assembled with a free spinning external tooth lock washer. • Referred to as keps or k-lock nuts. • External teeth pattern of the washer bite into both the nut and the base material to prevent loosening caused by vibration. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 344 • with across the flat min. 332 • thickness max. 117 • washer diameter max. . • We continue to strive for 100% customer satisfaction on each transaction. 381 • washer diameter min. • Our fasteners are held to strict standards and are tested for quality. 370 • wrench size 11/32″ • system of measurement imperial (inch) additional information about zinc plated keps lock nuts. Fastener pro #8-32 keps locknut zinc plated steel with external tooth lock washer (aka k-lock nut) • material steel • plating zinc • style with external tooth lockwasher • thread direction right hand • thread requirements asme b1. 1 class 2b • thread density coarse • diameter #8 • thread count 32 • with across the flat max.

 

175 Count Ipe Clip Standard Fastener System - PATINA GREY Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – PATINA GREY Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – PATINA GREY Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - 2-year warranty. Optimum step sizes are 165-inch , 2-inch and 25-inch. Ideal for gripping in the contraction mode. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood. Same jaw fixing system across all nova chuck models, total system interchangeability.

 

10-Pack 6-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) #6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 188 • thickness min. 103 • wrench size 5/16″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. 16. • The nylon insert helps prevent loosening when nut is threaded to another component. • Our fasteners are held to strict standards and are tested for quality. Fastener pro #6-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. 168 • hex height min. • We continue to strive for 100% customer satisfaction on each transaction. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. • Also known as an elastic stop nut. 1 class 2b • thread direction right hand • thread density coarse • diameter #6 • thread count 32 • with across the flat max. 305 • thickness max. 6 • thread requirements asme b1. 313 • with across the flat min. • Nylon insert lock nuts grips threads to help prevent loosening.

 

10-Pack 8-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro

(10-Pack) #8-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro

(10-Pack) #8-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro - 336 • thickness max. 219 • hex height min. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 345 • with across the flat min. • We continue to strive for 100% customer satisfaction on each transaction. 16. 6 • thread requirements asme b1. 1 class 2b • thread direction right hand • thread density coarse • diameter #8 • thread count 32 • with across the flat max. Fastener pro #8-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. • The nylon insert helps prevent loosening when nut is threaded to another component. • Also known as an elastic stop nut. 239 • thickness min. • Our fasteners are held to strict standards and are tested for quality. 140 • wrench size 11/32″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • Nylon insert lock nuts grips threads to help prevent loosening.

 

10-Pack 14 x 2-12 Hex Lag Screw Zinc Plated Steel Meets ASME B1821 Standards by Fastener Pro

(10-Pack) 1/4″ x 2-1/2″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro

(10-Pack) 1/4″ x 2-1/2″ Hex Lag Screw, Zinc Plated Steel, Meets ASME B18.2.1 Standards, by Fastener Pro - Easy to use & ready to install (best if used with pilot holes). 1/4″, zinc plated steel, hex head lag screw. Quality tested, meets asme b1821 standards. Fastener pro, build with confidence. Trusted & approved manufacturer.

 

Knape Vogt 153 Standard fastener floor mount steel anochrome Knape Vogt 153 Standard fastener floor mount steel anochrome

Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome, Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome

Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome, Knape & Vogt, 153, Standard fastener, floor mount, steel, anochrome - Fastener pro, build with confidence. Packed in quantity of 100 pcs. Trusted & approved manufacturer. Meets asme b11 class 2b / asme b18166 standards. Easy to use & ready to install.

 

10-Pack 12 x 1 Hex Washer Head Self Drilling Tek Screw Zinc Plated Steel Meets ASME B1863IFI-113 Standards by Fastener Pro

(10-Pack) #12 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro

(10-Pack) #12 x 1″ Hex Washer Head Self Drilling Tek Screw, Zinc Plated Steel, Meets ASME B18.6.3/IFI-113 Standards, by Fastener Pro - 3, ifi-113 • point type self drilling • head style hex washer • drive type external hex • material steel • plating zinc • diameter #12 • length 1″ • head diameter max 0. 161″ • washer thickness max 0. 432″ • head diameter min 0. • Our fasteners are held to strict standards and are tested for quality. 398″ • head height max 0. 022″ • width across the flats 5/16″ fastener pro build with confidence • your #1 source for quality fasteners through the fba program. • We continue to strive for 100% customer satisfaction on each transaction. 039″ • washer thickness min 0. 6. Fastener pro #12 x 1″ self drilling hex tek screw • dimensional standard asme b18. 194″ • head height min 0.

 

175 Count Ipe Clip Standard Fastener System - BROWN Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(175 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - 2-year warranty. Optimum step sizes are 165-inch , 2-inch and 25-inch. Same jaw fixing system across all nova chuck models, total system interchangeability. Ideal for gripping in the contraction mode. 3 step sizes for optimum gripping of footed bowls with minimal crush damage to wood.

 

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard Metric

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard & Metric

Fastener Screw Bolt Nut Thread Measure Gauge Size Checker Standard & Metric - Ruler marked with inches and millimeters for worldwide use resists water, alcohol, oil, and grease. Excellent for sizing bolts, screws, nuts (uss, sae, and metric) and twist drills size bolt diameter by pushing bolt through sizing holes. Measure us and metric thread pitch special notch gauges flat headed metal and wood screws. Reliable and accurate sturdy and lightweight plastic. Gauges hex nuts and washers (uss, sae) gauges metric hex nuts and washers by holding under metric holes.

 

6-32 Nylon Insert Lock Nut Zinc Plated Steel Meets ASME B11 Class 2B ASME B18166 Standards by Fastener Pro 100-Pack

#6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro (100-Pack)

#6-32 Nylon Insert Lock Nut, Zinc Plated Steel, Meets ASME B1.1 Class 2B/ ASME B18.16.6 Standards, by Fastener Pro (100-Pack) - 6 • thread requirements asme b1. • Nylon insert lock nuts grips threads to help prevent loosening. 103 • wrench size 5/16″ • system of measurement imperial (inch) • series nm additional information about zinc plated nylon insert lock nuts. 16. • Our fasteners are held to strict standards and are tested for quality. Fastener pro build with confidence • your #1 source for quality fasteners through the fba program. 313 • with across the flat min. 188 • thickness min. Fastener pro #6-32 nylon insert locknut zinc plated steel (aka elastic stop nut) • material steel • plating zinc • dimensional standard asme b18. 305 • thickness max. • We continue to strive for 100% customer satisfaction on each transaction. • The nylon insert helps prevent loosening when nut is threaded to another component. • Important note the nylon insert can absorb moisture in wet environments, which can cause the insert to become brittle over time. 1 class 2b • thread direction right hand • thread density coarse • diameter #6 • thread count 32 • width across the flat max. • Also known as an elastic stop nut. 168 • hex height min.

 

100 Count Ipe Clip Standard Fastener System - BROWN Round Clips with 8 x 2 316 Grade Stainless T10 - Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws

(100 Count) Ipe Clip Standard Fastener System – BROWN Round Clips with #8 x 2″, 316 Grade Stainless T10 – Star Drive Screws - All nova chuck accessory jaws are designed to hold in the expansion and contraction modes. Perfect for small bowls and unsupported spigot work. 2-year warranty. Special nova dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. Same jaw fixing system across all nova chuck models, total system interchangeability.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.