Best 23 Mortise Chisels

 

CMT 54306451 Mortise Chisel Bit Set 14-Inch Diameter 34-Inch Shank

CMT 543.064.51 Mortise Chisel & Bit Set, 1/4-Inch Diameter, 3/4-Inch Shank

CMT 543.064.51 Mortise Chisel & Bit Set, 1/4-Inch Diameter, 3/4-Inch Shank - It isn’t the easiest joint to make, but it sure helps to have the best quality tools in your shop. It’s tough to beat the “old faithful” mortise and tenon joint for strength and accuracy, even with all the other joining options in the world of woodworking. .

 

Kirschen - Mortise Chisel with hornbeam handle

Kirschen – Mortise Chisel with hornbeam handle

Kirschen – Mortise Chisel with hornbeam handle - Kirschen, german made hornbeam handled bench mortice chisel with shock washer and polished blade, see more at http//wwwthewoodworkscomau/shop/spares/search-by-brand/kirschen/chisel-mortice-hornbeam-handle-kirschen-detail#sthashrryrriwfdpuf. Chisel width 16mm handle length 125mm. Heavy duty mortice chisels, fitted with large hornbeam handles a leather washer is fitted between the stout rectangular section blade and the handle the handle is reinforced with a steel ferrule and top ring these are very traditional tools made to kirschen’s traditional high quality made in germany. Mortise chisel heavy, strong pattern, with heavy round hornbeam handle and leather disc. Kirschen joiner’s mortice chisels.

 

CMT 54315851 Mortise Chisel Bit Set 58-Inch Diameter 34-Inch Shank

CMT 543.158.51 Mortise Chisel & Bit Set, 5/8-Inch Diameter, 3/4-Inch Shank

CMT 543.158.51 Mortise Chisel & Bit Set, 5/8-Inch Diameter, 3/4-Inch Shank - It’s tough to beat the “old faithful” mortise and tenon joint for strength and accuracy, even with all the other joining options in the world of woodworking. . It isn’t the easiest joint to make, but it sure helps to have the best quality tools in your shop.

 

600 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4176

600 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4176

600 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4176 - A 220 grit diamond cone replacement is also available, sold separately. The quick change 600 grit diamond cone replacement is used for finishing the final edge of your mortise chisel.

 

Sorby 332 Mortise Chisel 12

Sorby 332 Mortise Chisel, 1/2″

Sorby 332 Mortise Chisel, 1/2″ - . Sorby’s 1/2″ 332 mortise chisel is a combination of the sorby 331 sash mortise chisel blade with an unbreakable cab (plastic) handle. Like all sorby cutting tools, each chisel is tested for diamond hardness prior to leaving the factory. Each blade features side relief, making it easier to remove stock in combination with the cab handle that can take a hit when doing heavy stock removal. Lifetime guarantee from robert sorby.

 

Sorby 332 Mortise Chisel 38

Sorby 332 Mortise Chisel, 3/8″

Sorby 332 Mortise Chisel, 3/8″ - Like all sorby cutting tools, each chisel is tested for diamond hardness prior to leaving the factory. Sorby’s 3/8″ 332 mortise chisel is a combination of the sorby 331 sash mortise chisel blade with an unbreakable cab (plastic) handle. Each blade features side relief, making it easier to remove stock in combination with the cab handle that can take a hit when doing heavy stock removal. Lifetime guarantee from robert sorby.

 

3-Pc Mortise Chisel Sharpening Set

3-Pc. Mortise Chisel Sharpening Set

3-Pc. Mortise Chisel Sharpening Set - Cone shape puts the final edge on inside bevels. Keep hollow mortising chisel edges sharp for fast and efficient cuttingdiamond-coated abrasives hone the hardest steel, including carbide. Set includes ergonomic handle for comfortable, slip-resistant gripping power. Sharpens mortising chisels up to 1/2″ size. Set includes handle, 1/4″ quick-change chuck, 2 diamond cones (coarse and fine grit). Sharpens mortising chisels up to 1/2″ size. Please note we have lowered the price of our current inventory due to some slight blemishing that has occurred on the metal collar. The blemish is cosmetic only, and has no effect on the strength of the chisel handle. Cone shape puts the final edge on inside bevels. 1/4″ quick-change chuck coarse 220 grit cone for removing nicks and burrs fine 600 grit cone for final honed cutting edge.

 

Premium Mortise Chisel Bit 12 Inch Set

Premium Mortise Chisel & Bit 1/2 Inch Set

Premium Mortise Chisel & Bit 1/2 Inch Set - Sorby’s most popular mortise chisel. Includes factory warranty. Sash mortise blade with side relief.

 

CSLU-Tool Woodworker Square Hole Drill Bits Mortising Chisel Set Mortise Chisel Bit Set  14-Inch 516-Inch 38-Inch 916-Inch 58-Inch and 12-Inch

CSLU-Tool Woodworker Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set ( 1/4-Inch, 5/16-Inch, 3/8-Inch, 9/16-Inch, 5/8-Inch and 1/2-Inch)

CSLU-Tool Woodworker Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set ( 1/4-Inch, 5/16-Inch, 3/8-Inch, 9/16-Inch, 5/8-Inch and 1/2-Inch) - Special steel, heat treatment, hrc48~50, high hardness, lengthened core, high concentricity. 5mm)75mm 1/2″(12. 7mm) approx 206g 005 9/16″(14mm) approx 251g 006 5/8″(16mm) approx 310g shaft length 1/4″(6. 7mm)60mm 9/16″(14mm)70mm 5/8″(16mm)70mm package included 6x tenon hole drill bit. Specifications material hss hardness hrc 48~50 holder diameter 19mm (circular) drilling core length 200mm slotting flute diameter total weight 001 1/4″(6. Features professional wood drill bit, suitable for construction, installation, renovation, decoration industry, etc. 5mm) approx 177g 004 1/2″(12. 35mm) approx 150g 002 5/16″(8mm) approx 161g 003 3/8″(9. 35mm) 60mm 5/16″(8mm)60mm 3/8″(9. It will get double effect by matched use with mortise and tenon machine, the square hole punching needs to use electric drill, hammer & other tools.

 

Matsumura Japanese White Steel Mortise Chisel - 6mm - 14

Matsumura Japanese White Steel Mortise Chisel – 6mm – 1/4″

Matsumura Japanese White Steel Mortise Chisel – 6mm – 1/4″ - The handles are double hooped to stand-up to heavy work. The overall length is 12″ and the blade length is 3-1/2″. Each mortise chisel is fully sharpened. The blades are finished in the traditional manner. Mortise chisels are made with a square section and a heavy body. Mr. The handles are hand-turned from best quality akagashi (japanese red oak), noted for its strength and endurance. They are intended for deep mortise work in carpentry and heavy cabinet work. Matsumura handforges these blades from “white” steel laminated to wrought iron and tempers each blade to rc 64.

 

58 Robert Sorby 288 HD Sash Mortise Chisel

5/8″ Robert Sorby #288 HD Sash Mortise Chisel

5/8″ Robert Sorby #288 HD Sash Mortise Chisel - A massively proportioned extra heavy duty chisel used primarily in timber framing. Made in england. Ideal for getting into deep, difficult to reach, mortises where extreme blade strength is required. Each chisel has a 7-5/8″ long blade and an overall length of 14-1/2″. The super thick ash handle is hooped and both top and bottom for additional strength.

 

MHG 316 Mortise Chisel

MHG 3/16″ Mortise Chisel

MHG 3/16″ Mortise Chisel - The square hole punching needs to use electric drill, hammer & other tools. It will get double effect by matched use with mortise and tenon machine. Special steel, heat treatment, hrc48~50, high hardness, lengthened core, high concentricity. Suitable for construction, installation, renovation, decoration industry, etc. Professional wood drill bit.

 

Chisel  Mortise Chisel Set - 4-pcs

Chisel / Mortise Chisel Set – 4-pcs

Chisel / Mortise Chisel Set – 4-pcs - The blade is forged from cr-mn steel and heat treated up to 59 hrc. Robust tool used for chopping out joints as well as cutting mortises. Excellent cutting performance is reached by side tapering in height and lenghtwise. The handle is made of dark stained and waxed beech wood with steel ferrule and hoop. From tip to shoulder for sidewall clearance.

 

CMT 54312751 Mortise Chisel Bit Set 12-Inch Diameter 34-Inch Shank by CMT

CMT 543.127.51 Mortise Chisel & Bit Set, 1/2-Inch Diameter, 3/4-Inch Shank by CMT

CMT 543.127.51 Mortise Chisel & Bit Set, 1/2-Inch Diameter, 3/4-Inch Shank by CMT - Cmt 54312751 mortise chisel & bit set, 1/2-inch diameter, 3/4-inch shank. Cutting edge of shirogami hagane (white steel) hardened to rockwell c64. Handle of akagashi (japanese red oak) double hooped with blued steel ring at top. Overall length 12″, blade length is 3-1/2″.

 

14 English Mortise Chisel

1/4″ English Mortise Chisel

1/4″ English Mortise Chisel - . Made in sheffield england, these tools are for mortise and general heavy duty work. They are among the finest chisels make in the world today, crafted like tools made years ago. These tools feature a stout, square blade, a leather shock washer, and a double hooped ash handle.

 

4-Piece Mortise Chisel and Bit Set

4-Piece Mortise Chisel and Bit Set

4-Piece Mortise Chisel and Bit Set - Includes factory warranty. 1/4-inch, 5/16-inch, 3/8-inch, 9/16-inch, 5/8-inch and 1/2-inch sizes. Hardness hrc 48~50. High performance flute design geometry for superior chip extraction. Made of the highest quality tool steel.

 

uxcell Silver Gray Black Hollow Square Mortise Chisel w Bit Tool 12

uxcell® Silver Gray Black Hollow Square Mortise Chisel w Bit Tool 1/2″

uxcell® Silver Gray Black Hollow Square Mortise Chisel w Bit Tool 1/2″ - Chisel depth 70mm / 28″bit shank diameter 9mm / 035″. Product name square chisel mortisermaterial metalchisel side length 126mm / 1/2″. Total size 20 x 2cm / 79″ x 08″(lmaxd)color silver gray, black. Weight 123gpackage content 1 x square hollow chisel bit mortiser. Bit tip width 12mm / 1/2″bit flute length 77mm / 3″.

 

38 Robert Sorby 288 HD Sash Mortise Chisel

3/8″ Robert Sorby #288 HD Sash Mortise Chisel

3/8″ Robert Sorby #288 HD Sash Mortise Chisel - A massively proportioned extra heavy duty chisel used primarily in timber framing. Made in england. Each chisel has a 7-5/8″ long blade and an overall length of 14-1/2″. Ideal for getting into deep, difficult to reach, mortises where extreme blade strength is required. The super thick ash handle is hooped and both top and bottom for additional strength.

 

220 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4177

220 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4177

220 Grit Diamond Replacement Cone For Mortise Chisel Sharpening Set By Peachtree Woodworking PW4177 - A 600 grit diamond cone replacement is also available, sold separately. The quick change 220 grit diamond cone replacement is used for removing nicks and burrs of your mortise chisel.

 

Powermatic 1791095 34 Inch Premium Mortise Chisel Bit

Powermatic 1791095 3/4 Inch Premium Mortise Chisel & Bit

Powermatic 1791095 3/4 Inch Premium Mortise Chisel & Bit - Includes factory warranty. Diamond-coated abrasives hone the hardest steel.

 

Powermatic 1791091 14 in Mortise Chisel and Bit

Powermatic 1791091 1/4 in. Mortise Chisel and Bit

Powermatic 1791091 1/4 in. Mortise Chisel and Bit - Ground and hardened carbon steel for efficient performance and long life extra long bits for compatibility with different mortisers makes consistently clean cuts with smooth side walls.

 

Atoplee Woodworker 38 Inch Square Hole Drill Bits Mortising Chisel Set Mortise Chisel Bit Set

Atoplee Woodworker 3/8 Inch Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set

Atoplee Woodworker 3/8 Inch Square Hole Drill Bits Mortising Chisel Set, Mortise Chisel & Bit Set - Professional wood drill bit. The square hole punching needs to use electric drill, hammer & other tools. Special steel, heat treatment, hrc48~50, high hardness, lengthened core, high concentricity. It will get double effect by matched use with mortise and tenon machine. Suitable for construction, installation, renovation, decoration industry, etc.

 

Two Cherries 500-2012 Two Cherries Heavy Duty Mortise Chisel -12mm

Two Cherries 500-2012 Two Cherries Heavy Duty Mortise Chisel -12mm

Two Cherries 500-2012 Two Cherries Heavy Duty Mortise Chisel -12mm - This is a very large, extra strong tool, forged from the best german steel and fitted with a beefy hornbeam handle. If you are serious about hand cut mortise and tenon work, here is the tool for you. It’s built to take the punishment of heavy and continuous use. .