Best 23 Carbide Countersinks for 2020

 

14 6 Flute 90-Deg Carbide Countersink Single End 336-003070 #ad

1/4″ 6 Flute 90-Deg. Carbide Countersink Single End 336-003070

1/4″ 6 Flute 90-Deg. Carbide Countersink Single End 336-003070 #ad - Something about us touhia have the customers satisfaction for their first priority if you have any questions, please feel free to contact us by mail first and we will offer our best service for you. Package content 6 x titanium plated carbon steel countersink drill bit. Countersink drill bit with 90 degree on the point for sharp and precise countersinking. Countersink dirll bit with 1/4 inch hex shank that fits most power tools. Chatter-free & five-flute designed with staggered cutting teeth aranged to insure free chip flow and rapid chatter free cutting.

 

Carbide Countersinks - OD 38  DHD 316 #ad

Carbide Countersinks – OD 3/8 | DHD 3/16

Carbide Countersinks – OD 3/8 | DHD 3/16 #ad - Legend (in inches unless otherwise noted) od = outside diameter dhd = drill hole diameter technical info w. Great for formica, fiberglass, particleboard, etc. The carbide countersink is not designed for use in metals or in hand held equipment and is solely designed to cut abrasive material. Is a family owned, third generation, manufacturer of the best countersinks, counterbores, plug cutters, taper point drills, brad-point drills, and step drills. L. Manufactured from ferro-tic machinable carbide and hardened for long wear in abrasive materials. Fuller inc. They have over 60 years of experience in manufacturing tools to cut woods, plastics, and metals. Legend below explains sizing.

 

Alfa Tools CC1F69026 58 Single Flute 90° Carbide Countersink #ad

Alfa Tools CC1F69026 5/8″ Single Flute 90° Carbide Countersink

Alfa Tools CC1F69026 5/8″ Single Flute 90° Carbide Countersink #ad - Suitable for chamfering, countersinking and deburring holes. Wear-resistant, heat-resistant micrograin solid carbide provides increased tool life in production applications. Not recommended for use in hardened steel.

 

Kodiak Cutting Tools KCT119513 USA Made Solid Carbide Countersink 6 Flute 60 Degree 38 Diameter #ad

Kodiak Cutting Tools KCT119513 USA Made Solid Carbide Countersink, 6 Flute, 60 Degree, 3/8″ Diameter

Kodiak Cutting Tools KCT119513 USA Made Solid Carbide Countersink, 6 Flute, 60 Degree, 3/8″ Diameter #ad - 3/8 inch diameter solid carbide countersink, six flute 60 degree countersink.

 

Kodiak Cutting Tools KCT119337 USA Made Solid Carbide Countersink 3 Flute 90 Degree 58 Diameter #ad

Kodiak Cutting Tools KCT119337 USA Made Solid Carbide Countersink, 3 Flute, 90 Degree, 5/8″ Diameter

Kodiak Cutting Tools KCT119337 USA Made Solid Carbide Countersink, 3 Flute, 90 Degree, 5/8″ Diameter #ad - 5/8 inch diameter solid carbide countersink, three flute 90 degree countersink.

 

Kodiak Cutting Tools KCT216555 USA Made Carbide Countersink 6 Flute 34 Diameter 38 Shank 2-34 Overall Length #ad

Kodiak Cutting Tools KCT216555 USA Made Carbide Countersink, 6 Flute, 3/4″ Diameter, 3/8″ Shank, 2-3/4″ Overall Length

Kodiak Cutting Tools KCT216555 USA Made Carbide Countersink, 6 Flute, 3/4″ Diameter, 3/8″ Shank, 2-3/4″ Overall Length #ad - 3/4 inch diameter centerdrill and countersink carbide countersink 3/8″ shank 2-3/4″ overall length 6 flute countersink.

 

Amana Tool - 55293 Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop 38 Dia x 764 Drill Dia x 14 In #ad

Amana Tool – (55293) Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop, 3/8 Dia x 7/64 Drill Dia x 1/4 In

Amana Tool – (55293) Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop, 3/8 Dia x 7/64 Drill Dia x 1/4 In #ad - The large openings around the collar allow the chips to clear effectively and eliminate clogging, #55293, (a°) angle 49°, (b) cutting height 9mm, (d) diameter 3/8, (d) shank 1/4, overall length (l) 2-3/8, drill din 1897, wood screw size 4, d1 7/64, replacement drill 630-224, 55293 carbide tipped 82 degree countersink with adjustable low friction depth stop, 3/8 dia x 7/64 drill dia x 1/4 inch quick release hex shank. The countersink leaves a clean hole edge and the adjustable depth-stop doesn’t mar the surface. These tools combine carbide countersink, high-speed-steel drill bit and free-spinning, low friction depth-stop.

 

Amana Tool - 55202 Carbide Tipped 82° Countersink 6 Screw 38 Dia x 18 Drill Dia x #ad

Amana Tool – 55202 Carbide Tipped 82° Countersink #6 Screw 3/8 Dia x 1/8 Drill Dia x

Amana Tool – 55202 Carbide Tipped 82° Countersink #6 Screw 3/8 Dia x 1/8 Drill Dia x #ad - Carbide tips provide chip free hole edges and lasts much longer than steel countersinks. Used to countersink holes for the heads of screws in woods, plastic and non-ferrous materials. The 2-flute integral design ensures uniform and concentric results each and every time. Available in a wide variety of sizes, complete with the hss m2 fully ground drill bit, #55202, (a°) angle 49°, (b) cutting height 1/2, (d) diameter 3/8, (d) shank 5/16, overall length (l) 2-9/16, wood screw size #6, d1 1/8, replacement drill 630-102, l1 1-5/8, 55202 carbide tipped 82 degree countersink #6 screw 3/8 dia x 1/8 drill dia x 5/16 round shank.

 

Kodiak Cutting Tools KCT118886 USA Made Solid Carbide Countersink Single Flute 60 Degree 12 Diameter #ad

Kodiak Cutting Tools KCT118886 USA Made Solid Carbide Countersink, Single Flute, 60 Degree, 1/2″ Diameter

Kodiak Cutting Tools KCT118886 USA Made Solid Carbide Countersink, Single Flute, 60 Degree, 1/2″ Diameter #ad - 1/2 inch diameter solid carbide countersink, single flute 60 degree countersink.

 

Alfa Tools CC1F66027 34 Single Flute 60° Carbide Countersink #ad

Alfa Tools CC1F66027 3/4″ Single Flute 60° Carbide Countersink

Alfa Tools CC1F66027 3/4″ Single Flute 60° Carbide Countersink #ad - Not recommended for use in hardened steel. Suitable for chamfering, countersinking and deburring holes. Wear-resistant, heat-resistant micrograin solid carbide provides increased tool life in production applications.

 

Accusize Industrial Tools 14 12 and 1-14 82 Degree Indexable Carbide Countersinks 0046-0982 #ad

Accusize Industrial Tools, 1/4”, 1/2” and 1-1/4” 82 Degree Indexable Carbide Countersinks, 0046-0982

Accusize Industrial Tools, 1/4”, 1/2” and 1-1/4” 82 Degree Indexable Carbide Countersinks, 0046-0982 #ad - 3 pcs/set 1/4”, 1/2”, and 1-1/4”, 82°. Positive rake makes for smooth cutting without chatter carbide indexable. No tool resharpening needed comes with inserts. The carbide inserts are 1/4″-3/4″ x 1/2″shank tcmt3251 triangle inserts 1/2″, 1-3/4″ x 1/2″shank, scmt431 square inserts 1-1/4″, 2-1/4″ x 3/4″shank, scmt431 square insert.

 

Kodiak Cutting Tools KCT216412 USA Made Carbide Countersink 3 Flute 316 Diameter 316 Shank 2 Overall Length #ad

Kodiak Cutting Tools KCT216412 USA Made Carbide Countersink, 3 Flute, 3/16″ Diameter, 3/16″ Shank, 2″ Overall Length

Kodiak Cutting Tools KCT216412 USA Made Carbide Countersink, 3 Flute, 3/16″ Diameter, 3/16″ Shank, 2″ Overall Length #ad - 3/16 inch diameter centerdrill and countersink carbide countersink 3/16″ shank 2″ overall length 3 flute countersink.

 

Kodiak Cutting Tools KCT119150 USA Made Solid Carbide Countersink 3 Flute 60 Degree 12 Diameter #ad

Kodiak Cutting Tools KCT119150 USA Made Solid Carbide Countersink, 3 Flute, 60 Degree, 1/2″ Diameter

Kodiak Cutting Tools KCT119150 USA Made Solid Carbide Countersink, 3 Flute, 60 Degree, 1/2″ Diameter #ad - 1/2 inch diameter solid carbide countersink, three flute 60 degree countersink.

 

Amana Tool - PS-500 5Piece Carbide Tipped Countersink Steel Plug Cutter Set Includes #ad

Amana Tool – PS-500 5Piece Carbide Tipped Countersink & Steel Plug Cutter Set (Includes

Amana Tool – PS-500 5Piece Carbide Tipped Countersink & Steel Plug Cutter Set (Includes #ad - Description all 4 countersinks & drills & 1 plug cutter. Commitment to offer the highest consistent quality and innovative products. Usa corporate headquarters and warehouse, located in new york. Devotion to consistently providing the highest quality. Solutions for manufacturers, fabricators, display and cabinet professionals.

 

Alfa Tools CC1F68229 1 Single Flute 82° Carbide Countersink #ad

Alfa Tools CC1F68229 1″ Single Flute 82° Carbide Countersink

Alfa Tools CC1F68229 1″ Single Flute 82° Carbide Countersink #ad - Wear-resistant, heat-resistant micrograin solid carbide provides increased tool life in production applications. Suitable for chamfering, countersinking and deburring holes. Not recommended for use in hardened steel.

 

Kodiak Cutting Tools KCT216291 USA Made Carbide CenterDrill and Countersink 2 Flute 0 Diameter 18 Shank 1-12 Overall Length #ad

Kodiak Cutting Tools KCT216291 USA Made Carbide CenterDrill and Countersink, 2 Flute, 0 Diameter, 1/8″ Shank, 1-1/2″ Overall Length

Kodiak Cutting Tools KCT216291 USA Made Carbide CenterDrill and Countersink, 2 Flute, 0 Diameter, 1/8″ Shank, 1-1/2″ Overall Length #ad - #0 inch diameter center drill and countersink carbide drill & countersink 1/8″ shank 1-1/2″ overall length 2 flute combined drill & countersink, carbide.

 

PART NO SGS74101 SGS Tool 017350 Single Flute Carbide Countersink 18 82 Deg 18 Shank #ad

PART NO. SGS74101 SGS Tool 017350, Single Flute Carbide Countersink, 1/8″, 82 Deg., 1/8 Shank

PART NO. SGS74101 SGS Tool 017350, Single Flute Carbide Countersink, 1/8″, 82 Deg., 1/8 Shank #ad - The sgs countersinks are available with 3 different countersinking angles 60°, 82° and 90°. They are also available in various flute counts with a single flute, 3 flute and six flute version. Part no. , 1/8 shank. The single flute version is ideal for softer materials, the 3 flute for general materials and the six flute for harder materials. Sgs74101 sgs tool 017350, single flute carbide countersink, 1/8″, 82 deg.

 

Amana Tool - 55294 Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop 38 Dia x 18 Drill Dia x 14 Inc #ad

Amana Tool – (55294) Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop, 3/8 Dia x 1/8 Drill Dia x 1/4 Inc

Amana Tool – (55294) Carbide Tipped 82° Countersink with Adjustable Low Friction Depth Stop, 3/8 Dia x 1/8 Drill Dia x 1/4 Inc #ad - The large openings around the collar allow the chips to clear effectively and eliminate clogging, #55294, (a°) angle 49°, (b) cutting height 9mm, (d) diameter 3/8, (d) shank 1/4, overall length (l) 2-3/8, drill din 1897, wood screw size 6, d1 1/8, replacement drill 630-226, 55294 carbide tipped 82 degree countersink with adjustable low friction depth stop, 3/8 dia x 1/8 drill dia x 1/4 inch quick release hex shank. The countersink leaves a clean hole edge and the adjustable depth-stop doesn’t mar the surface. These tools combine carbide countersink, high-speed-steel drill bit and free-spinning, low friction depth-stop.

 

Solid Carbide Countersink 38 x 316 #ad

Solid Carbide Countersink 3/8″ x 3/16″

Solid Carbide Countersink 3/8″ x 3/16″ #ad - Great for formica, fiberglass, particleboard, etc. Manufactured from ferro-tic ® machinable carbide and hardened for long wear in abrasive materials. The carbide countersink is not designed for use in metals or in hand held equipment and is solely designed to cut abrasive material.

 

Kodiak Cutting Tools KCT119260 USA Made Solid Carbide Countersink 3 Flute 82 Degree 34 Diameter #ad

Kodiak Cutting Tools KCT119260 USA Made Solid Carbide Countersink, 3 Flute, 82 Degree, 3/4″ Diameter

Kodiak Cutting Tools KCT119260 USA Made Solid Carbide Countersink, 3 Flute, 82 Degree, 3/4″ Diameter #ad - 3/4 inch diameter solid carbide countersink, three flute 82 degree countersink.

 

Kodiak Cutting Tools KCT119007 USA Made Solid Carbide Countersink Single Flute 82 Degree 1 Diameter #ad

Kodiak Cutting Tools KCT119007 USA Made Solid Carbide Countersink, Single Flute, 82 Degree, 1″ Diameter

Kodiak Cutting Tools KCT119007 USA Made Solid Carbide Countersink, Single Flute, 82 Degree, 1″ Diameter #ad - 1 inch diameter solid carbide countersink, single flute 82 degree countersink.

 

Amana Tool - 55336 Carbide Tipped 82° Countersink with Adjustable Depth Stop #ad

Amana Tool – 55336 Carbide Tipped 82° Countersink with Adjustable Depth Stop

Amana Tool – 55336 Carbide Tipped 82° Countersink with Adjustable Depth Stop #ad - 3mm) hex shank. Features an adjustable, heavy-duty, revolving depth-stop with a strong thrust ball bearing for quick and easy adjustment of the countersink depth without scratching or burning surfaces, #55336, (a°) angle 49°, (b) cutting height 3/64-3/8, (d) diameter 3/8, (d) shank 1/4, overall length (l) 2-5/8, drill din 1897, wood screw size 8, d1 5/32, replacement drill 630-230, replacement countersink 55274, use with plug cutter (optional) 55220, 55336 carbide tipped 82 degree countersink with adjustable depth stop and no-thrust ball bearing, hybrid compatible with festool centrotec system 3/8 dia x 5/32 drill dia x 1/4 inch quick release hex shank. Fits both festool centrotec drill machines and standard quick-change chucks for 1/4″ (6.

 

Amana Tool - 55295 Carbide Tipped 82° Countersink with Adjustable Low Friction Depth #ad

Amana Tool – 55295 Carbide Tipped 82° Countersink with Adjustable Low Friction Depth

Amana Tool – 55295 Carbide Tipped 82° Countersink with Adjustable Low Friction Depth #ad - These tools combine carbide countersink, high-speed-steel drill bit and free-spinning, low friction depth-stop. The countersink leaves a clean hole edge and the adjustable depth-stop doesn’t mar the surface. The large openings around the collar allow the chips to clear effectively and eliminate clogging, #55295, (a°) angle 49°, (b) cutting height 9mm, (d) diameter 1/2, (d) shank 1/4, overall length (l) 2-3/8, drill din 1897, wood screw size 6, d1 9/64, replacement drill 630-228, 55295 carbide tipped 82 degree countersink with adjustable low friction depth stop, 1/2 dia x 9/64 drill dia x 1/4 inch quick release hex shank.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.