Best 21 Center Punch Sets

 

General Tools SPC74 Round Shank Center Punches Set of 5 by General Tools

General Tools SPC74 Round Shank Center Punches, Set of 5 by General Tools

General Tools SPC74 Round Shank Center Punches, Set of 5 by General Tools - Points are ground to size for maximum strength and penetrationknurled bodystamped with size for quick identificationpacked in a vinyl case.

 

Coin Ring Center Punch for 50 Cent Piece Comes with 12 Punch and Die Set

Coin Ring Center Punch for 50 Cent Piece. Comes with 1/2″ Punch and Die Set.

Coin Ring Center Punch for 50 Cent Piece. Comes with 1/2″ Punch and Die Set. - Thanks for your business, and have a great day. 50 cent coin center punch set. The guide is reamed within. 0005″ (half of 1 thousand”) for 1/2″ shanked punches. I make coin rings as well. This is to be used in a press. Overall height is 2-3/4″ with a coin. Hammers ruin punches, and will void the warranty, no exceptions. Hardened, and hollow ground, and has a relief, to make it easier to get the coin back off. I have punched out over 200 plus coins with this same punch design and same punch, still truckin the punch body is fitted to the 50 cent coin and comes with 1/2″ punch and die set. Is 1-5/8″. S. The punch is o1 tool steel, 2 inches long. Hi up for sale is one, u. The o. This is an aluminum body and guide. D. The die is also o1 tool steel, hardened, and relief ground, so your blank falls out.

 

STARRETT 7PC Center Punch Set - Model S264WB Length Include all sizes above Diameter Include all sizes above

STARRETT 7PC Center Punch Set – Model: S264WB Length: Include all sizes above Diameter: Include all sizes above

STARRETT 7PC Center Punch Set – Model: S264WB Length: Include all sizes above Diameter: Include all sizes above - For marking the center of a hole to be drilled. Have a square knurled grip and will not roll when laid down. Hardened and properly tempered.

 

Coin Ring Center Punch for Quarters Comes with 12 Punch and Die Set 243mm

Coin Ring Center Punch for Quarters. Comes with 1/2″ Punch and Die Set. 24.3mm

Coin Ring Center Punch for Quarters. Comes with 1/2″ Punch and Die Set. 24.3mm - 3mm i. The o. Hi up for sale is one, u. This is an aluminum body and guide. This is to be used in a press. Hammers ruin punches, and will void the warranty, no exceptions. Overall height is 2-3/4″ with a coin. D. , For u. 0005″ (half of 1 thousand”) for 1/2″ shanked punches. The punch is o1 tool steel, 2 inches long. S. Quarters, and comes with 1/2″ punch and die set. The die is also o1 tool steel, hardened, and relief ground, so your blank falls out. Thanks for your business, and have a great day. Hardened, and hollow ground, and has a relief, to make it easier to get the coin back off. D. Quarter center punch set. Is 1-5/8″. I make coin rings as well. The guide is reamed within. S. I have punched out over 200 plus coins with this same punch design and same punch, still truckin the punch body is 24.

 

Fowler 52-500-015 Alloy Steel Center Punch Set 5 Pieces Model 52-500-015-0 Tools Hardware store

Fowler 52-500-015 Alloy Steel Center Punch Set, 5 Pieces, Model: 52-500-015-0, Tools & Hardware store

Fowler 52-500-015 Alloy Steel Center Punch Set, 5 Pieces, Model: 52-500-015-0, Tools & Hardware store - 878 to 8. If you experience any problem contact fowler directly for warranty claims. 15. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The fowler 54-565-233 high-accuracy ultima bore gauging system has a measurement range of 7. 27 and is accurate to + or, 0. The gauge has constant spring pressure for repeatability and bower’s fastfit measuring heads for rapid measurement. This product has 1 year warranty offered by fowler high precision. Resolution is 0. 00006. The ultima system requires connection to a sylvac or multiplexer display unit. 00001 and the measuring depth is 3.

 

4pc Center Punch Set

4pc Center Punch Set

4pc Center Punch Set - Used to mark the center of a point, resulting hole helps to guide tip of drill. Knurled (texured) grip allows for secure grip while using. A great variety to satisfy your drilling and marking needs. Heat treated, carbon steel construction for dependable use. Sizes, 1/4″, 3/16″, 5/32″, 1/8″ | each are about 35″ long.

 

TTC CPWD-88PC CENTERPUNCH SET

TTC CP/WD-88PC CENTER;PUNCH SET

TTC CP/WD-88PC CENTER;PUNCH SET - 5mm). 5mm), 5/64″ (2mm), 3/32″ (2. All sizes are packed to a special well finished wooden box for ease of storage and safety. 5mm), 1/8″ (3mm), 9/64″ (3. 5mm), 5/32″ (4mm), 3/16″ (5mm) and 7/32″ (5. Includes (1) each of 1/16″ (1.

 

Genius Tool PC575C - 5 Piece Center Punch Set by Genius Tools

Genius Tool PC575C – 5 Piece Center Punch Set by Genius Tools

Genius Tool PC575C – 5 Piece Center Punch Set by Genius Tools - Genius tool pc575c, 5 piece center punch set. Silverline 5 piece centre punch set. Size 80-100mm. Starrett center punch set, model s117pc diameter 1/16,5/64,3/32,1/8,5/32,1/4. Williams ps-4 4-piece center punch set.

 

S117Pc Center Punch Set Sold As 1 Set

S117Pc Center Punch Set, Sold As 1 Set

S117Pc Center Punch Set, Sold As 1 Set - Make clean holes in leather, vinyl, plastic, and soft metals. 3-1/2″ length with knurled handles for non-slip hold. High-carbon steel tempered to hardness 48-52 on rockwell scale for superior durability. Free & fast shipping. Hard-to-find micro-size punches in sae (standard) sizes 1/4″, 3/16″, 5/32″ & 1/8″ use with hammer or mallet (not included).

 

General Tools SPC74 Round Shank Center Punches Set of 5

General Tools SPC74 Round Shank Center Punches, Set of 5

General Tools SPC74 Round Shank Center Punches, Set of 5 - We strive to provide our customers with 100% satisfaction. This five-piece set includes our most popular punch sizes packaged in an accessible vinyl storage case. Made from hardened and ground alloy tool steel, these durable punches are built for a lifetime of dependable use. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and diyers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. General tools, the precise tool for doing the job exactly right. For inquiries, please contact our customer service department at 212-431-6100. Work smarter, measure better & be more productive with general tools. Unlike an automatic punch, the round shaft punches will not skip or bounce when struck, providing spot-on accuracy.

 

18pc Brass Steel Punch Set Solid w Automatic Pin Center and Storage Pouch

18pc Brass & Steel Punch Set Solid w/ Automatic Pin Center and Storage Pouch

18pc Brass & Steel Punch Set Solid w/ Automatic Pin Center and Storage Pouch - Professional quality solid micro grain carbide scriber at an affordable price. Solid 1/8″diameter tungsten carbide tip pressed into handle to prevent tip from loosening during use. Handle has non-slip finger grip surface for more positive control when using tool. Description this 18pc brass and steel punch set is great for the hobbiest and the professional alike 8pc solid brass punches 8pc heat treated steel punches sizes 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ and 5/16″ 1pc brass handle automatic center punch 1pc storage bag.

 

Center Punch Set 5 Pc

Center Punch Set, 5 Pc

Center Punch Set, 5 Pc - 06 -. Center punch set, length 3 to 5″, diameter 3/8″, number of pieces 5, material steel, adjustable no, replaceable point no, point. 25″, features precision centered tips for accuracy, hardened and tempered, knurled grip for secure holding.

 

Imperial 87127 Center Punch Set 5 Piece

Imperial 87127 Center Punch Set, 5 Piece

Imperial 87127 Center Punch Set, 5 Piece - Highlights hardened and tempered for maximum durability hot forged from alloy steel for maximum strength 5 piece set includes one each of hex size 1/4, 5/16, 3/8, 1/2 and 5/8 center punches and is packaged in a pouch.

 

Williams PS-4 4-Piece Center Punch Set

Williams PS-4 4-Piece Center Punch Set

Williams PS-4 4-Piece Center Punch Set - . Heavy duty construction for strength and durability. For cutting, shaping and removing metal softer than the cutting edge of the chisel.

 

STARRETT Center Punch Set - Model S117PC Diameter 1165643321853214

STARRETT Center Punch Set – Model: S117PC Diameter: 1/16″,5/64″,3/32″,1/8″,5/32″,1/4″

STARRETT Center Punch Set – Model: S117PC Diameter: 1/16″,5/64″,3/32″,1/8″,5/32″,1/4″ - Well-proportioned, hardened, properly tempered and have a knurled grip. . The points are ground at the proper angle to give maximum service and the tips are accurately centered.

 

Steelex D2530 Nail and Center Punch Set 4-Pc

Steelex D2530 Nail and Center Punch Set, 4-Pc

Steelex D2530 Nail and Center Punch Set, 4-Pc - It has 6-1/2″ auto punching tool. Its 5/32″ high letters. Tip sizes include 1/32-inch, 1/16-inch, 3/32-inch and 1/8-inch. It has 1-1/8″ long x 1/4″ hex stock. You can simply insert the stamp into the auto punch and push no hammer needed.

 

18 Pc Brass Steel Automatic Center Punch Set Gunsmith Machinist Auto ATE Tools

18 Pc Brass Steel Automatic Center Punch Set Gunsmith Machinist Auto ATE Tools

18 Pc Brass Steel Automatic Center Punch Set Gunsmith Machinist Auto ATE Tools - Quantity 1. Automatic center punch is used to create dimples or impressions on soft metals, wood, etc. Brass and steel punches are used for driving out pins in guns, machinery, automobiles, etc. Punch sizes 1/16″, 3/32″,1/8, 5/32″, 3/16″,7/32″, 1/4″, and 5/16″. Solid brass body with hardened steel tip. 8 pcs solid brass punches length 3-1/2″. Punch tip length 1″. . . Spring loaded automatic center punch length 5-1/2″. 8 pcs heat treated steel punches length 4″. Great for gunsmiths, machinists, automotive, craft, hobby etc. Punch sizes 1/16″, 3/32″, 1/8″, 5/32″, 3/16″,7/32″,1/4″, and 5/16″.

 

Sunex 9838 2Piece Automatic Center Punch Set

Sunex 9838 2Piece Automatic Center Punch Set,

Sunex 9838 2Piece Automatic Center Punch Set, - Other features include adjustable spring tension that allows for various levels of striking force and screw/drill bit starting capability. . Sunex 2-piece automatic center punch set’s tips are heat-treated for maximum durability.

 

4 Piece Nail Setter Center Punch Set

4 Piece Nail Setter & Center Punch Set

4 Piece Nail Setter & Center Punch Set - Raised shaft for better grip sets nail heads below wood surface for a smooth finished look. Set includes 1/32″ nail set, 1/16″ nail set, 3/32″ nail set, 1/8″ center punch. Center punch is used to mark the center of a point, it is usually used to mark the center of a hole when drilling holes. Punches are used to drive objects, such as nails, or to form an impression of the tip on a workpiece. Nail set is a great tool to recess nails into wood trim.

 

General Tools SPC74 Round Shank Center Punches Set of 5 by General Tools

General Tools SPC74 Round Shank Center Punches, Set of 5 by General Tools

General Tools SPC74 Round Shank Center Punches, Set of 5 by General Tools - Points are ground to size for maximum strength and penetrationknurled bodystamped with size for quick identificationpacked in a vinyl case.

 

Generic Heavy-Duty 4pc Center Punch Set - Solid Carbon Steel - 18 to 14 802471

Generic Heavy-Duty 4pc Center Punch Set – Solid Carbon Steel – 1/8″ to 1/4″ {8%0247?1}

Generic Heavy-Duty 4pc Center Punch Set – Solid Carbon Steel – 1/8″ to 1/4″ {8%0247?1} - Free & fast shipping. Make clean holes in leather, vinyl, plastic, and soft metals. High-carbon steel tempered to hardness 48-52 on rockwell scale for superior durability. Hard-to-find micro-size punches in sae (standard) sizes 1/4″, 3/16″, 5/32″ & 1/8″ use with hammer or mallet (not included). 3-1/2″ length with knurled handles for non-slip hold.