Best 10 Tapered End Mills

 

Conical Tool Company L-103 120° HSS Tapered End Mill - 3 Flute x 332 Tip x 04126 Large Diameter x 38 Shank x 34 Length of Cut x 2 78 Overall Length

Conical Tool Company L-103 12.0° HSS Tapered End Mill – 3 Flute x 3/32” Tip x 0.4126” Large Diameter x 3/8” Shank x 3/4” Length of Cut x 2 7/8” Overall Length

Conical Tool Company L-103 12.0° HSS Tapered End Mill – 3 Flute x 3/32” Tip x 0.4126” Large Diameter x 3/8” Shank x 3/4” Length of Cut x 2 7/8” Overall Length - The conical tapered end mill was created by us in the 1940’s to reduce significant fixturing time, combine multiple operations into one and create parts that were previously impossible to machine. These tools are a household name and our quality has been tested time and time again. They are the perfect choice for easy and medium to machine materials or applications with minor machining requirements. Our conical tapered high speed steel end mills have many of the same characteristics of our carbide variety, but are available in significantly more configurations.

 

132 Tip Dia x 1 Flute Length - HSS Tapered End Mill - 7 Degree Per Side

1/32″ Tip Dia. x 1″ Flute Length – HSS Tapered End Mill – 7 Degree Per Side

1/32″ Tip Dia. x 1″ Flute Length – HSS Tapered End Mill – 7 Degree Per Side - Overall length 2-3/4″. Shank diameter 3/8″. High speed steel.

 

116 Tip Dia x 1 Flute Length - Cobalt Tapered End Mill - 6 Degree Per Side

1/16″ Tip Dia. x 1″ Flute Length – Cobalt Tapered End Mill – 6 Degree Per Side

1/16″ Tip Dia. x 1″ Flute Length – Cobalt Tapered End Mill – 6 Degree Per Side - Shank diameter 3/8″. Overall length 2-7/8″. Cobalt.

 

116 Tip Dia x 1 Flute Length - Solid Carbide Tapered End Mill - 6 Degree Per Side Ball End

1/16″ Tip Dia. x 1″ Flute Length – Solid Carbide Tapered End Mill – 6 Degree Per Side, Ball End

1/16″ Tip Dia. x 1″ Flute Length – Solid Carbide Tapered End Mill – 6 Degree Per Side, Ball End - 002″. The flute face is also hollow ground and polished to assure free cutting actions with minimum of heat generation. This means longer cutting life with less breakage grinding all flutes are hollow ground with double clearance angles. Tip diameter tolerances are held at +/-. Shank diameter tolerances are -. 001″ per inch of flute length. All tools have end cutting teeth. 0002 to -. Material all tapered end mills are produced from a premium grade of super submicrograin carbide to give you the maximum hardness and toughness. Special grinding procedures and equipment assures a high degree on concentricity between shank and cutting flutes tolerances taper angles constant to +/-. 0005″.

 

Conical Tool Company T-404 200° HSS Tapered End Mill - 4 Flute x 14 Tip x 09779 Large Diameter x 12 Shank x 1 Length of Cut x 3 Overall Length

Conical Tool Company T-404 20.0° HSS Tapered End Mill – 4 Flute x 1/4” Tip x 0.9779” Large Diameter x 1/2” Shank x 1” Length of Cut x 3” Overall Length

Conical Tool Company T-404 20.0° HSS Tapered End Mill – 4 Flute x 1/4” Tip x 0.9779” Large Diameter x 1/2” Shank x 1” Length of Cut x 3” Overall Length - They are the perfect choice for easy and medium to machine materials or applications with minor machining requirements. The conical tapered end mill was created by us in the 1940’s to reduce significant fixturing time, combine multiple operations into one and create parts that were previously impossible to machine. Our conical tapered high speed steel end mills have many of the same characteristics of our carbide variety, but are available in significantly more configurations. These tools are a household name and our quality has been tested time and time again.

 

132 Tip Dia x 12 Flute Length - HSS Tapered End Mill - 5 Degree Per Side

1/32″ Tip Dia. x 1/2″ Flute Length – HSS Tapered End Mill – 5 Degree Per Side

1/32″ Tip Dia. x 1/2″ Flute Length – HSS Tapered End Mill – 5 Degree Per Side - High speed steel. Shank diameter 3/16″. Overall length 2-5/8″.

 

TTC PRODUCTION 3 Flute Tapered End Mill - Tool Material High Vanadium High Speed Steel Flute Length  1 Flute Shape Right Hand Spiral Number of Flutes 3 Overall Length  2-78 Shank Diameter Inch 12

TTC PRODUCTION 3 Flute Tapered End Mill – Tool Material: High Vanadium High Speed Steel Flute Length : 1″ Flute Shape: Right Hand Spiral Number of Flutes: 3 Overall Length : 2-7/8″ Shank Diameter (Inch): 1/2″

TTC PRODUCTION 3 Flute Tapered End Mill – Tool Material: High Vanadium High Speed Steel Flute Length : 1″ Flute Shape: Right Hand Spiral Number of Flutes: 3 Overall Length : 2-7/8″ Shank Diameter (Inch): 1/2″ - For die cast dies and molds. Specially hardened to ensure high hardness, toughness and abrasion resistance. Tip 3/16″. Made of the finest quality steel. Taper per side 15º.

 

REVERSE TAPERED END MILL SOL CARBIDE 1-34 DEGREE PER SIDE 34 SHANK 2FL

REVERSE TAPERED END MILL SOL. CARBIDE 1-3/4 DEGREE PER SIDE 3/4 SHANK ;2FL

REVERSE TAPERED END MILL SOL. CARBIDE 1-3/4 DEGREE PER SIDE 3/4 SHANK ;2FL - Standard square end to create sharp corners in finishing operations. Premium high speed steel improves rigidity, hardness and wear resistance for milling of easy to medium machinability materials. Multi-flute, three and four flute design allows for proper chip evacuation through a variety of materials and applications while maximizing machine performance when possible.

 

Conical Tool Company U-202 300° HSS Tapered End Mill - 4 Flute x 18 Tip x 07024 Large Diameter x 12 Shank x 12 Length of Cut x 2 12 Overall Length

Conical Tool Company U-202 30.0° HSS Tapered End Mill – 4 Flute x 1/8” Tip x 0.7024” Large Diameter x 1/2” Shank x 1/2” Length of Cut x 2 1/2” Overall Length

Conical Tool Company U-202 30.0° HSS Tapered End Mill – 4 Flute x 1/8” Tip x 0.7024” Large Diameter x 1/2” Shank x 1/2” Length of Cut x 2 1/2” Overall Length - . The conical tapered end mill was created by us in the 1940’s to reduce significant fixturing time, combine multiple operations into one and create parts that were previously impossible to machine. They are the perfect choice for easy and medium to machine materials or applications with minor machining requirements. Our conical tapered high speed steel end mills have many of the same characteristics of our carbide variety, but are available in significantly more configurations. These tools are a household name and our quality has been tested time and time again.

 

132 Tip Dia x 1 Flute Length - Solid Carbide Tapered End Mill - 4 Degree Per Side Ball End

1/32″ Tip Dia. x 1″ Flute Length – Solid Carbide Tapered End Mill – 4 Degree Per Side, Ball End

1/32″ Tip Dia. x 1″ Flute Length – Solid Carbide Tapered End Mill – 4 Degree Per Side, Ball End - This means longer cutting life with less breakage grinding all flutes are hollow ground with double clearance angles. 001″ per inch of flute length. Material all tapered end mills are produced from a premium grade of super submicrograin carbide to give you the maximum hardness and toughness. All tools have end cutting teeth. 002″. Tip diameter tolerances are held at +/-. 0002 to -. The flute face is also hollow ground and polished to assure free cutting actions with minimum of heat generation. Special grinding procedures and equipment assures a high degree on concentricity between shank and cutting flutes tolerances taper angles constant to +/-. 0005″. Shank diameter tolerances are -.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.