25 Top Hand Crimps

 

MUZATA Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 11656433276418 Cables CR11

MUZATA Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16″,5/64″,3/32″,7/64″,1/8″ Cables CR11

MUZATA Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16″,5/64″,3/32″,7/64″,1/8″ Cables CR11 - Good precision ferrules and stops fit exactly heavy duty and very sturdy ,well built will last for years. It is good for crimping aluminum and copper ferrules and stops only steel and stainless steel fittings require heavier swagers. This tool is for swaging only, it is made for swaging (crimping) aluminum or copper ferrules it has no cutting ability for any kind of cable if you need something to cut cable, please search b06xcx2ll7 to find the cable cutter. The swaging tool can crimp multiple sizes ferrules including 1/16″,5/64″,3/32″,7/64″,1/8″ for use on the paired cable you also can use the 1/8 for 5/32, there is at least that much effort in the crimp that it should work just fine these sizes refer to the diameter of the cable and the inside diameter the sleeve. It works on single loops and double clips, great swaging the cable railing fittings for cable railings and boat rigging recommended for 1/8″ muzata hand-crimp fittings, please search b01l73unkk to find them.

 

10pc Set - Stainless Steel Type 316 Marine Grade Hand Crimp Deck Toggle and Swage Stud Turnbuckle Fitting for Cable Railing Rigging Hardware Surface Mount Deck Stairs -316 Cable

10pc Set – Stainless Steel Type 316 Marine Grade Hand Crimp Deck Toggle and Swage Stud Turnbuckle Fitting for Cable Railing Rigging Hardware Surface Mount Deck, Stairs -3/16″ Cable

10pc Set – Stainless Steel Type 316 Marine Grade Hand Crimp Deck Toggle and Swage Stud Turnbuckle Fitting for Cable Railing Rigging Hardware Surface Mount Deck, Stairs -3/16″ Cable - Package includes 10pc set (1 turnbuckle, 1 fitting & 4 screws per set). Turnbuckle dimensions eyes for screws 1/4″, overall length closed 7-1/2″. Deck toggle end fitting dimensions eyes for screws 1/4″, overall length 3″. Stainless steel t316 deck toggle turnbuckle & deck toggle hand swage fitting for 3/16″ cable. A swage tool is required for crimping.

 

Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Combination Pack for 18 Cable Railing Kit SystemTension End FittingT316 Marine Grade Stainless Steel 10Pairs CK14Series CA1 CD1 CS1

Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Combination Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 10Pairs CK14,Series CA1 CD1 CS1

Muzata Threaded Hand Crimp Swage Stud and Stemball Swage Combination Pack for 1/8″ Cable Railing Kit System,Tension End Fitting,T316 Marine Grade Stainless Steel 10Pairs CK14,Series CA1 CD1 CS1 - You can diy to install a cable railing systemthe stud end could be adjusted to tighten the wire rope so you don’t need to wast money on turnbuckle or tensionerthese swage studs and stemball swage are fit for 1/8″ cable , they are designed for decades using. This cable railing kit includes 10pcs swage threaded studs and 10pcs stemball swages,can create 10 runs 1/8″ cables railingkit made of t316 marine grade stainless steelthey can be used indoor or outdoor wood & metal post,decking railing,stairs railing handrails. These deck railing hardware require a special hand crimper tool make sure to use muzata customized hand swaging tool for stainless steel 1/8″ fittings(search for muzata cr09) standard crimper tools typically will not put a sufficient crimp on these steel fittings, which could result in cable loosening and slipping out. You could search partnumber to find other muzata cable railing kit accessaries work better with this muzata wr01→1/8 stainless steel cable wire ropemuzata cr09→customized hydraulic crimper super hard mold for steelmuzata cr12→cable cutter up to 5/32″muzata cr13→protector sleevesmuzata cr25→30 degree angle beveled washer. Both terminals and stemballs fitting ends are hidden in the post to keep deck or stair cable railing system prettythe threaded terminal tensions your cable railing with only a few turns of a hex nutthe stemball swage end holds the cable in place on one endperfect for wood steel or aluminum post.

 

10pcs Right Hand Thread Lag Screw Hand-Crimp Swage Stud for 18 Cable Railing Stainless Steel T316 Marine Grade

10pcs Right Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade

10pcs Right Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade - 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. 【Package includes】 10 right hand thread lag screw hand-crimp swage stud. 【material】top quality right hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability. 【Applications】 high-quality stainless steel fittings surface mount a traditional diy cable railing into wood, perfectly planning your own cable railing project, good for indoor or outdoor applications. 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade.

 

Muzata Stemball Swage Stud Dead EndsThreaded Stud Paired with Cable Tensioner for 18 Cable Railing Kit Hand Crimp Stainless Steel T316 Marine Grade30PCS CR24Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,30PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,30PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1 - This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). These t316 marine grade fittings provided a “dead end” for diy 1/8″ stainless steel cable railing project. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. Recommended this cable railing fitting work together with other muzata cable railing accessoriesmuzata is cable railing kit hardware manufacture we provide full solution to customers and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing project cable railing fitting search for muzata ca1,stair angled railing search for muzata cs1 cable railing tool search for muzata ct1 cable railing wire rope search for muzata wp1. Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search for muzata cr09 to purchase muzata custom hand crimper swage tool.

 

VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 316 Cable Railing with Stainless Washers Lot of 10

VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 3/16″ Cable Railing with Stainless Washers (Lot of 10)

VistaView CableTec Stainless Steel Hand-Crimp Stemball Swages for 3/16″ Cable Railing with Stainless Washers (Lot of 10) - These high-quality stainless steel fittings provide a “dead end” for a traditional diy cable railing. T316 marine grade stainless steel for maximum durability, strength and weather protection. Typically paired with a threaded terminal or turnbuckle on opposite end of cable run. Overall length = 1-5/8″, head diameter = 7/16″, drill hole size = 5/16″. Marine-style hand crimper tool required for installation available for rental.

 

Bestbode Right Left Swage Screw Stud Threaded End Fitting Terminal for Wood Post of 18 Cable Railing kit Hand Crimp Stainless Steel T316 Marine Grade 10PACK 5 Pairs BC04

Bestbode Right & Left Swage Screw Stud Threaded End Fitting Terminal for Wood Post of 1/8″ Cable Railing kit Hand Crimp Stainless Steel T316 Marine Grade 10PACK (5 Pairs) BC04

Bestbode Right & Left Swage Screw Stud Threaded End Fitting Terminal for Wood Post of 1/8″ Cable Railing kit Hand Crimp Stainless Steel T316 Marine Grade 10PACK (5 Pairs) BC04 - Swage lag screw for 1/8″ steel cable stainless steel t316 marine grade. Thread length = 1-1/2″, thread diameter = 1/4″, hole size = 1/8″, overall length = 3-5/8″. This cable railing kit include 5pcs right and 5pcs left hand thread lag screws stud which are used to mount 1/8″ cable wire deck railing into wood or or aluminum steel metal post. Perfect for diy cable railing project both for indoor and outdoor applications it’s very easy to make a railing for your garden, stairs, and aisles. T316 marine grade stainless steel for maximum durability, strength, and weather protection.

 

Hand Swager 3 Cavity Crimp Tool For 18 316 14 Stainless Steel Cable Railing Fittings

Hand Swager 3 Cavity Crimp Tool For 1/8″, 3/16″ & 1/4″ Stainless Steel Cable Railing Fittings

Hand Swager 3 Cavity Crimp Tool For 1/8″, 3/16″ & 1/4″ Stainless Steel Cable Railing Fittings - The tool is 30″ long. Crimper is not for crimping oval sleeves, only stainless steel fittings. This tool is very handy to help you finish your cable railing crimping at job sites. Hand crimper (swager) for stainless steel cable railing fittings. 3 cavity for 1/8″, 3/16″, & 1/4″ cable hand crimp fittings.

 

Canare TC-1 Hand Crimp Tool without Die-by Canare

Canare TC-1 Hand Crimp Tool without Die-by Canare

Canare TC-1 Hand Crimp Tool without Die-by Canare - Overall length 10″, length of thread 7-1/2″, thread 1/4″- 20. Type 316 stainless steel hand swage extra long fitting, for 3/16″ cable. High quality, marine grade for maximum corrosion resistance. Each set comes with stud, nut, washer & cap nut. A swage tool is required for crimping.

 

Muzata Sunk Head Stemball Swage Stud Dead Ends for 18 Cable Railing Hand Crimp Stainless Steel T316 10PCS CR51Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Sunk Head Stemball Swage Stud Dead Ends for 1/8″ Cable Railing Hand Crimp Stainless Steel T316 10PCS CR51,Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Sunk Head Stemball Swage Stud Dead Ends for 1/8″ Cable Railing Hand Crimp Stainless Steel T316 10PCS CR51,Series CA1 CD1 CS1 CD2 CS2 CV1 - This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″. These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search muzata ct1 to purchase muzata custom hand crimper swage tool. Muzata is manufacture directly we provide full solution to commit all your need and only offer the highest quality and most affordable cable railing hardware for your deck and balustrade railing projectplease search for these partnumbers to work better with this 1/8 stainless steel cable(muzata wr01)customized hydraulic crimper (muzata cr09),cable cutter(muzata cr12)protector sleeves(muzata cr13)30 degree angle beveled washer(muzata cr25).

 

Lag Screw Stud T316 Stainless Steel Hand Swage Fitting Terminal for 18 Cable Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage 100

Lag Screw Stud T316 Stainless Steel Hand Swage Fitting Terminal for 1/8″ Cable Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage (100)

Lag Screw Stud T316 Stainless Steel Hand Swage Fitting Terminal for 1/8″ Cable Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage (100) - ☛These t316 stainless steel cable railing hardware are perfect for planning your own cable railing project, good for indoor or outdoor applications. ☛T316 marine grade stainless steel for maximum durability, strength, and weather protection. ☛Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade. ☛Overall length = 3-7/8″, thread diameter = 1/4″, pilot hole size = 1/8″. ☛these stainless steel fittings surface mount a traditional diy cable railing into wood.

 

Muzata Stemball Swage Stud Dead EndsThreaded Stud Paired with Cable Tensioner for 18 Cable Railing Kit Hand Crimp Stainless Steel T316 Marine Grade10PCS CR24Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,10PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1

Muzata Stemball Swage Stud Dead Ends,Threaded Stud Paired with Cable Tensioner for 1/8″ Cable Railing Kit, Hand Crimp Stainless Steel T316 Marine Grade,10PCS CR24,Series CA1 CD1 CS1 CD2 CS2 CV1 - This fixed end is typically paired with a threaded terminal or turnbuckle on the opposite end of a cable run recommend to use with muzata threaded terminal stud end (search for muzata cr23) and cable protector sleeve(search for muzata cr13). Hand crimp need a hand crimping tool to crimp on the 1/8″ cable wire rope,recommend to search b07fk7kvvw to purchase muzata custom hand crimper swage tool. These t316 marine grade fittings provided a “dead end” for a diy1/8″ stainless steel cable railing project. Recommended this cable railing fitting work together with other muzata cable railing accessories muzata wr01→1/8″ stainless steel wire rope cable,muzata cr09→customized hydraulic crimper superhard mold for steelmuzata cr12→cable cutter up to 5/32″muzata cr25→30 degree angle beveled washermuzata cr13→cable railing sleeves. These end fittings can be used hidden in all sorts of post, from 4x4s down to 2″pipes make a clean look for wood post or metal post,overall length of stemball = 1-1/2″ head diameter = 25/64″ recommended drill hole diameter = 1/4″.

 

Homend 50 Pack 316 Stainless Steel Hand-Crimp Stemball Swages for 18 Cable Railing Marine Grade

Homend 50 Pack 316 Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing Marine Grade

Homend 50 Pack 316 Stainless Steel Hand-Crimp Stemball Swages for 1/8″ Cable Railing Marine Grade - √ top quality t316 marine grade perfect for fitting 1/8″ stainless steel cable to make a dead end. √ Invisible hidden in the post make a clean look for wood post or metal post. √ Hand-crimp need a hand crimping tool to crimp on the 1/8″cable wire rope. √ Measurements:overall length of stemball is 1-1/2″ head diameter is 25/64″. √ Package included 50 pcs 316 stainless steel hand-crimp stemball swages.

 

Alamic Stemball Swage Fixed Ends Stainless Steel T316 for 18 Cable Railing Deck Railing Hand Railing Wood Metal Post Hand Crimp Stemball Swage - 20 Pack

Alamic Stemball Swage Fixed Ends Stainless Steel T316 for 1/8″ Cable Railing Deck Railing Hand Railing Wood & Metal Post Hand Crimp Stemball Swage – 20 Pack

Alamic Stemball Swage Fixed Ends Stainless Steel T316 for 1/8″ Cable Railing Deck Railing Hand Railing Wood & Metal Post Hand Crimp Stemball Swage – 20 Pack - ✔Invisible, holds the cable in place on one end hidden the end to a cable railing with a very small, low clearance head being the only exposed part helps maintain proper cable railing tension over time. Package included 20x stainless steel hand-crimp stemball swages. ✔marine grade material, made of marine grade 316 stainless steel hand-crimp stemball swages , strong and durable, anti-corrosion, anti-rust. ✔Application, this fixed end apply for wood post, decking railing, stairs railing handrails, etc add a very clean look to your cable railing. ✔Size, fit 1/8″ cable railing overall length of stemball = 1-1/2″, head diameter =3/8″, recommended drill hole diameter = 1/4″.

 

MOLEX 64016-0201 TOOLS HAND CRIMP MOLEX C-GRIDKK SERIES TERMINALS

MOLEX 64016-0201 TOOLS, HAND CRIMP, MOLEX C-GRID,KK SERIES TERMINALS

MOLEX 64016-0201 TOOLS, HAND CRIMP, MOLEX C-GRID,KK SERIES TERMINALS - Molex 64016-0201 tools, hand crimp, molex c-grid,kk series terminals.

 

K41 Positioner for Daniels DMC AFM8WA22 Hand Crimp tool Socket M3902957-35657-35557-354 Crimp Contacts M38999 Series2 2222M22D

K41 Positioner for Daniels DMC AFM8/WA22 Hand Crimp tool Socket M39029/57-356,57-355,57-354 Crimp Contacts M38999 Series2 22#,22M#,22D#

K41 Positioner for Daniels DMC AFM8/WA22 Hand Crimp tool Socket M39029/57-356,57-355,57-354 Crimp Contacts M38999 Series2 22#,22M#,22D# - Gives a standardized and accurate crimp every time suitable for military connectors,heavy duty connectors,electric connectors,terminals,wiring harness manufacturing industry,cable assembly. We make every efforts to provide our customers with tool selection services, product customization services great after-sales services and product maintenance services. Cablegia specializes in designing and manufacturing hand/ pneumatic indents crimping tools, open frame die crimper, positioners, turret heads for wire crimpers. Please note cablegial are authorized store on amazon that can sell cablegial brand products. Purchasing in other stores will not guarantee these services.

 

VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 316 Cable Railing 4-14 Long for Wood Or Metal Posts - Lot of 10

VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 3/16″ Cable Railing (4-1/4″ Long, for Wood Or Metal Posts) – Lot of 10

VistaView CableTec Stainless Steel DIY Hand-Crimp Threaded Tensioner Ends for 3/16″ Cable Railing (4-1/4″ Long, for Wood Or Metal Posts) – Lot of 10 - All-purpose, these threaded tensioners can be used on all sorts of posts, from 4×4’s down to 2″ pipes. High-grade stainless steel, these terminals are made of t316 marine-grade steel that offers maximum durability in harsh climates. Decorative, terminals are primarily housed within end posts with only the stainless nuts and caps exposed on the outside of the post. Unctional, use on one end or both ends of your strands for maximum tensioning ability. Do it yourself, these fittings are used to properly tension cable strands in a diy cable railing project.

 

5Pcs Stainless Steel Protector Sleeves for 18 Wire Rope Cable Railing Deck Wood Posts Cooyeah Stainless T316 Marine Grade DIY Hand Crimp Balustrade Component

5Pcs Stainless Steel Protector Sleeves for 1/8″ Wire Rope Cable Railing Deck Wood Posts, Cooyeah Stainless T316 Marine Grade DIY Hand Crimp Balustrade Component

5Pcs Stainless Steel Protector Sleeves for 1/8″ Wire Rope Cable Railing Deck Wood Posts, Cooyeah Stainless T316 Marine Grade DIY Hand Crimp Balustrade Component - 【Size】 3/4″ in length of the protector sleeve and 1/2″ in flange diameter required 1/4″ in hole diameter. 【High performance】 stainless steel protector sleeves prevents cable from wearing into post, helping to maintain the tension of cable rail over time for preventing wire rope vibration. 【Quality material】 these cable railing protector sleeves are made of t316 marine grade stainless steel which is high tensile strength, weatherproof and can serve for a long time. 【what you get】 5 pieces stainless steel protector sleeves. 【Application】 suitable for 1/8 inch cable railing, widely used in wood or composite posts both indoors and outdoors, perfect for planning your own cable railing project.

 

MOLEX 63819-0900 HAND CRIMP TOOL

MOLEX 63819-0900 HAND CRIMP TOOL

MOLEX 63819-0900 HAND CRIMP TOOL - Price for eachorder unit each 1 svhc to be advised. ✅ They are typically housed entirely within your end posts, which make a super clean look for your project. ✅ cable tensioner made of high strength stainless steel, it is durable, sturdy and not easy to rust. ✅ Comes with threaded stud, washer, hex nut and cap nut for easy and quick installing. ✅ Designed for use with 1/8inch (3175mm) single strand cables, it provides tensioning for your cables.

 

Molex Crimpers  Hand Crimp Tool 24-16 awg 63819-0900

Molex Crimpers / Hand Crimp Tool, 24-16 awg 63819-0900

Molex Crimpers / Hand Crimp Tool, 24-16 awg 63819-0900 - Molex crimpers / hand crimp tool, 24-16 awg.

 

Crimp Tool Hand Molex Micro-Fit 30 43030 43031 44372 45773 30-20AWG Terminals

Crimp Tool, Hand, Molex Micro-Fit 3.0 43030, 43031, 44372 & 45773 30-20AWG Terminals

Crimp Tool, Hand, Molex Micro-Fit 3.0 43030, 43031, 44372 & 45773 30-20AWG Terminals - Molex crimpers / hand crimp tool, 30-20 awg.

 

UGarden Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 18 to 316 Cable -Wire Swaging Tool-10 Ton and Stainless Steel Cable Cutter

UGarden Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ to 3/16″ Cable -Wire Swaging Tool-10 Ton and Stainless Steel Cable Cutter

UGarden Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8″ to 3/16″ Cable -Wire Swaging Tool-10 Ton and Stainless Steel Cable Cutter - Material made of durable materials with high strength and good toughness dies are made of hardened steel with chrome finishvinyl-dipped grip for comfort and easy control cable cutter using sk5 high carbon steel seiko forging, durable. Compatibility crimps 12 awg to 2/0 awg size copper and aluminum wires maximum crimping power10 tons stroke 12mm the hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables cable cutter cuts up to 5/32″ stainless steel cable. What you get includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves. Easy to use on/off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire the c-style head makes side entry easier to change the dies. Size hydraulic hand crimper tool lengthapprox310mm, weightapproxnw175kg gw3kg cable cutter 81 x 28 x 14 inches, weight112 ounces.

 

K41 Positioner for AFM8WA22 Hand Crimp Tool Frame Crimp Contacts M38999 Series2 2222M22D Socket M3902957-35657-35557-354

K41 Positioner for AFM8/WA22 Hand Crimp Tool Frame, Crimp Contacts M38999 Series2 22#,22M#,22D# Socket M39029/57-356,57-355,57-354

K41 Positioner for AFM8/WA22 Hand Crimp Tool Frame, Crimp Contacts M38999 Series2 22#,22M#,22D# Socket M39029/57-356,57-355,57-354 - Gives a standardized and accurate crimp every time suitable for military connectors,heavy duty connectors,electric connectors,terminals,wiring harness manufacturing industry,cable assembly. Cablegia specializes in designing and manufacturing hand/ pneumatic indents crimping tools, open frame die crimper, positioners, turret heads for wire crimpers. We make every efforts to provide our customers with tool selection services, product customization services great after-sales services and product maintenance services.

 

50Pcs Lag Screw Stud Thread Fitting Terminal for 18 Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage Stainless Steel T316 Marine Grade

50Pcs Lag Screw Stud Thread Fitting Terminal for 1/8″ Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage Stainless Steel T316 Marine Grade

50Pcs Lag Screw Stud Thread Fitting Terminal for 1/8″ Cable Railing Rigging Wire Rope Deck Stairs Hand Crimp Swage Stainless Steel T316 Marine Grade - ● these t316 stainless steel cable railing hardware are perfect for planning your own cable railing project, good for indoor or outdoor applications. ● Overall length = 3-7/8″, thread diameter = 1/4″, pilot hole size = 1/8″. ● T316 marine grade stainless steel for maximum durability, strength, and weather protection. ● Swage lag screw for 1/8″ cable hand swage stainless steel t316 marine grade. ● These stainless steel fittings surface mount a traditional diy cable railing into wood.

 

10pcs Left Hand Thread Lag Screw Hand-Crimp Swage Stud for 18 Cable Railing Stainless Steel T316 Marine Grade

10pcs Left Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade

10pcs Left Hand Thread Lag Screw Hand-Crimp Swage Stud for 1/8″ Cable Railing Stainless Steel T316 Marine Grade - 【applications】 high-quality stainless steel fittings surface mount a traditional diy cable railing into wood, perfectly planning your own cable railing project, good for indoor or outdoor applications. 【Size】 overall length = 4″, thread length = 2″, thread diameter = 1/4″, pilot hole size = 1/8″. 【Material】top quality left hand thread lag screw hand-crimp swage stud, made of t316 marine grade stainless steel for maximum durability, strength and weatherability. 【Package includes】 10 left hand thread lag screw hand-crimp swage stud. 【Fitment/compatibility】 fit for 1/8″ cable railing stainless steel t316 marine grade.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.