25 Greatest Tool Companies

 

New Kreg Tool Company - Kreg PRS3400 Precision Router Table Set Up Bars Set of 7 and Kreg PRS3010 True-FLEX Featherboard - Single

New Kreg Tool Company – Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7 and Kreg PRS3010 True-FLEX Featherboard – Single

New Kreg Tool Company – Kreg PRS3400 Precision Router Table Set Up Bars, Set of 7 and Kreg PRS3010 True-FLEX Featherboard – Single - Bars are made from a soft aluminum which is designed to prevent damage to your router bit or saw blade if contact is made during setup. The kreg true-flex feather board gets its name from the careful engineering that went into its design. Bundle includes precision router table set up bars and true-flex featherboard made in usa. Kreg true-flex featherboard comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more. Set up bars come in a portable case with 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″ & 1/2″ bars the step on the top edge of each bar acts as a gauge to test the depth of your completed cuts.

 

New Kreg Tool Company - Kreg KHI-Hinge Concealed Hinge Jig and Kreg KHC-Premium Face Clamp

New Kreg Tool Company – Kreg KHI-Hinge Concealed Hinge Jig and Kreg KHC-Premium Face Clamp

New Kreg Tool Company – Kreg KHI-Hinge Concealed Hinge Jig and Kreg KHC-Premium Face Clamp - Repeatable results with built-in measuring scales reliable drilling with bit guide and stop collar. Unique clamp designed specifically for pocket-screw joinery used primarily for securing individual joints while pocket-screws are being driven the large face of the clamp keeps the joint perfectly flush. Simple to use with any drill-no special tools needed. Bundle includes concealed hinge jig and face clamp made in usa. Make cabinet door installation easy get drill press accuracy with any hand drill accurate hinge positioning with built-in indexing tabs.

 

Goldblatt Tool Company G02383 14-Inch x 14-Inch x 14-Inch U Notch Stainless Steel Trowel

Goldblatt Tool Company G02383 1/4-Inch x 1/4-Inch x 1/4-Inch U Notch Stainless Steel Trowel

Goldblatt Tool Company G02383 1/4-Inch x 1/4-Inch x 1/4-Inch U Notch Stainless Steel Trowel - 11-inch x 4-1/2-inch. Pro-grip handle. Stainless steel blade. Heavy duty aluminum mounting. 1/4-inch x 1/4-inch x 1/4-inch u notch trowel.

 

Wildflower Seed Tool Company Hori-Hori

Wildflower Seed & Tool Company Hori-Hori

Wildflower Seed & Tool Company Hori-Hori - Made of polished stainless steel and razor-sharp, this is the ultimate tool for working in soil. 5″ long. Uses weeding, cutting roots, transplanting, removing plants, sod cutting, dividing perennials and more. It is a trowel, a knife, a saw and a measuring device for planting bulbs. Everyone who owns this tool says “this is my favorite tool” “if i only had one garden tool this would be the one” this is the top-of-the-line hori hori 12.

 

Kraft Tool Company CC022 8x8 SS Walking Groover 78 Bit with EZY-Tilt II Bracket

Kraft Tool Company CC022, 8″x8″ SS Walking Groover 7/8″ Bit with EZY-Tilt II Bracket

Kraft Tool Company CC022, 8″x8″ SS Walking Groover 7/8″ Bit with EZY-Tilt II Bracket - Closed end bit for clean grooves. Walking groover closed end bit made of heavy gauge steel. Includes ezy-tilt ii bracket. Stainless steel walking groover made of heavy gauge stainless steel.

 

Superior Tool Company 03943  Compression Sleeve Puller and Sleeve Remover for 12-Inch Compression Fittings Only

Superior Tool Company 03943 Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only

Superior Tool Company 03943 Compression Sleeve Puller and Sleeve Remover for 1/2-Inch Compression Fittings Only - Utilizing an armless design, it screws directly into the compression nut for fast removal. The heavy duty tool is ideal for a variety of tasks, especially for working on frozen or corroded supply stops. The perfect addition to any toolbox, this sleeve puller is specially designed to quickly and easily remove leaking compression sleeves without damaging the walls.

 

Lenox Tool Company American Saw MFG 72100-CLB7-2360 - Toothed Band Saw Blade - Cobalt Bi-Metal Material 7 ft 9 Long 34 in Wide

Lenox Tool Company & American Saw MFG 72100-CLB7-2360 – Toothed Band Saw Blade – Cobalt Bi-Metal Material, 7 ft 9″ Long, 3/4 in Wide

Lenox Tool Company & American Saw MFG 72100-CLB7-2360 – Toothed Band Saw Blade – Cobalt Bi-Metal Material, 7 ft 9″ Long, 3/4 in Wide - 035 inback material alloy steelusage type stationary band sawmaterial grade m42cutting material cobalt bi-metal. Specslength 7 ft 9″cutting edge type toothedtpi 8 to 12constant or variable pitch variablewidth 3/4 inflexible back flexible backthickness 0.

 

Kreg Tool Company KHI-SLIDE Drawer Slide Jig

Kreg Tool Company KHI-SLIDE Drawer Slide Jig

Kreg Tool Company KHI-SLIDE Drawer Slide Jig - Accurate slide positioning with built-in indexing tabs. Install drawer slides the fast, easy way for drawers that fit perfectly every time and slide smoothly. Reversible to mount slides to cabinet and drawer box. Versatile for use in cabinets, cases, and more. Repeatable results without measuring and marking.

 

KREG KMA3210 Kreg Tool Company 14-Inch Kreg Shelf Pin Jig Drill Bit

KREG KMA3210 Kreg Tool Company 1/4-Inch Kreg Shelf Pin Jig Drill Bit

KREG KMA3210 Kreg Tool Company 1/4-Inch Kreg Shelf Pin Jig Drill Bit - Includes drill bit, stop collar, and allen wrench. A very fast and simple technique to build shelving whether you are a diy’er or a pro. Hex shank drill bit that is compatible with the kreg quik-adapt.

 

Kreg K4MS Jig Master System and  Kreg Tool Company KTC55 System Organizer

Kreg K4MS Jig Master System and Kreg Tool Company KTC55 System Organizer

Kreg K4MS Jig Master System and Kreg Tool Company KTC55 System Organizer - Versatile storage bays. Custom tool inserts. Removable drill guide for use with bench top and portable bases. Patented 3-hole drill guide allows you to make perfectly placed pocket-holes in a wide variety of material widths and thicknesses.

 

Collins Tool Company Stair Tread Template Set

Collins Tool Company Stair Tread Template Set

Collins Tool Company Stair Tread Template Set - A real headache saver. Building or rehabbing stairways this tread template set from the collins tool company will help you lay out stair treads, risers, and shelving to perfection. Portable and simple. The increased accuracy and savings in time will pay for the templates before you finish your next set of stairs. Easy to handle and adjust for the correct angles.

 

F&D Tool Company 26301 Single Angle Chamfering Cutters 45 Cham Angle 12 Cutter Diameter 18 Face Width 38 Shank Diameter 218 Overall Length 8 Number of Teeth

F&D Tool Company 26301 Single Angle Chamfering Cutters, 45 Cham Angle, 1/2″ Cutter Diameter, 1/8″ Face Width, 3/8″ Shank Diameter, 2/18″ Overall Length, 8 Number of Teeth

F&D Tool Company 26301 Single Angle Chamfering Cutters, 45 Cham Angle, 1/2″ Cutter Diameter, 1/8″ Face Width, 3/8″ Shank Diameter, 2/18″ Overall Length, 8 Number of Teeth - Single angle chamfering cutter. Furnished in 45 degree and 60 degree. Cham angle 45, cutter dia 1/2, face width 1/8, shank dia 3/8, overall length 2/18 no of teeth 8. Made in usa.

 

Kreg Tool Company KHI-BIT 35mm Concealed Hinge Jig Bit

Kreg Tool Company KHI-BIT 35mm Concealed Hinge Jig Bit

Kreg Tool Company KHI-BIT 35mm Concealed Hinge Jig Bit - Works with all 35mm concealed hinges. Bore clean, perfect holes for concealed door hinges. Spurs create clean hole edges without tearout. Shoulder ensures accurate stop-collar positioning (stop collar sold separately with concealed hinge jig). Shank fits perfectly in concealed hinge jig drill guide.

 

Barwalt Tool Company KN-1 Ultralight Knee Pad by Barwalt Tool Company

Barwalt Tool Company KN-1 Ultralight Knee Pad by Barwalt Tool Company

Barwalt Tool Company KN-1 Ultralight Knee Pad by Barwalt Tool Company - 20991 replacement straps (4 per set), no. Barwalt 20010 kn-1 ultralight soft shell knee pads, these knee pads are famous the world over for starting the comfort revolution the folding accordion top allows for comfort while standing and the knee pads are totally rebuildable with replacement straps, buttons and liners. 20993 replacement buttons (8 per set). At only 11 oz. These knee pads offer excellent grip, maximum comfort and security with a tough, yet flexible, nonskid outer shell. 20992 replacement liners (2 per set), no. Replacement parts, no. Each, these are the no stress knee pads you’ve been looking for.

 

Superior Tool Company 03932 Drum Trap Wrench with Wrench for Removing and Installing Threaded Plugs

Superior Tool Company 03932 Drum Trap Wrench with Wrench for Removing and Installing Threaded Plugs

Superior Tool Company 03932 Drum Trap Wrench with Wrench for Removing and Installing Threaded Plugs - Superior tool 3932. Removes/installs threaded plugs in cleanouts. Drum tap wrench. Specialty plumbing tool.

 

F&D Tool Company 56006 Slitting and Slotting Saw Arbors 1 Hole Diameter 34 Shank Diameter 1-12 Arbor Diameter 3-34 Overall

F&D Tool Company 56006 Slitting and Slotting Saw Arbors, 1″ Hole Diameter, 3/4″ Shank Diameter, 1-1/2″ Arbor Diameter, 3-3/4″ Overall

F&D Tool Company 56006 Slitting and Slotting Saw Arbors, 1″ Hole Diameter, 3/4″ Shank Diameter, 1-1/2″ Arbor Diameter, 3-3/4″ Overall - Hole dia 1, shank dia 3/4, arbor dia 1-1/2, overall 3-3/4. Slitting and slotting saw arbors. Made in usa. Standard arbor tolerance is 002″ premium arbor tolerance is 0004″.

 

Kreg Tool Company KTC55 System Organizer

Kreg Tool Company KTC55 System Organizer

Kreg Tool Company KTC55 System Organizer - It’s easy to keep track of everything stored in the system organizer thanks to a transparent lid. The system organizer has a custom-fitted insert to hold the following items 1 kreg jig (k5, k4, or k3 model) kreg jig k5 storage wings 4 standard stepped drill bits 7 standard 6″ or 3″ square-drive bits 3 stop-collar hex wrenches micro-pocket drill guide block 2 micro-pocket drill bits kreg jig hd (heavy-duty) kreg jig hd drill bit kreg jig hd square-drive bit kreg clamps up to 6 kreg screw 100-count containers in addition, a portion of the organizer’s tray can be removed for storage of other items such as up to 6 kreg screw 500-count containers additional clamps kreg shelf-pin jig compact drills and drivers it’s easy to keep track of everything stored in the system organizer, too, thanks to a transparent lid. The all-new system organizer is the perfect place to store and organize all of your kreg joinery system parts, your kreg jig, kreg clamps, kreg screws, drill and driver bits, and more. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the organizer easy to carry. A portion of the organizer’s tray can be removed for storage of other items such as the kreg shelf pin jig, compact drills and drivers, and more. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the organizer easier to carry and take your kreg tools on the go.

 

STOCKTON TOOL COMPANY 10-Piece Hex Key T-Handle Set - Metric

STOCKTON TOOL COMPANY 10-Piece Hex Key T-Handle Set – Metric

STOCKTON TOOL COMPANY 10-Piece Hex Key T-Handle Set – Metric - Made in usa. Mill diameter 3/8, shank diameter 3/8, flute length 2 1/2, overall length 4 1/4, number of flutes 4. Multiple flute endmill, single end, extra long, high speed steel. Regularly furnished with right hand cut and right hand spiral.

 

Superior Tool Company 37115  PVC Pipe Cutter - Heavy Duty Cutter up to 2-12-Inch OD

Superior Tool Company 37115 PVC Pipe Cutter – Heavy Duty Cutter up to 2-1/2-Inch O.D.

Superior Tool Company 37115 PVC Pipe Cutter – Heavy Duty Cutter up to 2-1/2-Inch O.D. - The wide hooked jaw holds pipe securely for safer, cleaner cuts and is easier & faster than a hacksaw. Extra-large capacity cuts up to 2″ schedule 40 pvc and polyethylene pipe (up to 21/2″ o. D. Heavy-duty cutter’s ratchet mechanism maximizes cutting. ). Replacement blade available.

 

Goldblatt Tool Company G02102 10-Inch Contour Gauge

Goldblatt Tool Company G02102 10-Inch Contour Gauge

Goldblatt Tool Company G02102 10-Inch Contour Gauge - Bundle includes precision router table set up bars and true-flex featherboard made in usa. Integrated ruler. The kreg true-flex feather board gets its name from the careful engineering that went into its design. Bars are made from a soft aluminum which is designed to prevent damage to your router bit or saw blade if contact is made during setup. Kreg true-flex featherboard comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.

 

New Kreg Tool Company - Kreg Tool Company KJHD Jig HD and Kreg KHC-PREMIUM Face Clamp

New Kreg Tool Company – Kreg Tool Company KJHD Jig HD and Kreg KHC-PREMIUM Face Clamp

New Kreg Tool Company – Kreg Tool Company KJHD Jig HD and Kreg KHC-PREMIUM Face Clamp - Designed with the same tried-and-true efficient design and hardened steel drill guidesthe kreg jig hd is optimized for working with 2×4’s and larger stockscrew specification-washerhead, no14, 2-1/2-inch, weather-coated, self-tapping tip. The large face of the clamp keeps the joint perfectly flush. Bundle includes kreg tool company kjhd jig hd and kreg khc-premium face clamp made in usa. 50-percent stronger than standard pocket-holes for use with 1-1/2-inch materials and up works in the kreg jig and kreg jig master system 1/2-inch hd drill bit, stop block, 6-inch driver, stop collar included. Unique clamp designed specifically for pocket-screw joinery used primarily for securing individual joints while pocket-screws are being driven.

 

Kreg Tool Company - Kreg KMA2685 Circular Saw Guide and Kreg KMA2600 Square-Cut

Kreg Tool Company – Kreg KMA2685 Circular Saw Guide and Kreg KMA2600 Square-Cut

Kreg Tool Company – Kreg KMA2685 Circular Saw Guide and Kreg KMA2600 Square-Cut - Eliminate need for marking, measuring, and layout lines take your saw to the material instead of having to take your material to the saw. Low-profile design won’t interfere with saw built-in roof pitch scale for cutting siding. Cut multiple pieces to the same size with just one setup use the oversize edge guide for precise control throughout the cut make rip cuts and crosscuts up to 24″ wide. Bundle includes circular saw guide and square-cut made in usa. Switch back and forth between any circular or jig saw adjustable arm requires no trimming supports work pieces up to 12-inch wide.

 

Kreg Tool Company KSS-L Hardware Container Large

Kreg Tool Company KSS-L Hardware Container, Large

Kreg Tool Company KSS-L Hardware Container, Large - Store and organize kreg screws and other hardware in the shop and on the go . Dry-erase surface for easy updating of labels. Fits into the kreg screw organizer, system organizer, and large hardware container. Locking lid with a write-on label. Stackable, transparent body.

 

F&D Tool Company 18383-F912 Multiple Flute End Mill Single End Extra Long High Speed Steel 38 Mill Diameter 38 Shank Diameter 25 Flute Length 425 Overall Length 4 Number of Flutes

F&D Tool Company 18383-F912 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 3/8″ Mill Diameter, 3/8″ Shank Diameter, 2.5″ Flute Length, 4.25″ Overall Length, 4 Number of Flutes

F&D Tool Company 18383-F912 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 3/8″ Mill Diameter, 3/8″ Shank Diameter, 2.5″ Flute Length, 4.25″ Overall Length, 4 Number of Flutes - Made in usa. Regularly furnished with right hand cut and right hand spiral. Multiple flute endmill, single end, extra long, high speed steel. Mill diameter 3/8, shank diameter 3/8, flute length 2 1/2, overall length 4 1/4, number of flutes 4.

 

F&D Tool Company 18381-F908 Multiple Flute End Mill Single End Extra Long High Speed Steel 14 Mill Diameter 38 Shank Diameter 175 Flute Length 35 Overall Length 4 Number of Flutes

F&D Tool Company 18381-F908 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 1/4″ Mill Diameter, 3/8″ Shank Diameter, 1.75″ Flute Length, 3.5″ Overall Length, 4 Number of Flutes

F&D Tool Company 18381-F908 Multiple Flute End Mill, Single End, Extra Long, High Speed Steel, 1/4″ Mill Diameter, 3/8″ Shank Diameter, 1.75″ Flute Length, 3.5″ Overall Length, 4 Number of Flutes - Multiple flute endmill, single end, extra long, high speed steel. Mill diameter 1/4, shank diameter 3/8, flute length 1 3/4, overall length 3 1/2, number of flutes 4. Made in usa. Regularly furnished with right hand cut and right hand spiral.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.