24 Coolest Drill Diameters in 2020

 

Cle-Line C22721 General Purpose Jobber Length Drill High Speed Steel Steam Oxide Finish Straight Shank 118-Degree Radial Point 14 Drill Diameter Pack of 12 #ad

Cle-Line C22721 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 1/4″ Drill Diameter (Pack of 12)

Cle-Line C22721 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 1/4″ Drill Diameter (Pack of 12) #ad - Hss substrate with general-purpose geometry. Black oxide finish for increased wear resistance and improved lubricity. 118 degree radial point. Available with 3/8″ reduced shanks.

 

Cle-Line C20718 Glass and Tile Carbide-Tipped Specialty Drill High Speed Steel with Carbide Tip Bright Finish Straight Shank 60-Degree Radial Point 18 Drill Diameter #ad

Cle-Line C20718 Glass and Tile Carbide-Tipped Specialty Drill, High Speed Steel with Carbide Tip, Bright Finish, Straight Shank, 60-Degree Radial Point, 1/8″ Drill Diameter

Cle-Line C20718 Glass and Tile Carbide-Tipped Specialty Drill, High Speed Steel with Carbide Tip, Bright Finish, Straight Shank, 60-Degree Radial Point, 1/8″ Drill Diameter #ad - . Spear point produces clean, smooth finish. Cle-line 1822 glass and tile carbide-tipped specialty drill, high speed steel w/ carbide tip, bright finish, straight shank, 60° radial point, 1/8″ (pack of 1). Run at 25 sfm with moderate consistant feed. Designed to drill into glass, mirror, china and ceramic tile.

 

Cle-Line C20758 Silver and Deming Reduced Shank Drill High Speed Steel Steam Oxide Finish Reduced Shank 118-Degree Radial Point 1 116 Drill Diameter #ad

Cle-Line C20758 Silver and Deming Reduced Shank Drill, High Speed Steel, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 1 1/16″ Drill Diameter

Cle-Line C20758 Silver and Deming Reduced Shank Drill, High Speed Steel, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 1 1/16″ Drill Diameter #ad - Cle-line 1813 silver & deming reduced shank drill, high speed steel, steam oxide finish, reduced shank, 118° radial point, 1 1/16″ (pack of 1). 118 degree radial point. Round 1/2″ reduced shank. Black oxide finish.

 

Magnate 8624 Adjustable Face Frame Counterbore - 38 Outside Diameter 0136 Drill Diameter #ad

Magnate 8624 Adjustable Face Frame Counterbore – 3/8″ Outside Diameter; 0.136″ Drill Diameter

Magnate 8624 Adjustable Face Frame Counterbore – 3/8″ Outside Diameter; 0.136″ Drill Diameter #ad - 9/32″ carbide height 4″ overall length. Carbide tipped 3/8″ outside diameter 0136″ drill diameter 3/8″ shank diameter.

 

Mungo MN Nylon Plug Anchor 1-316 inch length 14 inch plug and drill diameter Box of 100 Premium Grade Anchor for Drywall Brick Concrete and Stone #ad

Mungo MN Nylon Plug Anchor, 1-3/16 inch length, 1/4 inch plug and drill diameter, Box of 100, Premium Grade Anchor for Drywall, Brick, Concrete and Stone

Mungo MN Nylon Plug Anchor, 1-3/16 inch length, 1/4 inch plug and drill diameter, Box of 100, Premium Grade Anchor for Drywall, Brick, Concrete and Stone #ad - 1-3/16 inch length, 1/4 inch plug and drill diameter, 1-9/16 inch drilling depth. Appropriate for wood, particle board, and metric screws indoor and outdoor applications. Load 134 lbs-concrete, 89 lbs-brick, 13 lbs lightweight concrete. -40 degree fahrenheit to 212 degree fahrenheit temperature range. Use with drywall, concrete, brick, and stone.

 

Cle-Line C22816 General Purpose Jobber Length Drill High Speed Steel Steam Oxide Finish Straight Shank 118-Degree Radial Point 215 mm Drill Diameter Pack of 12 #ad

Cle-Line C22816 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 2.15 mm Drill Diameter (Pack of 12)

Cle-Line C22816 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 2.15 mm Drill Diameter (Pack of 12) #ad - 118 degree radial point. Hss substrate with general-purpose geometry. Available with 3/8″ reduced shanks. Black oxide finish for increased wear resistance and improved lubricity.

 

Cle-Line C20946 Carbide-Tipped Masonry Drill High Speed Steel with Carbide Tip Steam Oxide Finish Reduced Shank 118-Degree Radial Point 58 Drill Diameter #ad

Cle-Line C20946 Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 5/8″ Drill Diameter

Cle-Line C20946 Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 5/8″ Drill Diameter #ad - Shank reduced to fit 1/2″ drill. Regular helix for easy dust removal and more steel support for the tip. Conforms to ansi specification b21215-194. Oversize carbide tip provides clearance for toggle bolts, anchor screws and expansion drills. Recommended for use in sandstone and green concrete.

 

Screw Anchor Lead Alloy Sleeve and Zinc Alloy Expander Internally Threaded Meets GSA Meets FF-S-328 Group 1 Type 1 Class 1 12 Drill Diameter 78 Minimum Embedment Depth 14-20 Threads Pack of 100 #ad

Screw Anchor, Lead Alloy Sleeve and Zinc Alloy Expander, Internally Threaded, Meets GSA Meets FF-S-328 Group 1 Type 1 Class 1, 1/2″ Drill Diameter, 7/8″ Minimum Embedment Depth, 1/4″-20 Threads (Pack of 100)

Screw Anchor, Lead Alloy Sleeve and Zinc Alloy Expander, Internally Threaded, Meets GSA Meets FF-S-328 Group 1 Type 1 Class 1, 1/2″ Drill Diameter, 7/8″ Minimum Embedment Depth, 1/4″-20 Threads (Pack of 100) #ad - Screw anchor provides a secure hold in most materials including solid concrete, hollow c-90 concrete block, and solid red brick. Tensile strength is 2,340 lb in 4,000-psi concrete. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Meets fed spec gsa ffs-325 group ii type 2 class 2 style 2 standards. Anchor has a corrosion-resistant zinc alloy sleeve and lead alloy conical expander that expands the surrounding sleeve when a threaded machine screw is inserted, gripping the mounting material and holding the anchor in place.

 

22mm Borer Drill Diameter Hinge Boring Drill Bit Woodworkers Wood Hole Saw #ad

22mm Borer Drill Diameter Hinge Boring Drill Bit Woodworkers Wood Hole Saw

22mm Borer Drill Diameter Hinge Boring Drill Bit Woodworkers Wood Hole Saw #ad - It is far safer and more accurate to use this drill bit in a drill press. . Carbide tip is specially designed to through hole cleanly in end grain and thin stock, great for boring concealed hinges and door clocks. Precision ground for heavy use and easily resharpened, they can enlarge existing holes with ease and can bore any arc of a circle.

 

Cle-Line C30507 Cobalt Left-Hand Mechanics Length Drill Cobalt Gold Oxide Finish Straight Shank 135-Degree Split Point 764 Drill Diameter Pack of 12 #ad

Cle-Line C30507 Cobalt Left-Hand Mechanics Length Drill, Cobalt, Gold Oxide Finish, Straight Shank, 135-Degree Split Point, 7/64″ Drill Diameter (Pack of 12)

Cle-Line C30507 Cobalt Left-Hand Mechanics Length Drill, Cobalt, Gold Oxide Finish, Straight Shank, 135-Degree Split Point, 7/64″ Drill Diameter (Pack of 12) #ad - . Industrial-grade cobalt hss substrate for use in hard metal, stainless steel, titanium and inconel.

 

Pack of 10 Micro HSS Twist Drilling Auger bit for Electrical Drill Diameter 1mm---- Total Length 40mm #ad

Pack of 10 Micro HSS Twist Drilling Auger bit for Electrical Drill (Diameter: 1mm—- Total Length: 40mm)

Pack of 10 Micro HSS Twist Drilling Auger bit for Electrical Drill (Diameter: 1mm—- Total Length: 40mm) #ad - Sharp and twisted drill will make the drilling be more easy and effortless. Product name twist drill bit. Suitable for wood, aluminum, plastic, etc. High speed steel (hss) made, stable performance and durable. Straight shank design is more suitable for many electric drills and drilling machines.

 

Micro 100 SPD-250-100 100° Included Drill Point Spotting and Centering Drill 14 Drill Diameter 34 Flute Length 2-12 Overall Length Solid Carbide Tool #ad

Micro 100 SPD-250-100 100° Included Drill Point Spotting and Centering Drill, 1/4″ Drill Diameter, 3/4″ Flute Length, 2-1/2″ Overall Length, Solid Carbide Tool

Micro 100 SPD-250-100 100° Included Drill Point Spotting and Centering Drill, 1/4″ Drill Diameter, 3/4″ Flute Length, 2-1/2″ Overall Length, Solid Carbide Tool #ad - This tool may also be used for chamfering or deburring. Best suited for most materials with the correct selection of the drill point. Each size may be used on a wide range of hole diameters. Their substrate is in a class of its own, resulting from an exclusive treating process that allows for increased speeds and feeds and extended tool life. Designed and engineered for when tight tolerance hole locations are required. Spot drilling is required to prevent the drill from walking. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Spotting drills improve the accuracy of the secondary drilled hole. Micro 100, spd-250-100, spotting and centering, solid carbide drill. Optimized rake and clearance angles that produce, high speed and high material removal rates while providing improved surface finishes in most routing applications. The typical diameter of a spot drilled hole is 50-75% of the secondary final drill diameter. Available with four different drill points. For over 45 years, micro 100 is a known industry leader and internationally acclaimed. Selection of the correct drill point(s) is in relationship to the material(s) being drilled.

 

Cle-Line C21048 SDS-Plus Carbide-Tipped Masonry Drill High Speed Steel with Carbide Tip Steam Oxide Finish Reduced Shank 118-Degree Radial Point 34 Drill Diameter #ad

Cle-Line C21048 SDS-Plus Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 3/4″ Drill Diameter

Cle-Line C21048 SDS-Plus Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 3/4″ Drill Diameter #ad - Special flute design reduces jamming and tip breakage. Specifically designed for use with all sds high impact rotary hammers. Specially designed point allows faster penetration. Cle-line 1821 sds-plus carbide-tipped masonary drill, high speed steel w/ carbide tip, steam oxide finish, reduced shank, 118° radial point, 3/4″ (pack of 1).

 

Cle-Line C20712 SDS-Plus Carbide-Tipped Masonry Drill High Speed Steel with Carbide Tip Steam Oxide Finish Reduced Shank 118-Degree Radial Point 316 Drill Diameter #ad

Cle-Line C20712 SDS-Plus Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 3/16″ Drill Diameter

Cle-Line C20712 SDS-Plus Carbide-Tipped Masonry Drill, High Speed Steel with Carbide Tip, Steam Oxide Finish, Reduced Shank, 118-Degree Radial Point, 3/16″ Drill Diameter #ad - Cle-line 1821 sds-plus carbide-tipped masonary drill, high speed steel w/ carbide tip, steam oxide finish, reduced shank, 118° radial point, 3/16″ (pack of 1). Specially designed point allows faster penetration. Special flute design reduces jamming and tip breakagespecial flute design reduces jamming and tip breakage. Specifically designed for use with all sds high impact rotary hammers.

 

Cle-Line C23623 Aircraft Extension Drill High Speed Steel Steam Oxide Finish Straight Shank 135-Degree Split Point 332 Drill Diameter Pack of 12 #ad

Cle-Line C23623 Aircraft Extension Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 135-Degree Split Point, 3/32″ Drill Diameter (Pack of 12)

Cle-Line C23623 Aircraft Extension Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 135-Degree Split Point, 3/32″ Drill Diameter (Pack of 12) #ad - Available in 6″ and 12″ overall lengths. Black oxide finish for increased wear resistance and improved lubricity. Hss substrate. 135 degree split point for faster drill penetration.

 

Mungo 1000080 MN Nylon Plug Anchor 1-916 Length 516 Plug Drill Diameter Premium Grade Anchor for Drywall Brick Concrete Stone Box of 100 #ad

Mungo 1000080 MN Nylon Plug Anchor, 1-9/16″ Length, 5/16″ Plug & Drill Diameter, Premium Grade Anchor for Drywall, Brick, Concrete & Stone, Box of 100

Mungo 1000080 MN Nylon Plug Anchor, 1-9/16″ Length, 5/16″ Plug & Drill Diameter, Premium Grade Anchor for Drywall, Brick, Concrete & Stone, Box of 100 #ad - 1-9/16 inch length, 5/16 inch plug and drill diameter, 2-3/16 inch drilling depth. Appropriate for wood, particle board and metric screws, indoor and outdoor applications. Use with drywall, concrete, brick and stone. 40 degree fahrenheit to 212 degree fahrenheit temperature range. Load 191 lbs-concrete, 134 lbs-brick, 20 lbs lightweight concrete.

 

Cle-Line C22679 General Purpose Jobber Length Drill High Speed Steel Steam Oxide Finish Straight Shank 118-Degree Radial Point 18 Drill Diameter Pack of 12 #ad

Cle-Line C22679 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 1/8″ Drill Diameter (Pack of 12)

Cle-Line C22679 General Purpose Jobber Length Drill, High Speed Steel, Steam Oxide Finish, Straight Shank, 118-Degree Radial Point, 1/8″ Drill Diameter (Pack of 12) #ad - Available with 3/8” reduced shanks. 118 degree radial point. Cle-line 1899 general purpose jobber length drill, high speed steel, steam oxide finish, straight shank, 118° radial point, 1/8″ (pack of 12). For general-purpose drilling and maintenance applications.

 

Cle-Line C17109 Power Wood Bits Specialty Drill High Speed Steel Steam Oxide Finish Hex Shank 1316 Drill Diameter #ad

Cle-Line C17109 Power Wood Bits Specialty Drill, High Speed Steel, Steam Oxide Finish, Hex Shank, 13/16″ Drill Diameter

Cle-Line C17109 Power Wood Bits Specialty Drill, High Speed Steel, Steam Oxide Finish, Hex Shank, 13/16″ Drill Diameter #ad - Tool steel propeller shaped cutter head. Cle-line 1823 power wood bits specialty drill, high speed steel, steam oxide finish, hex shank shank, ° point, 13/16″ (pack of 1). Easy to resharpen. Unique turbo twist clears holes of chips.

 

Cle-Line C18630 Heavy Duty Parabolic Jobber Length Drill High Speed Steel Tin Finish Straight Shank 135-Degree Split Point 116 Drill Diameter Pack of 12 #ad

Cle-Line C18630 Heavy Duty Parabolic Jobber Length Drill, High Speed Steel, Tin Finish, Straight Shank, 135-Degree Split Point, 1/16″ Drill Diameter (Pack of 12)

Cle-Line C18630 Heavy Duty Parabolic Jobber Length Drill, High Speed Steel, Tin Finish, Straight Shank, 135-Degree Split Point, 1/16″ Drill Diameter (Pack of 12) #ad - For a wide range of material
applications. Faster penetration rates than conventional hss heavy duty jobber drills. Hss substrate. Tin coated finish for longer tool life. Optimized web and point geometry to maximize penetration.

 

Cle-Line C20909 14 hex shank drill High Speed Steel Bright Finish Hex Shank 135-Degree Split Point 14 Drill Diameter Pack of 6 #ad

Cle-Line C20909 1/4 hex shank drill, High Speed Steel, Bright Finish, Hex Shank, 135-Degree Split Point, 1/4″ Drill Diameter (Pack of 6)

Cle-Line C20909 1/4 hex shank drill, High Speed Steel, Bright Finish, Hex Shank, 135-Degree Split Point, 1/4″ Drill Diameter (Pack of 6) #ad - Cle-line 1816 1/4 hex shank drill, high speed steel, bright finish, hex shank shank, 135° split point, 1/4″ (pack of 6). Bright finish. 135 degree split point. Hss substrate.

 

Richards Micro Tool 601-0002 Center Drill 2 Flute Double-End Carbide 2 x 60 Degree 0078 Diameter 200 OAL 0078 Flute Length #ad

Richards Micro Tool 601-0002 Center Drill, 2 Flute, Double-End, Carbide, #2 x 60 Degree, 0.078″ Diameter, 2.00″ OAL, 0.078″ Flute Length

Richards Micro Tool 601-0002 Center Drill, 2 Flute, Double-End, Carbide, #2 x 60 Degree, 0.078″ Diameter, 2.00″ OAL, 0.078″ Flute Length #ad - Drill length 0078, flute length 0078. Drill diameter 0078, body diameter 01875. Shank diameter 01875. Number of flutes 2. Angled edge.

 

ZMZ Set Hole Saw Carpenter Diameter Wood Cutting Hinge Boring Drill Bit Tool 60mm #ad

ZMZ Set Hole Saw Carpenter Diameter Wood Cutting Hinge Boring Drill Bit Tool 60mm

ZMZ Set Hole Saw Carpenter Diameter Wood Cutting Hinge Boring Drill Bit Tool 60mm #ad - Boring concealed hinges and door clocks,perfect for wood hole cutting. Different various of professional forstner drill bit ,meet your different needs. It is far safer and more accurate to use this drill bit in a drill press. Carbide tip is specially designed to through hole cleanly in end grain and thin stock, great for boring concealed hinges and door clocks. Precision ground for heavy use and easily resharpened, they can enlarge existing holes with ease and can bore any arc of a circle.

 

Cle-Line C22996 General Purpose Jobber Length Drill High Speed Steel Bright Finish Straight Shank 118-Degree Radial Point 564 Drill Diameter Pack of 12 #ad

Cle-Line C22996 General Purpose Jobber Length Drill, High Speed Steel, Bright Finish, Straight Shank, 118-Degree Radial Point, 5/64″ Drill Diameter (Pack of 12)

Cle-Line C22996 General Purpose Jobber Length Drill, High Speed Steel, Bright Finish, Straight Shank, 118-Degree Radial Point, 5/64″ Drill Diameter (Pack of 12) #ad - Available with 3/8″ reduced shanks. Hss substrate with general-purpose geometry. 118 degree radial point. Bright finish for nonferrous and low tensile steel applications.

 

Cle-Line C20510 14 hex shank drill High Speed Steel Bright Finish Hex Shank 135-Degree Split Point 116 Drill Diameter Pack of 12 #ad

Cle-Line C20510 1/4 hex shank drill, High Speed Steel, Bright Finish, Hex Shank, 135-Degree Split Point, 1/16″ Drill Diameter (Pack of 12)

Cle-Line C20510 1/4 hex shank drill, High Speed Steel, Bright Finish, Hex Shank, 135-Degree Split Point, 1/16″ Drill Diameter (Pack of 12) #ad - Cle-line 1816 1/4 hex shank drill, high speed steel, bright finish, hex shank shank, 135° split point, 1/16″ (pack of 12). Bright finish. Hss substrate. 135 degree split point.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.