24 Best Amana Tool Router Bits

 

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set 14-Inch Shank 2-Piece

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece

Amana Tool 49643 Bead Stile and Rail 2-Flute Carbide Tipped Router Bit Set, 1/4-Inch Shank, 2-Piece - Carbide tipped, industrial quality bead stile and rail set. Includes no49640 bead stile (1-1/8 diameter by 3/8-inch cutting height by 1/4-inch radius with lower ball bearing). Includes no49642 bead rail (1-1/4 diameter by 5/16-inch cutting height by 1/4-inch radius with upper ball bearing). 1/4-inch shank, 2 flute.

 

Amana Tool 53600 Quadraset Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide 12-Inch Shank

Amana Tool 53600 Quadraset Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank

Amana Tool 53600 Quadraset Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - . Tongue & groove can also be achieved with proper set-up. 1mm). Amana 53600 specifications depth of cut 1/2″ diameter 1-7/8″ overall length 3″ kerf 1/8″, 23/32″ wings 2 shank 1/2″ amana 53600 features the ‘quadraset’ with its four cutters enables you to cut grooves and dados from 1/8″ through 23/32″ (3. 0mm) in increments of 1/32″ (0. Complete with four cutters (1/8″, 5/32″, 3/16″, 1/4″), arbor, ball bearing guide, spacers, and shims. 2mm-18. Fully diagrammed instructions included for both fractional and metric sizes.

 

Amana Tool 45786 Bottom Round 2-Flute Carbide Tipped Router Bit 38-Inch Shank

Amana Tool 45786 Bottom Round 2-Flute Carbide Tipped Router Bit, 3/8-Inch Shank

Amana Tool 45786 Bottom Round 2-Flute Carbide Tipped Router Bit, 3/8-Inch Shank - Cutting diameter 3/8-inch. 7/16-inch cutting height. 3/8-inch shank, 2 flute. Carbide tipped, industrial quality. 3/16-inch radius.

 

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide 12-Inch Shank

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank

Amana Tool 54135 Classical Cove and Bead 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - With the optional 3/8″ pilot bearing, the bit produces a fillet at the base of the bead. Use in either handheld or table-mounted router. Amana 54135 specifications diameter 2″ radius 3/8″ carbide height 1″ shank 1/2″ length 2-3/4″amana 54135 features the positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing. Largest diameter bits should be run at reduced speed.

 

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54297 Base Moulding Ogee Edge Detail 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Cutting diameter 1-7/16-inch. 1/2-inch shank, 2-flute. 1/4-inch shank, 2-flute. 19/32-inch cutting height. Carbide tipped, industrial quality.

 

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54182 Wavy Edge 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 11/16-inch cutting height. 3/16-inch radius. Carbide tipped, industrial quality. Cutting diameter 1-1/4-inch. 1/2-inch shank, 2-flute.

 

Amana Tool 53620 Duo-Set Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide 12-Inch Shank

Amana Tool 53620 Duo-Set Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank

Amana Tool 53620 Duo-Set Adjustable Slotting Assembly 2-Wing Carbide Tipped Router Bit with Ball Bearing Guide, 1/2-Inch Shank - Carbide tipped, industrial quality. Cutting diameter 1-31/32-inch. 1/2-inch shank, 2-wing. 1/8-inch to 3/16-inch cutting height.

 

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 56100 Beading Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - . Quarter-round profiles are formed by this bit as it grooves, one on each side of a flat. The scale and depth of the beading profile distinguishes it from the roundover above. Used with a fence or edge guide, this beading bit can be used as an edge former.

 

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit 1-18-Inch Diameter

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter

Amana Tool 48100 Special Amerock Hinge 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter - For the best results use in table-mounted router. . Note these bits are not guaranteed due to fragility and application. Amana 48100 specifications major diameter 1-1/8″ minor diameter 3/8″ cutting length 21/32″ shank diameter 3/8″ overall length 2″ radius 5/64″amana 48100 features this bit is designed to produce a t-slot for amerock hinges.

 

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit 14-Inch

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit, 1/4-Inch

Amana Tool 45650 Key Hole Shank Single Flute Carbide Tipped Router Bit, 1/4-Inch - . Amana 45650 specifications large diameter 3/8″ cutting depth 3/8″ shank diameter 1/4″ overall length 1-1/2″amana 45650 features used for cutting keyhole slots in plaques, picture frames and other wall hanging items.

 

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No 1641 with Upper Ball Bearing 14-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank

Amana Tool 45469 Keller Dovetail Carbide Tipped Router Bit for Keller No. 1641 with Upper Ball Bearing, 1/4-Inch Shank - Maximum rpm = 18,000. 1/4-inch shank, 2-flute carbide tipped, industrial quality. Specifically designed to match keller number 1641, 7-degree angle. Cutting diameter 615-inch, 1/2-inch cutting height. 19/32-inch upper radius, 5/32-inch lower radius.

 

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 45700 V Groove 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. 3/4-inch cutting height. 90-degree angle. 1/4-inch shank, 2 flute carbide tipped, industrial quality. Cutting diameter 3/8-inch.

 

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45908 Core Box 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/4-inch cutting height. Carbide tipped, industrial quality. Cutting diameter 3/8-inch. 1/2-inch shank, 2 flute. 3/16-inch radius.

 

Amana Tool 54156 Special Cove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54156 Special Cove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54156 Special Cove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 1/2-inch cutting height. 1/2-inch shank, 2-flute. Cutting diameter 1-1/8-inch. 3/8-inch radius. Carbide tipped, industrial quality.

 

SOSS Amana Tool Router Bit for 103IT203IT 204IT 208IT and 212IT

SOSS Amana Tool Router Bit for 103IT,203IT, 204IT, 208IT, and 212IT

SOSS Amana Tool Router Bit for 103IT,203IT, 204IT, 208IT, and 212IT - 375″. Dimensions overall height, top to bottom -3. Overall product weight -0. Application -door hardware. Country of manufacture -united states. Overall width, side to side -0. -Invisible hinge installation accessories. 25″. 3 lbs. 46259s features -amana tool router bit. Product type -router bit. 375″. Overall depth, front to back -0.

 

Amana Tool 54127 Ogee Fillet 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 54127 Ogee Fillet 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 54127 Ogee Fillet 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Use in a handheld or table-mounted router. Amana 54127 specifications diameter 2-1/4″ radius 3/8″ carbide height 15/16″ shank 1/2″ length 2-7/8″amana 54127 features the ogee pattern has a step at the end of the concave portion of the curve. Using the optional 3/8″ bearing produces with a fillet at the convex end of the curve.

 

Amana Tool 45733 CNC Sign Making and Lettering 3-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45733 CNC Sign Making and Lettering 3-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45733 CNC Sign Making and Lettering 3-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. 1/2-inch shank, 3 flute. Cutting diameter 9/16-inch. 60-degree angle.

 

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide 14-Inch Shank

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/4-Inch Shank

Amana Tool 45950 Core Box 2-Flute Carbide Tipped Router Bit with Ball Bearing Guide, 1/4-Inch Shank - Amana 45950 specifications diameter 1/2″ radius 1/4″ carbide height 3/8″ shank 1/4″ length 2″ type core boxamana 45950 features the shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the workpiece. With a table-mounted router, the template must be on bottom of the workpiece. With a handheld router, the template must be on top of the workpiece.

 

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45726 V Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - 90-degree v groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc. 90-degree angle. 7/16-inch cutting height. Cutting diameter 1-1/4-inch. 1/2-inch shank, 2 flute carbide tipped, industrial quality.

 

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 45788 Lettering 60-Degree 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Designed for routing signs. The 60° cutting angle expels excess material quickly and eliminates chipping and splintering. For use in hardwood, softwood, plywood and composition material.

 

Amana Tool 54532 Vertical Raised Panel Traditional Style 2-Flute Carbide Tipped Router Bit 1-18-Inch Diameter by 12-Inch Shank

Amana Tool 54532 Vertical Raised Panel Traditional Style 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter by 1/2-Inch Shank

Amana Tool 54532 Vertical Raised Panel Traditional Style 2-Flute Carbide Tipped Router Bit, 1-1/8-Inch Diameter by 1/2-Inch Shank - Carbide tipped, industrial quality, 1/2-inch shank, 2 flute. 15-degree angle. Cutting diameter 1-1/8-inch. For use only in a table mounted router. 1-5/8-inch cutting height.

 

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 51558 Bullnose 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings. E. , Given a full 180-degree roundover. Amana 51558 specifications thickness 35/64″ radius 17/64″ carbide height 1″ diameter 1-1/32″ shank 1/2″ length 2-1/2″amana 51558 features shape the full edge of a workpiece with a bullnose radius bit. The “nose diameter” is the thickness of stock that can be nosed, i. Must be used with an edge guide on handheld routers or the fence on a router table.

 

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit 14-Inch Shank

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank

Amana Tool 49300 Rabbet with Ball Bearing Guide 2-Flute Carbide Tipped Router Bit, 1/4-Inch Shank - Amana 49300 specifications depth of rabbet 3/8″ cutting diameter 1-1/4″ cutting height 1/4″, 1/2″ shank 1/4″ flute 2amana 49300 features carbide tipped industrial quality.

 

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit 14-Inch Shank

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank

Amana Tool 45783 Carving Liner Single Flute Solid Carbide Router Bit, 1/4-Inch Shank - Solid carbide, industrial quality. 1/4-inch shank, single flute. 18-degree angle. Cutting diameter 1/4-inch, 5/8-inch cutting height.