23 Most Wanted Flute Drill Bits

 

Precision Twist QC0860P High Speed Steel Extra Long Length Drill Bit Uncoated Bright Finish Round Shank Parabolic Flute 135 Degree Point Angle 532

Precision Twist QC0860P High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Parabolic Flute, 135 Degree Point Angle, 5/32″

Precision Twist QC0860P High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Parabolic Flute, 135 Degree Point Angle, 5/32″ - Parabolic flute design offers enhanced chip removal, coolant flow to the drill point and heat dissipation. Uncoated (bright), economical and useful with a wide range of drilling materials. High-speed steel (hss), for use on a wide variety of materials. Extra-length drill bits have longer flutes and overall lengths than jobber drill bits, for deeper holes. 135-degree radius spilt point, is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges.

 

Precision Twist R51 High Speed Steel Long Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degree Point Angle 1

Precision Twist R51 High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1″

Precision Twist R51 High Speed Steel Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1″ - Long length (also called taper length) drill bits have longer flutes and overall lengths than jobber drill bits. 118-degree conventional point angles good for general drilling applications. Round shanks can be used with a variety of tool-holding systems. High-speed steel (hss), for use on a wide variety of materials. Uncoated (bright) finish, economical and useful with a wide range of drilling applications.

 

Gray 17mm Cutting Diameter High Speed Steel Taper Shank Twist Flute Drill Bit

Gray 17mm Cutting Diameter High Speed Steel Taper Shank Twist Flute Drill Bit

Gray 17mm Cutting Diameter High Speed Steel Taper Shank Twist Flute Drill Bit - Package content package content1 x taper shank twist drill bit 1 x taper shank twist drill bit. 225mm/ 88″ 225mm/ 88″total weight 238g. Neck size 11 x 15mm/ 04″ x 059″ (ld)flute length 127mm/ 5″total length total length. Shank maxdiameter 18mm/ 07″shank length(include tang) 80mm/ 31″tang size 13 x 13 x 6mm/ 05″ x 05″ x 02″ (lwt). Product name taper shank twist drill bitmaterial hsscutting diameter 17mm/ 066″.

 

uxcell 17mm Cutting Diameter HSS Taper Shank Twist Flute Drill Bit

uxcell® 17mm Cutting Diameter HSS Taper Shank Twist Flute Drill Bit

uxcell® 17mm Cutting Diameter HSS Taper Shank Twist Flute Drill Bit - Product name taper shank twist drill bitmaterial hsscutting diameter 17mm/ 067″. 225mm/ 886″ 225mm/ 886″total weight 257g. Package content package content1 x taper shank twist drill bit 1 x taper shank twist drill bit. Shank maxdiameter 18mm/ 071″shank length(include tang) 80mm/ 31″tang size 17 x 13 x 6mm/ 067″ x 05″ x 02″ (lwt). Flute length 125mm/ 49″total length total length.

 

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 316 Size Pack of 1

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/16″ Size (Pack of 1)

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/16″ Size (Pack of 1) - Applicable for non-ferrous material, stainless steel and hardened steel. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Precision Twist 1290 High Speed Steel Extra Long Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degree Point Angle 12

Precision Twist 1290 High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1/2″

Precision Twist 1290 High Speed Steel Extra Long Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 1/2″ - Round shanks, for use on a variety of tool-holding systems. 118-degree conventional point angles, for general drilling applications. Uncoated (bright), economical and useful with a wide range of drilling materials. High-speed steel (hss), for use on a wide variety of materials. Extra-length, for deeper holes.

 

XtremepowerUS Industrial 5pc Cobalt Uni Step Bits 14 38 shank Spiral Flute Drill Bit Set Split Point SAE

XtremepowerUS Industrial 5pc Cobalt Uni Step Bits 1/4″, 3/8″ shank Spiral Flute Drill Bit Set Split Point SAE

XtremepowerUS Industrial 5pc Cobalt Uni Step Bits 1/4″, 3/8″ shank Spiral Flute Drill Bit Set Split Point SAE - 3/16″ to 7/8″ 12 steps (3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″). 1/8″ to 1/2″ 13 steps (1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″). 3/16″ to 1/2″ 6 steps (3/16″, 1/4″, 5/16″, 3/8″ 7/16″, 1/2″). 1/4″ to 1-3/8″ 10 steps (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″). 1/4″ to 3/4″ 9 steps (1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″).

 

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 332 Size Pack of 1

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/32″ Size (Pack of 1)

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/32″ Size (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for non-ferrous material, stainless steel and hardened steel. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Dormer A976 Cobalt Steel Extra Long Length Drill Bit Parabolic Flute PFX Style Uncoated Bright Finish Round Shank 130 Degree Point Angle 400mm

Dormer A976 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 4.00mm

Dormer A976 Cobalt Steel Extra Long Length Drill Bit, Parabolic Flute, PFX Style, Uncoated (Bright) Finish, Round Shank, 130 Degree Point Angle, 4.00mm - Round shanks, for use on a variety of tool-holding systems. Extra-length drill bits have longer flutes and overall lengths than jobber drill bits, for deeper holes. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Uncoated (bright) finish with smooth-flow coating reduces coefficient of friction, has efficient chip evacuation and extends tool life. 130-degree point angle has good centering capabilities and reduces pressure on cutting edges.

 

Industrial 5pc Cobalt Uni Step Bits Spiral Flute Drill Bit Set Split Point Sae

Industrial 5pc Cobalt Uni Step Bits Spiral Flute Drill Bit Set Split Point Sae

Industrial 5pc Cobalt Uni Step Bits Spiral Flute Drill Bit Set Split Point Sae - Automatically deburrs as you drill and provides better chip removal tri-flat shank for sure. Steps (3/16 1/4″ 5/16″ 3/8″ 7/16″ 1/2″) 1/8″ to 1/2″ 13 steps (1/8″ 5/32″ 3/16″ 7/32″ 1/4″ 9″. Grip 135 degree split point self centering 1/4 shank, 3/16″ to 1/2″ 6″. Bits provide longer life and cut faster than high speed steel two spiral flutes. Industrial 5pc cobalt uni step bits spiral flute drill bit set split point sae cobalt steel.

 

Kodiak Cutting Tools KCT140314 USA Made  Solid Carbide Drill Bit 2 Straight Flute 78 Length of Cut 2 Overall Length 316 Diameter

Kodiak Cutting Tools KCT140314 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 7/8″ Length of Cut, 2″ Overall Length, 3/16″ Diameter

Kodiak Cutting Tools KCT140314 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 7/8″ Length of Cut, 2″ Overall Length, 3/16″ Diameter - 3/16 inch diameter solid carbide drill, straight flute 7/8″ length of cut 2″ overall length 2 flute straight flute drill bit, carbide. .

 

Bassett DM Series Solid Carbide Stub Length Drill Bit Uncoated Bright Finish Round Shank Straight Flute 118 Degrees Four-Facet Point 532 Size 2-116 Length Pack of 1

Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 5/32″ Size, 2-1/16″ Length (Pack of 1)

Bassett DM Series Solid Carbide Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 118 Degrees Four-Facet Point, 5/32″ Size, 2-1/16″ Length (Pack of 1) - Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for non-ferrous material, cast iron and steel. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Precision Twist M40CO Cobalt Steel Short Length Drill Bit Gold Oxide Finish Round Shank Spiral Flute 135 Degree Point Angle 916

Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 9/16″

Precision Twist M40CO Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 9/16″ - 135-degree split point angle is self-centering, reduces walking, good for hard material and reduces pressure on cutting edges. Round shanks, for use on a variety of tool-holding systems. High-speed steel (hss) containing cobalt is a good combination of toughness and hardness, for use on drilling through hard substances. Short-length, for better rigidity and increased strength. Gold oxide, retains cutting fluid and prevent chip to tool welding.

 

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 38 Size Pack of 1

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/8″ Size (Pack of 1)

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 3/8″ Size (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Applicable for non-ferrous material, stainless steel and hardened steel. Round shanks allow use with a wide variety of toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Precision Twist R18 High Speed Steel Jobber Drill Bit Black Oxide Finish Round Shank Spiral Flute 118 Degree Point Angle 7 Pack of 12

Precision Twist R18 High Speed Steel Jobber Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, #7 (Pack of 12)

Precision Twist R18 High Speed Steel Jobber Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, #7 (Pack of 12) - Steam tempering (black oxide) finish, retains cutting fluid and prevents chip to tool welding. High-speed steel (hss), for use on a wide variety of materials. Jobber-length drill bits, most common length drill bit, suitable for a wide range of applications. Round shanks, for use on a variety of tool-holding systems. 118-degree conventional point angles, for general drilling applications.

 

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit Uncoated Bright Finish Round Shank Straight Flute 140 Degree Converntional Point 332 Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 3/32″ Size

Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 3/32″ Size - Round shank accommodates most drill chucks. Carbide resists wear better than high-speed or cobalt steel and withstands high speeds. Straight flutes drill shallow and horizontal holes in cast iron, and non-ferrous and hardened materials. Self-centering 140-degree 4-facet point provides strength and high accuracy to penetrate material more easily than a conventional point, and produces small chips to reduce clogging. Uncoated (bright) finish is an untreated surface that can be used on a range of materials.

 

Kodiak Cutting Tools KCT140446 USA Made  Solid Carbide Drill Bit 2 Straight Flute 1-38 Length of Cut 3 Overall Length 38 Diameter

Kodiak Cutting Tools KCT140446 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 1-3/8″ Length of Cut, 3″ Overall Length, 3/8″ Diameter

Kodiak Cutting Tools KCT140446 USA Made Solid Carbide Drill Bit, 2 Straight Flute, 1-3/8″ Length of Cut, 3″ Overall Length, 3/8″ Diameter - . 3/8 inch diameter solid carbide drill, straight flute 1-3/8″ length of cut 3″ overall length 2 flute straight flute drill bit, carbide.

 

uxcell 4mmx11mmx55mm HSS-Al Spiral Groove 2-Flute Drill Bit Slotting End Mills 4pcs

uxcell 4mmx11mmx55mm HSS-Al Spiral Groove 2-Flute Drill Bit Slotting End Mills 4pcs

uxcell 4mmx11mmx55mm HSS-Al Spiral Groove 2-Flute Drill Bit Slotting End Mills 4pcs - Used widely for machine various round headed flat key seats or for milling grooves and bores. Mill kinds of faces, such as step face, convex face, concave face and profile. Comes with a storage case, it is convenient for you to carry it about. Straight shank, standard 2 flutes, slot drill, keyway milling cutter.

 

Precision Twist DS 90 Solid Carbide Spotting Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 90 Degree Point Angle 316

Precision Twist DS 90 Solid Carbide Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 90 Degree Point Angle, 3/16″

Precision Twist DS 90 Solid Carbide Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 90 Degree Point Angle, 3/16″ - Intermediate-length spotting drill bits, for starting holes. 90-degree conventional point angles, for reduced stress on drill’s. Uncoated (bright), for use with a wide range of drilling materials. Carbide, for use on abrasive materials and high cutting temperatures. Round shanks, for use on a variety of tool-holding systems.

 

Kodiak Cutting Tools KCT229227 USA Made Solid Carbide Drill Bit AlTiN Coated Straight Flute 2 Flute 316 Diameter 78 Length of Cut 2 Overall Length

Kodiak Cutting Tools KCT229227 USA Made Solid Carbide Drill Bit, AlTiN Coated, Straight Flute, 2 Flute, 3/16″ Diameter, 7/8″ Length of Cut, 2″ Overall Length

Kodiak Cutting Tools KCT229227 USA Made Solid Carbide Drill Bit, AlTiN Coated, Straight Flute, 2 Flute, 3/16″ Diameter, 7/8″ Length of Cut, 2″ Overall Length - 3/16 inch diameter solid carbide drill, straight flute 7/8″ length of cut 2″ overall length altin coating 2 flute straight flute drill bit, carbide. .

 

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 18 Size Pack of 1

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/8″ Size (Pack of 1)

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/8″ Size (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Applicable for non-ferrous material, stainless steel and hardened steel. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications.

 

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Point 14 Size Pack of 1

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/4″ Size (Pack of 1)

Bassett DS Series Solid Carbide Spade Stub Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Point, 1/4″ Size (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications. Applicable for non-ferrous material, stainless steel and hardened steel. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

INDUSTRIAL 5pc COBALT UNI STEP BITS SPIRAL FLUTE DRILL BIT SET SPLIT POINT SAE

INDUSTRIAL 5pc COBALT UNI STEP BITS SPIRAL FLUTE DRILL BIT SET SPLIT POINT SAE

INDUSTRIAL 5pc COBALT UNI STEP BITS SPIRAL FLUTE DRILL BIT SET SPLIT POINT SAE - Typemulti-bit set, country/region of manufacturechina. Brandneiko pro. Mpn10228b.