23 Greatest Scarifiers

 

EDCO CPM-8-9H 8-Inch Walk-Behind Gasoline Scarifier

EDCO CPM-8-9H 8-Inch Walk-Behind Gasoline Scarifier

EDCO CPM-8-9H 8-Inch Walk-Behind Gasoline Scarifier - Ideal for sidewalk trip hazard repair floor cleaning and or preparation traffic line and markings removal creating non-slip surfaces. 8-inch working width will scarify approximately 350-500 sq ft per hour at a depth per pass of 1/8-inch. Removes trafic lines at 800-1000 lineal feet per hour.

 

Kraft Tool Plaster and Stucco Scarifier 12-inch Pro Form Handle

Kraft Tool Plaster and Stucco Scarifier 12-inch Pro Form Handle

Kraft Tool Plaster and Stucco Scarifier 12-inch Pro Form Handle - . All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. Used to easily scratch undercoats so finish coat will bond and not separate.

 

8 pt Carbide Flail Cutter Complete Drum Kit for Sase SC10E ScarifierPlaner - General Setup

8 pt Carbide Flail Cutter Complete Drum Kit for Sase® SC10E® Scarifier/Planer – General Setup

8 pt Carbide Flail Cutter Complete Drum Kit for Sase® SC10E® Scarifier/Planer – General Setup - Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Many other scarifier accessories and configurations available upon request to our customer service department. Note all sizes and dimensions are approximate. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the sase® sc10e® scarifier/planer. Fully assembled and ready for use. .

 

5 pt Carbide Flail Cutter Complete Drum Kit for Von Arx VA25 ScarifierConcrete Planer - General Setup

5 pt Carbide Flail Cutter Complete Drum Kit for Von Arx VA25 Scarifier/Concrete Planer – General Setup

5 pt Carbide Flail Cutter Complete Drum Kit for Von Arx VA25 Scarifier/Concrete Planer – General Setup - 81 pcs of 5 point 1-3/4″ carbide flail cutters. Complete drum replacement kit designed for von arx® va25® scarifier/concrete planer. 6 pcs of 12mm hardened steel shafts. 99 pcs of hardened steel spacers. Includes fully assembled drum with long lasting cutters, shafts, and spacers.

 

5 pt Carbide Flail Cutter 173 OD x 063 ID x 024 W - Scarifier Accessories and Consumables 50 pcs

5 pt Carbide Flail Cutter (1.73″ OD x 0.63″ ID x 0.24″ W) – Scarifier Accessories and Consumables (50 pcs)

5 pt Carbide Flail Cutter (1.73″ OD x 0.63″ ID x 0.24″ W) – Scarifier Accessories and Consumables (50 pcs) - They also work great to remove traffic lines, pavement markings, epoxy, paint, and waterproofing membranes. . Note all sizes and dimensions are approximate. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Many other scarifier accessories available upon request to our customer service department. Altcut’s carbide flail scarifier cutters are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with many of the most popular scarifier/concrete planer machines, such as airtec®, bartell®, blastrac®, diteq®, edco®, kut-rite®, sase®, smith mfg®, and von arx®.

 

6 pt Carbide Flail Cutter Consumables Kit for Edco CPM-8 ScarifierConcrete Planer - General Setup

6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-8® Scarifier/Concrete Planer – General Setup

6 pt Carbide Flail Cutter Consumables Kit for Edco® CPM-8® Scarifier/Concrete Planer – General Setup - Altcut’s carbide flail cutter replacement kits are designed for leveling, grinding, cleaning, grooving, milling, and general surface preparation with the edco® cpm-8® scarifier/concrete planer. Note all sizes and dimensions are approximate. Our premium quality tungsten carbide flail cutters last up to 30 times longer and remove up to 5 times faster than traditional steel scarifier cutters. Many other scarifier accessories available upon request to our customer service department. They are also great for removing pavement markings, epoxy, paint, and waterproofing membranes. Drum and bushings sold separately.

 

Bon 13-192 14-Inch Spring Steel Scarifier 3-Inch Tines

Bon 13-192 14-Inch Spring Steel Scarifier, 3-Inch Tines

Bon 13-192 14-Inch Spring Steel Scarifier, 3-Inch Tines - . Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat. Available in several size options.

 

MK Diamond 158585 Replacement Drum with 18 Point Steel Sharp Tooth for SG-9 and SG-5 Series MK Diamond Scarifier

MK Diamond 158585 Replacement Drum with 18 Point Steel Sharp Tooth for SG-9 and SG-5 Series MK Diamond Scarifier

MK Diamond 158585 Replacement Drum with 18 Point Steel Sharp Tooth for SG-9 and SG-5 Series MK Diamond Scarifier - Drum weighs 30 pounds. Scarifier drums come in a variety of cutter combinations to provide different speeds, removal rates and profiles. 18 point steel sharp tooth cutter for lightly scarify, clean surfaces, removal of traffic lines or coatings.

 

6 pt TCT Carbide Fail Cutter Drum Assembly Compatible Edco CPM-8 Smith Mfg SPS8 Scarifier - General Setup

6 pt (TCT Carbide) Fail Cutter Drum Assembly Compatible Edco CPM-8 & Smith Mfg SPS8 Scarifier – General Setup

6 pt (TCT Carbide) Fail Cutter Drum Assembly Compatible Edco CPM-8 & Smith Mfg SPS8 Scarifier – General Setup - 78 pcs carbide flail cutter n/p 186125-6f. Complete deluxe bushed drum. 210 pcs of hardened steel spacers. 6 pcs of 1/2″hardened steel shafts. Drum n/p 62080656.

 

Kraft Tool Plaster and Stucco Scarifier 16-inch Pro Form Handle

Kraft Tool Plaster and Stucco Scarifier 16-inch Pro Form Handle

Kraft Tool Plaster and Stucco Scarifier 16-inch Pro Form Handle - Used to easily scratch undercoats so finish coat will bond and not separate. All welded steel construction with a comfortable proform handle that has a threaded end to accept standard broom style handles. .

 

Edco Scarifier Cutters E12130

Edco Scarifier Cutters #E12130

Edco Scarifier Cutters #E12130 - Throw-away insert with larger, heavier cutters. Heavy duty scarifier assembly. Removing concrete buildup. Breaking up hard-surfaced deposits of oil, dirt, fiberglass, rubber, grout or plaster. Life 8 to 12 hours.

 

Marshalltown Scarifier 8 by Marshalltown

Marshalltown Scarifier 8 by Marshalltown

Marshalltown Scarifier 8 by Marshalltown - Red, metal rake head. Fan-shaped steel rake head. Head-to-handle connection has a bolted design. Marshalltown scarifier 8.

 

MK Diamond 158532 SG-9 Gas Scarifier with Blank Drum

MK Diamond 158532 SG-9 Gas Scarifier with Blank Drum

MK Diamond 158532 SG-9 Gas Scarifier with Blank Drum - Drums available to provide cleaning, texturing, leveling, grooving and paint removal. Drums are interchangeable and provide for fast and easy changeover. Unique engage/disengage lever allows the operator to raise and lower the drum without losing the depth setting. Designed to leave a clean, textured or rough finish on any type of concrete or asphalt surface.

 

MK Diamond 158584 Replacement Drum with 6 Point Carbide Cutter for SG-9 and SG-5 Series MK Diamond Scarifier

MK Diamond 158584 Replacement Drum with 6 Point Carbide Cutter for SG-9 and SG-5 Series MK Diamond Scarifier

MK Diamond 158584 Replacement Drum with 6 Point Carbide Cutter for SG-9 and SG-5 Series MK Diamond Scarifier - Drum weighs 30 pounds. 6 point carbide cutter is long lasting and fast milling of concrete, asphalt or coatings. Scarifier drums come in a variety of cutter combinations to provide different speeds, removal rates and profiles.

 

MK Diamond 158575 Hardened Steel Spacer for Scarifier Drum Assembly

MK Diamond 158575 Hardened Steel Spacer for Scarifier Drum Assembly

MK Diamond 158575 Hardened Steel Spacer for Scarifier Drum Assembly - Mk diamond 158575 hardened steel spacer is for scarified drum assembly. . It is a replaceable part and a part to an accessory.

 

Bon 83-135 12-Inch Plaster Scarifier with Plastic Handle

Bon 83-135 12-Inch Plaster Scarifier with Plastic Handle

Bon 83-135 12-Inch Plaster Scarifier with Plastic Handle - Bon’s plaster scarifier is made with a spring steel blade and a plastic handle. This tool makes scratching undercoat easy. .

 

Swisher 16195 Scarifier Bucket Tooth Kit

Swisher 16195 Scarifier Bucket Tooth Kit

Swisher 16195 Scarifier Bucket Tooth Kit - This set of rugged swisher scarifier teeth kit gives the universal dump bucket (item# 2500875, sold separately) traction when loading dirt or rock. U. L x 5in. Color black, size 44in. H, accessory type parts/hardware, compatible with universal dump bucket, dimensions l x w x h (in. S. ) 44 x 5 x 2 3/4, material type steel, mounting hardware included yes, water resistant yes. Its heavy-duty design is great at breaking through compacted soil mounds and other materials. A. W x 2in.

 

EGM Scarifier Machine 20-8 Surface Preparation

EGM Scarifier Machine 20-8 Surface Preparation

EGM Scarifier Machine 20-8 Surface Preparation - The machine has a one year warranty and is manufacture in the usa. Designed for roughening, scarifying, texturing and planing concrete, asphalt also remove traffic lines, road marking and thermoplastics. The cutters included are carbide flail cutters with 6 points p/n 186125-6f. The egm 20-8 machine comes with a drum assembly p/n 4708-1763-5gf general set up. Comes with a 9 hp honda motor.

 

SASE SC08E 8 Concrete Scarifier Planer Grinder 55 HP Honda Engine  Drum

SASE SC08E 8″ Concrete Scarifier Planer Grinder 5.5 HP Honda Engine + Drum

SASE SC08E 8″ Concrete Scarifier Planer Grinder 5.5 HP Honda Engine + Drum - Includes the following with purchase sc08e 8″ gas powered scarifier -free- sc08e drum + tungsten cutters installed ($492. Not recommended to ship via ups due to damage to the motor / machine. Included with this machine is a free, loaded with tungsten carbide, sc08e tungsten drum, this drum retails at $492. The sase sc08e scarifier is a compact scarifier/planer that has uncompromising performance for its small size. 00 and is included with your purchase. Gas powered side access drum assembly allows for fast & easy changes of drum / cutters. This machine features a heavy-duty hex shaft that holds the drum in place, easy side access for drum assembly / changing, easy handling and lightweight, all while performing incredibly well for any surfacing needs. Scarifier featuresheavy-duty hex shaft holds drum in place and is very durable. Sasesc08 scarifier model # sc. This machine is ideal for any kind of concrete removal, prep, or asphalt/concrete work or removal. 00 value) technical data required power gas powered motor. Equipped with an emergency stop safety cord to kill the machine during an emergency. This item ships via small pallet using old dominion freight lines, it cannot ship via ups, please be prepared for pallet delivery at the address you provide. All replaceable parts are available, such as the wheels, drums, bearings etc. Connects to the sase bull 45 vacuum ( or any other industry 2″ hose vacuum) for dust-free use. An affordable means of scarifying & floor prep. 020 a compact scarifier / planer that has uncompromising performance for its small size. Easy handling, weighing 92 lbs this scarifier is easy to transport and perfect for any job. 08. Ideal for any kind of concrete removal, prep, or asphalt/concrete paint removal. All replacement parts are available for this machine. Engine horsepower 5. 5hp weight 92lbs dimensions 47x14x34-42 inches shippingships via small pallet using old dominion freight lines freight company.

 

Bon 13-118 16-Inch Spring Steel Scarifier 3-Inch Tines

Bon 13-118 16-Inch Spring Steel Scarifier, 3-Inch Tines

Bon 13-118 16-Inch Spring Steel Scarifier, 3-Inch Tines - Available in several size options. Made of light, flexible spring steel tines makes scratching undercoat easy, allowing a good bond with the finish coat.

 

36 SOLENT TOOLS Tines to suit QUALCAST PETROL 35 Cassette Scarifier by SOLENT TOOLS

36 SOLENT TOOLS Tines to suit QUALCAST PETROL 35 Cassette Scarifier by SOLENT TOOLS

36 SOLENT TOOLS Tines to suit QUALCAST PETROL 35 Cassette Scarifier by SOLENT TOOLS - Replacement kit designed for edco® cpm-4®/cpm-8® edger scarifier/planer. Includes long lasting cutters, shafts, and spacers. 114 pcs of hardened steel spacers with 12 extra spacers free (126 total spacers). 36 solent tools tines to suit qualcast petrol 35 cassette scarifier. 54 pcs of 6 point 1-3/4″ carbide flail cutters.

 

Scarifier for Concrete and Asphalt with Lifan Engine 9 HP

Scarifier for Concrete and Asphalt with Lifan Engine 9 HP

Scarifier for Concrete and Asphalt with Lifan Engine 9 HP - 71 fuel capacity (qt) 5. It also has variable speed control and regulation in the depth of cut. The scarifier sc-9 is used to prepare and repair the concrete and asphalt floors. Included vacuum port equipped. It is applied to the following services pinking the floor to receive new flooring, create non-slip furrows, remove traffic lanes and clean surfaces of floors in general. The scarifier has a robust chassis, which increases the equipment life and reduces the level of vibration, bringing to the operator more comfort during the job. 4 working width (in) 9 depth of cut per pass (in) 1/8 surface capacity scarification (ft²/h) depending on soil & environmental factors 350-500 traffic line removal capacity (ft²/h) depending on soil & environmental factors 800 power transmission from drive motor via centrifugal clutch and v-belt direct to axis. Dimensions w x l x h (in) 20 x 36 x 33 engine make / model lifan engine power (hp) 9 hp engine type air-cooled single-cylinder four-cycle engine rpm 3600 start method recoil fuel gasoline fuel consumption us gal/h 0.

 

Draper 34276 135mm Plastering Scarifier by Draper

Draper 34276 135mm Plastering Scarifier by Draper

Draper 34276 135mm Plastering Scarifier by Draper - Draper 34276 135mm plastering scarifier. Red, metal rake head. Marshalltown scarifier 8. Head-to-handle connection has a bolted design.