22 Top Bit Extensions

 

Eagle Tool EX18736 Flexible Cable Bit Extension 316 Diameter x 36 Length Pack of 1

Eagle Tool EX18736 Flexible Cable Bit Extension, 3/16″ Diameter x 36″ Length (Pack of 1)

Eagle Tool EX18736 Flexible Cable Bit Extension, 3/16″ Diameter x 36″ Length (Pack of 1) - Flexible spring steel shank. Three flat non-slip grip on the chuck end. Eagle tool flexible cable bit extension. . Measures 3/16-inches in diameter by 36-inches in length. Wire fishing accommodation holes in the shank.

 

Titan Flexible Extension Bit Holder 14in

Titan Flexible Extension Bit Holder 1/4in

Titan Flexible Extension Bit Holder 1/4in - Titan tools flexible magnetic bit holder is a locking, magnetic, quick release bit holder designed to flex and hold at various angles to allow access to hard to reach areas. The magnet is 12 times stronger than a standard bit holder. This bit holder is made for use with hand or power tool drivers. .

 

Bosch T3926SC 13-Inch Extension Sds-Plus for Speedcore Thin-Wall Core Bits

Bosch T3926SC 13-Inch Extension Sds-Plus for Speedcore Thin-Wall Core Bits

Bosch T3926SC 13-Inch Extension Sds-Plus for Speedcore Thin-Wall Core Bits - Bosch sds-plus thin-wall core bits are optimized for drilling with smaller hammers. Extension plus bit beyond 8-inch should not exceed 600 rpm. Core body range is 1-inch up to 4-3/8-inch with a usable cutting depth of 3-inch.

 

McKay 3 Pc Magnetic 14 Diameter Hex Shank Bit Extensions Set AKA Magnetic Socket Nut Drive Holder Hex Shank Chucks Firmly into most Power Tools Drills Screw Drivers

McKay 3 Pc Magnetic 1/4″ Diameter Hex Shank Bit Extensions Set AKA Magnetic Socket Nut Drive Holder: Hex Shank Chucks Firmly into most Power Tools, Drills & Screw Drivers

McKay 3 Pc Magnetic 1/4″ Diameter Hex Shank Bit Extensions Set AKA Magnetic Socket Nut Drive Holder: Hex Shank Chucks Firmly into most Power Tools, Drills & Screw Drivers - Sturdy hardened & tempered construction made with high grade s2 steel with chrome-finish holders material for a long lasting endurance hardened core for extra strength and reduced breakage heat-treated to guarantee bit hardness that stands up to any job manufacturer’s lifetime warranty. Variety sizes, multifunction, 3 pc tool set 3 pc assorted sizes so you always have the right size handy when needed 2″, 4″ & 6″ length size included. Easily clicks into most power tool shanks or hex screwdriver extensions easily attaches into most hex hole screwdriver or power tool shanks like dewalt and connect magnetically to any hex bit. Intended uses our bit holder extensions set is a must-have tool accessory set, connects to most power drills and impact drivers securly great for working with hard to reach screws the socket ends with a magnetic piece that securily attaches onto any hex bit. Identical match for most standard hex bits all the other variations on this page are an exact match to this extension feel free to order this extension along with any of our other bit sets attachments.

 

Vermont American 17104 12-Inch Standard Drill Bit Extension

Vermont American 17104 12-Inch Standard Drill Bit Extension

Vermont American 17104 12-Inch Standard Drill Bit Extension - Works great in hard to reach places. Use drill bit extensions for drilling deep holes. Extend any 1/4-inch shank drill bit to12-inch.

 

Drill Warehouse 10 Pack Magnetic Extension Socket Drill Bit Holder 14 Hex Power Tools Pack in Metal Box

Drill Warehouse 10 Pack Magnetic Extension Socket Drill Bit Holder 1/4″ Hex Power Tools, Pack in Metal Box

Drill Warehouse 10 Pack Magnetic Extension Socket Drill Bit Holder 1/4″ Hex Power Tools, Pack in Metal Box - Must-have accessory set for power drills and impact drivers. Great for working with hard to reach screws. Unlimited uses in automotive, hardware, hobby, home, etc. Strong magnet holds bits securely, and the magnet is located inside the chrome tube. Designed for 1/4″ hex shank bits.

 

AUTOTOOLHOME Self-locking 14Hex Flexible Flex Shaft Magnetic Screwdriver Bit Extension Bar

AUTOTOOLHOME Self-locking 1/4″Hex Flexible Flex Shaft Magnetic Screwdriver Bit Extension Bar

AUTOTOOLHOME Self-locking 1/4″Hex Flexible Flex Shaft Magnetic Screwdriver Bit Extension Bar - The tool features durable die cast construction and an adjustable 360 degree thumb flange for added convenience also features a 1/4 hex driver system. 1/4″ hex driver system. 100% high quality and brand new. Adjustable 360 degree thumb flange. This hex socket extension is an ideal accessory for use when access is limited and a standard socket wont fit.

 

Ideal Industries Flexible Bit Extension 14 x 36

Ideal Industries Flexible Bit Extension, 1/4″ x 36″

Ideal Industries Flexible Bit Extension, 1/4″ x 36″ - Ideal 34-002 specifications length 7-1/2″ capacity 0, 100a/250v & 600v 1/2″ to 1″ diameter fuses ideal 34-002 includes (1) medium fuse puller ideal 34-002 features handy and convenient for removing or replacing cartridge-type fuses three sizes handle fuses ranging from 0 to 600a (small and large pullers are sold separately) fully insulated, high dielectric, glass filled polypropylene construction notched handles provide safe, no-slip grip clearly marked amperage ranges.

 

Flexible Extension Bit Holder - Gethome Quick Change Screwdriver Drill Bit Holder Shaft Connecting Link for Electronic Drill Connection

Flexible Extension Bit Holder – Gethome Quick Change Screwdriver Drill Bit Holder Shaft Connecting Link for Electronic Drill Connection

Flexible Extension Bit Holder – Gethome Quick Change Screwdriver Drill Bit Holder Shaft Connecting Link for Electronic Drill Connection - Plastic and metal material, durable and portable, flexible out shield protects your hand while inside shaft rotates. Bends,twist and turns to use drill into tight and confined spaces. All our product will test before sending out, once customer unhappy with it, just send back and get your money,now click”add to cart” to get your new flexible extension bit holder. Length about 295mm(116 inches). Shank dia64mm / 1/4″ ,total length300mm / 12″.

 

Concord Blades EXT06D 6 Inch Core Bit Extension 58-11 M to F

Concord Blades EXT06D 6 Inch Core Bit Extension 5/8″-11 (M) to (F)

Concord Blades EXT06D 6 Inch Core Bit Extension 5/8″-11 (M) to (F) - 6 inch core bit extension. Easily extends the drilling depth to 6″ deep. This extension shaft is for use on core drill machines and dry core bits with 5/8″-11 thread. Use this on a core drill to a 5/8″-11 male thread to 5/8″-11 female thread.

 

Titan Tools 16012 12 Quick Release Extension Bit Holder

Titan Tools 16012 12″ Quick Release Extension Bit Holder

Titan Tools 16012 12″ Quick Release Extension Bit Holder - It has an extended driver for hard to reach areas. Titan 12 inch quick release extension bit holder features a 12 inch quick release extension chuck. There is a locking, magnetic, low profile and quick release bit holder. It has an auto locking drive.

 

DEWALT DW1647 12-Inch Selfeed Bit Extension

DEWALT DW1647 12-Inch Selfeed Bit Extension

DEWALT DW1647 12-Inch Selfeed Bit Extension - Dewalt is a leading manufacturer of industrial power tools with more than 300 power tool and equipment products as well as 800 power tool accessories. The dewalt dw1647 12-inch selfeed bit extension features an aggressive spur which provides fast material penetraion, and optimized cutting geometry which provides longer bit life. Commonly used by plumbers drilling rough holes in wood for running pipe. Dewalt tools can be found wherever tools are sold, nationally and internationally. The open tooth design allows for more resharpenings giving longer bit life. Also features a 7/16″ ball groove shank for quick change applications.

 

Lenox 30925-VBX8 Vari-Bit 8-Inch Step Drill Bit Extension with 38-Inch Shank

Lenox 30925-VBX8 Vari-Bit 8-Inch Step Drill Bit Extension with 3/8-Inch Shank

Lenox 30925-VBX8 Vari-Bit 8-Inch Step Drill Bit Extension with 3/8-Inch Shank - Starts on contact split point design for faster penetration and less walking. Fits 3/8″ drill chuck larger. Long tool life steam oxide coating adds durability. 1 per clam lenox vbx8 features accurate, burr-free holes patented two flute design cuts fast, clean, round holes. Enhanced flute design removes chips rapidly, ensuring longer tool life. Lenox vbx8 specifications extension 8″.

 

Bosch Daredevil PSBE1012 12-Inch Drill Bit Extension

Bosch Daredevil PSBE1012 12-Inch Drill Bit Extension

Bosch Daredevil PSBE1012 12-Inch Drill Bit Extension - 1/4-inch hex drive extension for bosch spade bits. The item is bosch daredevil dsbe1012 12-inch drill bit extension. Features a full cone threaded tip for fast and effortless drilling. Used for power tool accessories, drill bits & accessories. Provides a cleaner hole quality with reduced breakout. Hex shank power groove to reduce slippage. Spur and reamer tips for cleaner holes. The product is manufactured in china.

 

Greenlee 902-24 Bit Extension 24-Inch

Greenlee 902-24 Bit Extension, 24-Inch

Greenlee 902-24 Bit Extension, 24-Inch - Product type -adapters & extensions. -Price is for 1 each. 332-902-24 features -extend bit lengths, holesaw arbors, spade bits, nail eater ii® bits, electrician’s bits and step bits. -shank type hex. -Use for boring deeper in wood. Dimensions overall product weight -0. Number of bits -1. 95 pounds.

 

Router Technologies EX 2080 Xtreme Xtension Professional Router BitCollet Extension

Router Technologies EX 2080 Xtreme Xtension Professional Router Bit/Collet Extension

Router Technologies EX 2080 Xtreme Xtension Professional Router Bit/Collet Extension - Quickly change cutters from above the table with a quick 1/4 turn of the wrench. No need to search for your spindle lock or use a pair of wrenches to change bits again. Short length and massive body eliminate deflection found with other extensions. Dynamically balanced and machined from fatigue proof steel allows running larger cutters. Use with any router table or any router lift to give you the cutter height you need and convenience you will love includes 1/4 to 1/2 adapter and hex key.

 

IRWIN 1869516 Impact Performance Series Quick Change Bit Extension 14-Inch Shank 6-Inch

IRWIN 1869516 Impact Performance Series Quick Change Bit Extension, 1/4-Inch Shank, 6-Inch

IRWIN 1869516 Impact Performance Series Quick Change Bit Extension, 1/4-Inch Shank, 6-Inch - Patented jaw design is compatible with all 1/4″ hex shank accessories including insert bits. Built for maximum durability and long life with impact drivers. Withstand higher torque demands of impact drills. Black oxide finish resists corrosion and increases life of extension.

 

IIT 64510 Magnetic Bit Extensions Set 3-Piece

IIT 64510 Magnetic Bit Extensions Set, 3-Piece

IIT 64510 Magnetic Bit Extensions Set, 3-Piece - Magnetized ends holds bits securely. Hex shank chucks firmly into drills. Accepts any 1/4 bit. Also useful in hand-held drivers. For hard to reach screws and nuts.

 

DEWALT DW1589 12-Inch Extension for DEWALT Spade Drill Bits

DEWALT DW1589 12-Inch Extension for DEWALT Spade Drill Bits

DEWALT DW1589 12-Inch Extension for DEWALT Spade Drill Bits - 1/4″ ball groove shank for quick change applications. Max life corner for longer life in nails. Extreme speed channel for fast chip removal. Heavy duty shank for superior durability.

 

3pc Magnetic Bit Holder Extensions 2-4-6 Quick Change

3pc Magnetic Bit Holder Extensions 2-4-6″ Quick Change

3pc Magnetic Bit Holder Extensions 2-4-6″ Quick Change - Hardened tempered tool steel with chrome-finish holders manufacturer’s lifetime warranty. 1/4″ quick-change hex shanks fit all power drills, 1/4″ impact drivers and hand-held drivers. Extensions in lengths 6″, 4″ & 2″ for superior access for hard-to-reach fasteners. Must-have accessory set for power drills and impact drivers. Strong permanent magnets hold bits securely in place accepts all 1/4″ hex-shank bits.

 

Pack of 7 2612 Magnetic Bit Extension Holder Quick Change 14 Hex Shank for Power Drill

Pack of 7 2/6/12″ Magnetic Bit Extension Holder Quick Change 1/4″ Hex Shank for Power Drill

Pack of 7 2/6/12″ Magnetic Bit Extension Holder Quick Change 1/4″ Hex Shank for Power Drill - Size included 25″ (3pcs), 6″ (3pcs) and 12″ (1pcs). Material chrome vanadium steel cr-v/ steel w/ chrome plate. Quick release 1/4″ hex shank. Pack of 7, extension magnetic bit holder. 1/4″ hex shank fits all power drill/ impact driver and hand held driver.

 

IVY Classic 10702 12-Inch Wood Spade Bit Extension High-Carbon Steel 1Card

IVY Classic 10702 12-Inch Wood Spade Bit Extension, High-Carbon Steel, 1/Card

IVY Classic 10702 12-Inch Wood Spade Bit Extension, High-Carbon Steel, 1/Card - High-carbon steel construction, precision ground and polished. Ideal for use with wood spade bits. Length 12-inch, shank 1/4-inch quick-change power hex. Two set screws and hex key included to fasten the shank in place, use the hex key to tighten these screws. Extends any 1/4-inch round or hex shank bit an additional 12 inches, swift bore (registered trademark).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.