20 Best Jobber Drill Bit Sets

 

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 12 in 164 increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments - Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 29 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point 116 - 12 in 132 increments

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/32″ increments

Drillco 200LH Series 15 Piece High-Speed Steel Left Hand Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, 1/16″ – 1/2″ in 1/32″ increments - 15 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/32″ increments. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point Drill Pal 116 - 12 in 164 increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments

Drillco 400N Series Nitro 29 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments - Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 drill pal mechanics length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set TiN Finish Straight Shank Parabolic Spiral Flute 130 Degree Set of 47

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Parabolic Spiral Flute, 130 Degree (Set of 47)

YG-1 DLGPSET932 47 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Parabolic Spiral Flute, 130 Degree (Set of 47) - Applicable for improved chip removal in most materials, especially in deep drilling applications. Ansi specifications met. Also includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47 size drill bits. Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 size drill bits. Bright body tin coating on working part.

 

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point Size 1 - 60

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60

Drillco 400N Series Nitro 60 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, Size #1 – #60 - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 60 jobber length drill bits ranging in size from #1 to #60. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools.

 

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set 13 Piece

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (13 Piece)

Viking Drill and Tool by Norseman 49042 SP-11M Type 643-UB 135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (13 Piece) - Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. Special hi-molybdenum tool steel/gold oxide. 13 pc set premium metric jobber 135-degree split point nas 907b. Nas 907b heavy duty jobber. 135-degree split point for accurate centering and fast penetration.

 

Drillco 200 Series 29 Piece High-Speed Steel Jobber Drill Bit Set Black Oxide Finish Round Shank Spiral Flute 118 Degrees Conventional Point Drill Pal 116 - 12 in 164 increments

Drillco 200 Series 29 Piece High-Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments

Drillco 200 Series 29 Piece High-Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, Drill Pal 1/16″ – 1/2″ in 1/64″ increments - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 29 piece jobber drill set. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems.

 

Drillco 500E Series 13 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set Bronze Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 14 in 164 increments

Drillco 500E Series 13 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments

Drillco 500E Series 13 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments - High red hardness of cobalt permits speeds 30 percent greater than hss drills. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 13 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments.

 

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set TiN Finish Straight Shank Slow Spiral 135 Degree Set of 56 by YG-1

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56) by YG-1

YG-1 D2GPSET930 56 Piece High Speed Steel Gold-P Split Point Jobber Drill Bit Set, TiN Finish, Straight Shank, Slow Spiral, 135 Degree (Set of 56) by YG-1 - Set includes 1 each of #1, #2, #3, #4, #5, #6, #7, #8, #9, #10, #11, #12, #13, #14, #15, #16, #17, #18, #19, #20, #21, #22, #23, #24, #25, #26, #27, #28, #29, #30, #31, #32, #33, #34, #35 drill bitsalso includes #36, #37, #38, #39, #40, #41, #42, #43, #44, #45, #46, #47, #48, #49, #50, #51, #52, #53, #54, #55, #56 drill bitsbright body tin coating on working partapplicable for drilling in steel, cast steel alloyed and non-alloyed, grey cast iron, graphite, malleable cast ironansi specifications met.

 

116-14 by 64ths VME Cobalt Jobber Drill Bit Set

1/16-1/4″ by 64ths VME Cobalt Jobber Drill Bit Set

1/16-1/4″ by 64ths VME Cobalt Jobber Drill Bit Set - Cobalt drills will take more heat than high speed steel drills, extending their life and allowing them to better cut hard materials such as stainless steels. Sets of cobalt jobber length drills in metal case.

 

Precision Twist C252ASET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 10 mm - 130 mm x 05 mm Uncoated Bright

Precision Twist C252ASET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 1.0 mm – 13.0 mm x 0.5 mm, Uncoated (Bright)

Precision Twist C252ASET 25-Piece Metric High Speed Steel Jobber Drill Bit Set with Size Range 1.0 mm – 13.0 mm x 0.5 mm, Uncoated (Bright) - 25 piece metric high speed steel drill set with the size range from 10mm, 130mm x 5mm, polished bright finish in a metal index. Polished bright finish improves chip flow in soft or non-ferrous materials. 118 degree point high speed steel drill.

 

Drillco 400 Series 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point includes 116 - 12 in 164 increments Sizes 1 - 60 and A - Z

Drillco 400 Series 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z

Drillco 400 Series 115 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z.

 

Drillco 500E Series 21 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set Bronze Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 38 in 164 increments

Drillco 500E Series 21 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments

Drillco 500E Series 21 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments - 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High red hardness of cobalt permits speeds 30 percent greater than hss drills. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Round shanks allow use with a wide variety of toolholding systems.

 

Viking Drill and Tool by Norseman 58650 SP-11M Type 643-UB135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set 11 Piece

Viking Drill and Tool by Norseman 58650 SP-11M Type 643-UB135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (11 Piece)

Viking Drill and Tool by Norseman 58650 SP-11M Type 643-UB135 Degree Split Point Magnum Super Premium Jobber Drill Bit Set (11 Piece) - Special hi-molybdenum tool steel/gold oxide. 11 pc set premium metric jobber 135-degree split point nas 907b. 135-degree split point for accurate centering and fast penetration. Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance. Nas 907b heavy duty jobber.

 

Drillco 200B Series 115 Piece High-Speed Steel Jobber Drill Bit Set Uncoated Bright Finish Round Shank Spiral Flute 118 Degrees Conventional Point includes 116 - 12 in 164 increments Sizes 1 - 60 and A - Z

Drillco 200B Series 115 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z

Drillco 200B Series 115 Piece High-Speed Steel Jobber Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 118 Degrees Conventional Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Round shanks allow use with a wide variety of toolholding systems. 115 piece jobber drill set. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 38 in 164 increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments - Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. 21 jobber length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments.

 

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case 1-60 Size A-Z and 116-12 x 64ths 115 Piece

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case, #1-60 Size, A-Z and 1/16-1/2 x 64ths, 115 Piece

Drill America KFD115J-SET KFD Black and Gold HSS Split Point Jobber Drill Bit Set in Metal Case, #1-60 Size, A-Z and 1/16-1/2 x 64ths, 115 Piece - #1-60, a-z & 1/16-1/2 x 64ths 115 piece kfd black & gold hss split point jobber drill bit set in metal case. .

 

Drillco 500 Series 115 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set Bronze Finish Round Shank Spiral Flute 135 Degrees Split Point includes 116 - 12 in 164 increments Sizes 1 - 60 and A - Z

Drillco 500 Series 115 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z

Drillco 500 Series 115 Piece Cobalt Steel Heavy-Duty Jobber Drill Bit Set, Bronze Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, includes: 1/16″ – 1/2″ in 1/64″ increments, Sizes #1 – 60 and A – Z - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. 115 jobber length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments, from #1 to #60, and from a to z. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. High red hardness of cobalt permits speeds 30 percent greater than hss drills.

 

Precision Twist C26R15 High Speed Steel Jobber Drill Bit Set Black Oxide Finish Round Shank Spiral Flute 118 Degree Point Angle 26 piece A to Z

Precision Twist C26R15 High Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 26 piece, A to Z

Precision Twist C26R15 High Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, Spiral Flute, 118 Degree Point Angle, 26 piece, A to Z - Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set Black and Gold Oxide Finish Round Shank Spiral Flute 135 Degrees Split Point 116 - 14 in 164 increments 932 - 12 in 132 increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments & 9/32″ – 1/2″ in 1/32″ increments

Drillco 400N Series Nitro 21 Piece High-Speed Steel Heavy-Duty Jobber Drill Bit Set, Black and Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/4″ in 1/64″ increments & 9/32″ – 1/2″ in 1/32″ increments - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. Round shanks allow use with a wide variety of toolholding systems. 21 jobber length drill bits ranging in size from 1/16″ to 1/4″ in 1/64″ increments and from 9/32″ to 1/2″ in 1/32″ increments.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.