19 Top Glass Drill Bits

 

BQLZR 15mm Dia Diamond Coated Rotary Sphere Point Burr Jewelry Tools Tipped Glass Drill Bit Pack of 30

BQLZR 1.5mm Dia Diamond Coated Rotary Sphere Point Burr Jewelry Tools Tipped Glass Drill Bit Pack of 30

BQLZR 1.5mm Dia Diamond Coated Rotary Sphere Point Burr Jewelry Tools Tipped Glass Drill Bit Pack of 30 - Grain size150 #. Head type ball. Fit most professional electric drills, best for replace nail drill bits. Package size143 x 6 x 2cm/563 x 236 x 079″(l x w x h). Can be used to various applications including carving, grinding and etching on a variety materials.

 

78 Inch 224 mm DiamondSure Diamond Drill Bit Hole Saw for Glass Tile Granite Ceramic Porcelain Stone

7/8″ Inch 22.4 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone

7/8″ Inch 22.4 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone - Core extraction hole special holes in back of the “bell” allow easy removal of cores or plugs. Bonded diamond grit electroplate bonded diamonds for optimum diamond life. Nickel plated reduces bit friction and heat build-up and inhibits rust. Grooved tip edge provides maximum surface area & increases water “churn” for tip lubrication. Tip lubrication hole provides optimum tip lubrication by allowing water flow in and out of bit.

 

60 Pack Diamond Drill Bit 1mm2mm3mm Jewelry Beach Sea Glass Shells Gemstones Lapidary 20 pcs 1mm2mm3mm

60 Pack Diamond Drill Bit 1mm/2mm/3mm Jewelry Beach Sea Glass Shells Gemstones Lapidary ,20 pcs 1mm/2mm/3mm.

60 Pack Diamond Drill Bit 1mm/2mm/3mm Jewelry Beach Sea Glass Shells Gemstones Lapidary ,20 pcs 1mm/2mm/3mm. - Drills beach sea glass, sea shells, rocks, marbles, etc. Fits drills, flex shafts and dremels. Set of 20 pcs 1mm /2mm/3mm diamond drill bits, 1/8 shank. For making earrings, pendents and bracelets. Used by jewelry designers for drilling clean holes.

 

Drilax 3-12 Inch Diamond Hole Saw Glass Drill Bit

Drilax 3-1/2 Inch Diamond Hole Saw Glass Drill Bit

Drilax 3-1/2 Inch Diamond Hole Saw Glass Drill Bit - Drills 1 inch deep, wet type, do not use dry, no pilot drill bit, pilots are not required. Use with any electric drill, diamond circular hole saw for floor drain, shower, shower mixing valve, shower drain installation. Diamond coated drilling holesaw tool 3 1/2″, larger than 3 inches, smaller than 4 inches. Cuts through ceramic and porcelain tile, glass, marble, granite. Cylindrical shank 3/8″, no need for adapters or arbor.

 

12 Inch 129 mm DiamondSure Diamond Drill Bit Hole Saw for Glass Tile Granite Ceramic Porcelain Stone

1/2″ Inch 12.9 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone

1/2″ Inch 12.9 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone - They are designed to be an inexpensive solution to cleanly and quickly drill in hard and fragile materials where no carbide or other retail drill bit is able. The electroplate bonded diamond drill bits have a superior design developed through extensive testing. Diamond core drill bits are premium specialty drill bits designed for drilling in hard abrasive non-ferrous materials. The patented diamondsure bonded diamond drill bit fills a major gap in the current retail drill bit product lines. Designed for use by d-i-yers, contractors and hobbyists on very hard or fragile materials such as porcelain tile, ceramic tile, stone, ceramics and glass. Water is required for lubrication when drilling. (Not for use on metals, concrete, masonry, or with impact hammer drills). Designed for drilling to depths of about ½”.

 

Diamond Drill Bit Cylindrical Jewelry Beach Sea Glass Shells Gemstones Lapidary 30 Pack 1mm 2mm 3mm18

Diamond Drill Bit Cylindrical Jewelry Beach Sea Glass Shells Gemstones Lapidary 30 Pack. 1mm 2mm 3mm(1/8″)

Diamond Drill Bit Cylindrical Jewelry Beach Sea Glass Shells Gemstones Lapidary 30 Pack. 1mm 2mm 3mm(1/8″) - Used by jewelry designers for drilling clean holes. Packing 10pcs 1mm, 10pcs 2mm, 10pcs 3mm. Wet drilling only. Drills beach sea glass, sea shells, rocks, marbles, etc. 1/8″ (3mm) shank.

 

TOOGOOR Convenient Practical Tile Glass Metal Hole Saw Diamond Core Drill Bit 6mm 14 Cutting Diameter

TOOGOO(R) Convenient Practical Tile Glass Metal Hole Saw Diamond Core Drill Bit 6mm 1/4 Cutting Diameter

TOOGOO(R) Convenient Practical Tile Glass Metal Hole Saw Diamond Core Drill Bit 6mm 1/4 Cutting Diameter - Shank diameter5. Toogoo(r) convenient practical tile glass metal hole saw diamond core drill bit 6mm 1/4 cutting diameterdrilling diameter 6mm / 1/4″. 6cm, 1. 97inch x 0. Package included1 x glass drill bit 6mmnotelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Only authorized seller of toogoo can sell under toogoo listings. Size5cm x 0. Toogoo is a registered trademark. The measurement allowed error is 1-3cm. 24inch. 5mm / 1/5″total length50mm / 2″diamond coated tip and sturdy metal body, gives good performance and longer life. Our products will enhance your experience to unparalleled inspiration.

 

Sonline 4 Piece Ceramic Tile Glass Carbide Coated Drill Bits Set - 4 6 8 10mm

Sonline 4 Piece Ceramic Tile Glass Carbide Coated Drill Bits Set – 4, 6, 8 & 10mm

Sonline 4 Piece Ceramic Tile Glass Carbide Coated Drill Bits Set – 4, 6, 8 & 10mm - Use for ceramic tiles, mirror and glass. Spear pointed design reduces breakout for use with drills that have a 3/8″” or larger chucks. Sized at 4mm, 6mm, 8mm and 10mm. Ideal for drilling fastner holes in bathroom tiles, or wall mirrors. 4 professional quality tile & glass drills.

 

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass 3 8 to 1 Inch 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces

eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces - Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Diamond drill sizes diamond drill set includes 5 diameter of 3/ 8, 1/ 2, 5/ 8, 3/ 4, 1 inch, 5 cm and 55 cm in length, good quality diamond drilling tool set. Clean and accurate hole can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable. Steel and nickel coated material these drill coated hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles, sturdy. Multiple uses hole saw set can be applied on porcelain, glass, tile, ceramics, stone, granite and other hard surfaces, for most common standard electric drillers.

 

1 14 Diamond Core Drill Bit For Glass and Tile  Put 2 in Your Cart Get the Third FREE  Free Beginners Drilling Guide  Youll Drill Glass and Tile  Free Shipping  100  Money Back Guarantee

1 1/4″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee

1 1/4″ Diamond Core Drill Bit For Glass and Tile | Put 2 in Your Cart, Get the Third FREE | Free Beginner’s Drilling Guide | You’ll Drill Glass and Tile | Free Shipping | 100 % Money Back Guarantee - Easy, use your kitchen scrubbing sponge to hold the glass and cool the bit we’ll show you how. 1 1/4″ diamond core bit for glass and tile fits your hand drill or drill press. Free shipping in the us no risk, 100% money back guarantee. You’ll make wine bottle lamps, lighted glass block, bird feeders and more. Free 4 page drilling instruction guide.

 

TEMO 30 pieces Fine Diamond coated burrs glass drill bit GRIT 300 15A8

TEMO 30 pieces Fine Diamond coated burrs glass drill bit GRIT 300 15A8

TEMO 30 pieces Fine Diamond coated burrs glass drill bit GRIT 300 15A8 - Included 1/16″ diamond drill bits in a fine grit, for drilling glass, shells, tile and stone. New one box set of 30 pieces diamond coated burrs / pointed heads in box set they will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet included 1/16″ diamond drill bits in a fine grit, for drilling glass, shells, tile and stone overall length is 40mm to 50mm (1 5/8 inch to 2 inch) shank diameter 317mm (1/8 inch) premium type diamond coated in grit 300 (fine) suitable for glass, marble, rock or jewelry. They will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet shank diameter 317mm (1/8 inch). New one box set of 30 pieces diamond coated burrs with pointed heads in box set. Overall length is 40mm to 50mm (1 5/8 inch to 2 inch).

 

TEMO 30 pieces Coarse Diamond coated burrs glass drill bit GRIT 80 5C1

TEMO 30 pieces Coarse Diamond coated burrs glass drill bit GRIT 80 5C1

TEMO 30 pieces Coarse Diamond coated burrs glass drill bit GRIT 80 5C1 - New one box set of 30 pieces diamond coated burrs with pointed heads in box set. New one box set of 30 pieces diamond coated burrs / pointed heads in box set they will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet included 1/16″ diamond drill bits in a coarse grit, for drilling glass, shells, tile and stone overall length is 40mm to 50mm (1 5/8 inch to 2 inch) shank diameter 317mm (1/8 inch) premium type diamond coated in grit 80 (coarse) suitable for glass, marble, rock or jewelry. They will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet shank diameter 317mm (1/8 inch). Included 1/16″ diamond drill bits in a coarse grit, for drilling glass, shells, tile and stone. Overall length is 40mm to 50mm (1 5/8 inch to 2 inch).

 

TEMO 30 pieces Medium Diamond coated burrs glass drill bit GRIT 120 15A9

TEMO 30 pieces Medium Diamond coated burrs glass drill bit GRIT 120 15A9

TEMO 30 pieces Medium Diamond coated burrs glass drill bit GRIT 120 15A9 - New one box set of 30 pieces diamond coated burrs with pointed heads in box set. They will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet shank diameter 317mm (1/8 inch). Included 1/16″ diamond drill bits in a medium grit, for drilling glass, shells, tile and stone. New one box set of 30 pieces diamond coated burrs / pointed heads in box set they will fit your hand drill, drill press & your dremel and foredom tool with a 1/8″ collet included 1/16″ diamond drill bits in a medium grit, for drilling glass, shells, tile and stone overall length is 40mm to 50mm (1 5/8 inch to 2 inch) shank diameter 317mm (1/8 inch) premium type diamond coated in grit 120 (medium) suitable for glass, marble, rock or jewelry. Overall length is 40mm to 50mm (1 5/8 inch to 2 inch).

 

BQLZR 3mm Diameter Sphere Point Diamond Coated Burrs Glass Drill Bit for Die Grinder Pack of 30

BQLZR 3mm Diameter Sphere Point Diamond Coated Burrs Glass Drill Bit for Die Grinder Pack of 30

BQLZR 3mm Diameter Sphere Point Diamond Coated Burrs Glass Drill Bit for Die Grinder Pack of 30 - Can be used to various applications including carving, grinding and etching on a variety materials. Note the color of the item may vary slightly due to photography and your own computer feature diamond coated bur set with 3mm shanks bits come in standard size to satisfy any technology. 63 x 2. 79″(l x w x h) weight114g package include 30 x diamond coated burrs glass drill bit. Specification materialdiamond,metal colorsilver head type ball shank diameter3mm head diameter3mm grain size150 # length45mm package size14. Fit most professional electric drills, best for replace nail drill bits. 36 x 0. 3 x 6 x 2cm/5.

 

30 Pack 1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones Lapidary 30pcs 1mm

30 Pack 1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones Lapidary 30pcs. 1mm

30 Pack 1mm Diamond Drill Bit Jewelry Beach Sea Glass Shells Gemstones Lapidary 30pcs. 1mm - These bits are a very popular type and size used by jewelry designers for drilling a nice clean hole in beach sea glass for making earrings, pendents and bracelets. Drills beach sea glass, sea shells, rocks, marbles,etc. 1mm diamond drill bits, 1/8 shank. These bits can be used in any high speed dremel-type rotary tool or small precision drill press with a 3/32″ collet or adjustable collet. Set of 30 pcs. Wet drilling only. Used by jewelry designers for drilling clean holes fits drills ,bracelets and flex shafts. They have multiple layers of industrial diamond particles bonded to the tips which provides for longer drill life and are excellent for drilling completely through any thickness of beach sea glass up to 1/2″ thick.

 

Yosoo 16pcsSet Diamond Coated Drill Bit Hole Saw Set 6-50mm Wet Use for Tiles Glass Fish Tanks Marble Granite Ceramic

Yosoo 16pcs/Set Diamond Coated Drill Bit Hole Saw Set 6-50mm, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic

Yosoo 16pcs/Set Diamond Coated Drill Bit Hole Saw Set 6-50mm, Wet Use for Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic - Easy to use, high quality,good performance, long life, excellent for making clean and accurate hol. Can be used with a standard electric drill( excluding in this item ). This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite, cer. Size6mm, 8mm, 10mm, 12mm, 14mm,16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm,45mm, 50mm. Do not run dry diamond coated tools will work best if you use water to keep the tools cool.

 

1-34 447 mm DiamondSure Diamond Drill Bit Hole Saw for Glass Tile Granite Ceramic Porcelain Stone

1-3/4″ 44.7 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone

1-3/4″ 44.7 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Porcelain, Stone - Tip lubrication hole provides optimum tip lubrication by allowing water flow in and out of bit. Core extraction hole special holes in back of the “bell” allow easy removal of cores or plugs. Bonded diamond grit electroplate bonded diamonds for optimum diamond life. Grooved tip edge provides maximum surface area & increases water “churn” for tip lubrication. Nickel plated reduces bit friction and heat build-up and inhibits rust.

 

Vermont American 13307 Glass and Tile Drill Bit 12-Inch by 3-34-Inch

Vermont American 13307 Glass and Tile Drill Bit, 1/2-Inch by 3-3/4-Inch

Vermont American 13307 Glass and Tile Drill Bit, 1/2-Inch by 3-3/4-Inch - For use with drills that have 3/8 in or larger chuck. Provides smooth, accurate drilling in ceramic tile, mirrors, glass, marble & china. Spear pointed tip reduces breakage.

 

uxcell 6mm Dia Spear Point Head Ceramic Marble Tile Glass Drill Bit 10pcs

uxcell 6mm Dia Spear Point Head Ceramic Marble Tile Glass Drill Bit 10pcs

uxcell 6mm Dia Spear Point Head Ceramic Marble Tile Glass Drill Bit 10pcs - Net weight 121g package content 10pcs x glass drill bit. Material metal , carbide type spear tip. Color silver tone, gray. Product name glass drill bit shank diameter 45mm/ 018″. Tip size 6mm/024″ total length 73mm/ 29″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.