19 Coolest Spreader Bars

 

Mail Boss 7143 3 Box Spreader Bar

Mail Boss 7143 3 Box Spreader Bar

Mail Boss 7143 3 Box Spreader Bar - Made of 12-gauge galvanized steel, the spreader bar provides a sturdy multi-unit solution. Features powder-coated finish. . Compatible with mail boss mounting posts and most existing posts. The 3 box spreader bar allows you to mount three (3) mail boss locking security mailboxes on one post.

 

Prime-Line Screen Spreader Bar 58 Bronze Bronze Finish 72 L Bulk

Prime-Line Screen Spreader Bar 5/8″ Bronze Bronze Finish 72″ L Bulk

Prime-Line Screen Spreader Bar 5/8″ Bronze Bronze Finish 72″ L Bulk - 72″ length. 025 bronze features center support bar for window screens. Used to prevent frame bow on screens or larger spans. Prime line pl 14140 spreader bar 5/8″ x 72″ x. Bronze finish.

 

3M DBI-SALA 1231460 RescueRetrieval Y-Lanyard 2 with Spreader Bar D-Ring At Center and Snap Hooks At Leg Ends Navy

3M DBI-SALA 1231460 Rescue/Retrieval Y-Lanyard, 2′ with Spreader Bar, D-Ring At Center and Snap Hooks At Leg Ends, Navy

3M DBI-SALA 1231460 Rescue/Retrieval Y-Lanyard, 2′ with Spreader Bar, D-Ring At Center and Snap Hooks At Leg Ends, Navy - Rescue and retrieval “y” design. Built-in rfid identification tag provides a way to record and store information on inspections. Rugged construction endures rough use, standing up to long periods of outdoor elements including sun exposure without tearing or fraying for added longevity. Attaches to shoulder d-rings of harness to help facilitate a rescue from a confined space, keeping the victim in a vertical position. 2-feet in length. Easy to use self locking snap hooks at ends. Dee ring in centre with spreader bar. 2 ft (06 m) rescue/retrieval y-lanyard with spreader bar, d-ring at center and snap hooks at leg ends. 1-3/4-inch polyester constructed webbing for added durability. Automatically locks and closes for added safety, and allow you to open and connect without getting your thumb or fingers in the way, even with gloves on.

 

Work Seat 12x24 Built-in Harness with Spreader Bar and Yoke

Work Seat, 12″x24″, Built-in Harness with Spreader Bar and Yoke.

Work Seat, 12″x24″, Built-in Harness with Spreader Bar and Yoke. - Additional waist strap for added security. Build-in harness. Plywood work seat, 12″x24″, includes built-in harness with spreader bar and yoke. Hardware plated to astm standards for corrosion resistance. 12 x 24 plywood work seat. Spreader bar and yoke with top d-ring for suspension.

 

Mail Boss 3-Box Spreader Bar

Mail Boss 3-Box Spreader Bar

Mail Boss 3-Box Spreader Bar - This easy attachment provides secure mounting for up to 3 mail boss boxes on a single mail boss pole. Mount 3 locking mail boss boxes on a single pole. 12-gauge galvanized steel construction. Black powder-coated finish. Mount up to 4 mail boss locking boxes on the mail boss 3-box spreader bar. About mail boss the president of mail boss had his business and personal mail stolen 3 times in 2005, and didn’t take it lying down. Mail boss was introduced a year later, and today offers the most advanced tamper-proof and destruction-proof build on the market. Unable to find a product he trusted, he set out to design the world’s most secure mailbox. Holes to screw in 3 individual boxes. Dimensions 34l x 5w x 2h inches.

 

Mail Boss 7144 2 Box Spreader Bar

Mail Boss 7144 2 Box Spreader Bar

Mail Boss 7144 2 Box Spreader Bar - Features powder-coated finish. Compatible with mail boss mounting posts and most existing posts. . The 2 box spreader bar allows you to mount two (2) mail boss locking security mailboxes on one post. Made of 12-gauge galvanized steel, the spreader bar provides a sturdy multi-unit solution.

 

Prime-Line Products PL 7794 Spreader Bar Clips 58-Inch Mill by Prime-Line Products

Prime-Line Products PL 7794 Spreader Bar Clips, 5/8-Inch, Mill by Prime-Line Products

Prime-Line Products PL 7794 Spreader Bar Clips, 5/8-Inch, Mill by Prime-Line Products - This product is manufactured in chinashould not be weldedspreader bar clipstamped aluminum clips inserted into the ends of 5/8 spreader bars & set into a built screen frameprevents bowing in oversized framesclip fits onto spline channelfits 5/8in spreader bar.

 

Bronze 58 x 516 Roll Formed Aluminum Spreader Bar

Bronze 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar

Bronze 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar - 7 m)packing charge $7. 002 inch (. Wsc112 spreader bar clips. Installs with our cat. 00 for orders of fewer than 12 stock length of screen frameprevents screen frame from bowing ineasy-to-installthree finishes to choose fromcrl 5/8″ x 5/16″ (15. 025 mil (. 9 mm) box type spreader bar is made of. 9 x 7. Adds rigidity and strength to large size screens. Important notesbecause of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus. This is standard in the industry. 05 millimeter). 64 mm) thickness roll formed aluminum. Almost always installed across the mid-point of the screen’s longest side. Color bronzelength 12′-2″ (3. No.

 

Prime-Line Products PL 7794 Spreader Bar Clips 58-Inch MillPack of 6

Prime-Line Products PL 7794 Spreader Bar Clips, 5/8-Inch, Mill,(Pack of 6)

Prime-Line Products PL 7794 Spreader Bar Clips, 5/8-Inch, Mill,(Pack of 6) - Clip fits onto spline channel. Fits 5/8in spreader bar. Stamped aluminum clips inserted into the ends of 5/8 spreader bars & set into a built screen frame. Spreader bar clip. Should not be welded. This product is manufactured in china. Prevents bowing in oversized frames.

 

Prime-line Spreader Bar Clips

Prime-line Spreader Bar Clips

Prime-line Spreader Bar Clips - Insert clip into spreader bar and clip onto screen frame. Mill finish. 5/8″ wide. Use to attach spreader bar in screen frames. Spline holds the clip in place.

 

Prime-line Spreader Bar Clips by Prime-Line

Prime-line Spreader Bar Clips by Prime-Line

Prime-line Spreader Bar Clips by Prime-Line - 5/8 wideuse to attach spreader bar in screen framesinsert clip into spreader bar and clip onto screen framespline holds the clip in placemill finish.

 

Gray 58 x 516 Roll Formed Aluminum Spreader Bar

Gray 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar

Gray 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar - 9 mm) box type spreader bar is made of. Almost always installed across the mid-point of the screen’s longest side. 00 for orders of fewer than 12 stock length of screen frameprevents screen frame from bowing ineasy-to-installthree finishes to choose fromcrl 5/8″ x 5/16″ (15. Wsc112 spreader bar clips. Adds rigidity and strength to large size screens. 002 inch (. 9 x 7. Installs with our cat. 05 millimeter). 7 m)packing charge $7. Color graylength 12′-2″ (3. 64 mm) thickness roll formed aluminum. Important notesbecause of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus. No. 025 mil (. This is standard in the industry.

 

Dakine Stainless Spreader Bar 12in 30cm

Dakine Stainless Spreader Bar 12in (30cm)

Dakine Stainless Spreader Bar 12in (30cm) - Marine grade non corrosive stainless steel constructioneasy in, easy out hook shapeergonomically designed spreader barmarine grade non corrosive stainless steel construction.

 

SPREADER BAR 58 ALMOND CASE OF 50

SPREADER BAR 5/8″ ALMOND CASE OF 50

SPREADER BAR 5/8″ ALMOND CASE OF 50 - 025 gauge adds extra support to large size screens for improved rigidity and strength typically installed across the mid-range of the screen’s longest side. “prime-line products” spreader bar 5/8″w x 12’h almond finish .

 

Magliner Convertible Gemini Replacement Part Spreader Bar Clamp 302064

Magliner Convertible Gemini Replacement Part Spreader Bar Clamp 302064

Magliner Convertible Gemini Replacement Part Spreader Bar Clamp 302064 - Sold individually. For attaching spreader bar to screen frame. Non-marring, replaceable stay-on pads heat-treated black oxide bar. Quick-clip feature on jaw converts clamp into a spreader quickly and easily no tools required. 24-inch bar clamp and spreader with multi-positioning jaws.

 

Allegro Industries 940131 Spreader Bar Magnetic Lid Lifter

Allegro Industries 940131 Spreader Bar, Magnetic Lid Lifter

Allegro Industries 940131 Spreader Bar, Magnetic Lid Lifter - Bar hangs onto existing dolly without need to assemble. Is an accessory for allegro’s lid lifter. Allows use of two magnets simultaneously.

 

Spreader Bar Bonus

Spreader Bar Bonus

Spreader Bar Bonus - The spreader bar is made with 1/4″ powder-coated steel and is 14 3/4″ long. The space between the wheels on the double wheel hoe allows you to straddle small plants (up to 6″) and work both sides of the row in one pass. The 6″ oscillating hoes have a sharpened, spring steel blade and a powder-coated steel frame. Works great for weeding small corn, bean and pea plants to manage weeds before plants are mature enough to shade out further weed growth. Simply attach the spreader bar to the tool bar of the hoss double wheel hoe, then attach the 6″ oscillating hoes on each side of the spreader bar. It also works great for green crops like spinach that remain small and low to the ground. The spreader bar bonus includes our spreader bar extension and 6″ oscillating hoes.

 

B P Hand Truck Convertible Spreader Bar Replacement Part 2002-125

B & P Hand Truck Convertible Spreader Bar Replacement Part 2002-125

B & P Hand Truck Convertible Spreader Bar Replacement Part 2002-125 - Height inches, 72. Wiidth inches, 5/8. Description, screen frame. Manufacturer’s part number, pl 14140. Brand, prime-line products.

 

Bronze 58 x 516 Roll Formed Aluminum Spreader Bar

Bronze 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar

Bronze 5/8″ x 5/16″ Roll Formed Aluminum Spreader Bar - 00 for orders of fewer than 12 stock length of screen frameprevents screen frame from bowing ineasy to installseveral finishes to choose fromcrl 5/8″ x 5/16″ roll formed aluminum spreader bar is made of 25 mil (. 66 m)packing charge $7. 05 millimeter). Color bronzelength 12′ (3. This is standard in the industry. Adds rigidity and strength to large size screens. 025″)thickness roll formed aluminum. Installs with our catalog number wsc112 spreader bar clips. 002 inch (. Important notesbecause of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus. Almost always installed across the mid-point of the screen’s longest side.