19 Best Inlay Router Bits

 

StewMac Carbide Downcut Inlay Router Bit 132 079mm diameter

StewMac Carbide Downcut Inlay Router Bit, 1/32″ (0.79mm) diameter

StewMac Carbide Downcut Inlay Router Bit, 1/32″ (0.79mm) diameter - Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Solid carbide lasts far longer than steel. Comes in sturdy protective case, with bit cutting diamater size clearly marked. For fine detail inlay routing. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm).

 

Bosch 85653M 116-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85653M 1/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85653M 1/16-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85658M 316-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank by Bosch

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by Bosch

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by Bosch - Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.

 

Bosch 85658M 316-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85658M 3/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Bosch 85650M 116-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85650M 1/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85650M 1/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

StewMac Carbide Downcut Inlay Router Bit 332 238mm diameter

StewMac Carbide Downcut Inlay Router Bit, 3/32″ (2.38mm) diameter

StewMac Carbide Downcut Inlay Router Bit, 3/32″ (2.38mm) diameter - Comes in sturdy protective case, with bit cutting diamater size clearly marked. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Solid carbide lasts far longer than steel. For inlay routing and bridge saddle slots.

 

Bosch 85657M 18-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85657M 1/8-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85657M 1/8-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Freud 85-019 14-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Style 85-019 14-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Model 85-019

Freud 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-019

Freud 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-019 1/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-019 - . Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. Ideal for decorative inlay work in solid surface countertops.

 

Bosch 85654M 18-Inch Depth 12-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85654M 1/8-Inch Depth 1/2-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Freud 85-031 34-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Style 85-031 34-Inch x 316-Inch Inlay Router Bit with 12-Inch Shank Model 85-031

Freud 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-031

Freud 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-031 3/4-Inch x 3/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-031 - Application cuts all solid surface materials, hardwood and other composite materials. Ideal for decorative inlay work in solid surface countertops. . Use on hand-held portable routers.

 

Bosch 85656M 116-Inch Depth 34-Inch Cut Face Inlay Router Bit 12-Inch Shank

Bosch 85656M 1/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank

Bosch 85656M 1/16-Inch Depth 3/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

Freud 85-017 14-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Style 85-017 14-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Model 85-017

Freud 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-017

Freud 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-017 1/4-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-017 - Ideal for decorative inlay work in solid surface countertops. . Use on hand-held portable routers. Application cuts all solid surface materials, hardwood and other composite materials.

 

Freud 85-015 14-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Style 85-015 14-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Model 85-015

Freud 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-015

Freud 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-015 1/4-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-015 - Application cuts all solid surface materials, hardwood and other composite materials. Ideal for decorative inlay work in solid surface countertops. Use on hand-held portable routers.

 

Freud 85-021 12-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Style 85-021 12-Inch x 116-Inch Inlay Router Bit with 12-Inch Shank Model 85-021

Freud 85-021 1/2-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-021 1/2-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-021

Freud 85-021 1/2-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-021 1/2-Inch x 1/16-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-021 - Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. . Ideal for decorative inlay work in solid surface countertops.

 

Face Inlay Router Bits solid surface - CD 78  CL 38  DP 116  B SBE120

Face Inlay Router Bits (solid surface) – CD 7/8 | CL 3/8 | DP 1/16 | B SBE120

Face Inlay Router Bits (solid surface) – CD 7/8 | CL 3/8 | DP 1/16 | B SBE120 - Add an sbe124 bearing and it can be used for flush trimming if needed. Legend below explains sizing. Select your item(s) then click add to cart. For solid surface applications, this face inlay router bit is carbide-tipped and will provide for many years service. These solid surface bits are manufactured in the usa. All bits have a 1/2 inch shank. By southeast tool and are new and improved.

 

Magnate 1159 Face-Inlay Router Bits - 34 Cutting Height 3-12 Overall Length

Magnate 1159 Face-Inlay Router Bits – 3/4″ Cutting Height; 3-1/2″ Overall Length

Magnate 1159 Face-Inlay Router Bits – 3/4″ Cutting Height; 3-1/2″ Overall Length - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. E. It is suited for softwoods, hardwoods, chipboard, plywood and etc. By replacing the original bearing, br-05, the rabbet depth varies as following original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ this carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. The cutting depth of all bits is 1/8″. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Used for inlaying wood veneer, and other material i. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. You may try the following suggestion. Brass.

 

Bosch 85652M 316-Inch Depth 14-Inch Cut Face Inlay Router Bit 12-Inch Shank by BOSCH

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH

Bosch 85652M 3/16-Inch Depth 1/4-Inch Cut Face Inlay Router Bit 1/2-Inch Shank by BOSCH - Recommended for use with a routing tableall bits must be inserted in the full length of the collet. Be sure to use only router bits and accessories specifically designed for your router.

 

Freud 85-023 12-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Style 85-023 12-Inch x 18-Inch Inlay Router Bit with 12-Inch Shank Model 85-023

Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023

Freud 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Style: 85-023 1/2-Inch x 1/8-Inch Inlay Router Bit with 1/2-Inch Shank Model: 85-023 - Application cuts all solid surface materials, hardwood and other composite materials. Use on hand-held portable routers. . Ideal for decorative inlay work in solid surface countertops.

 

Magnate 1173 Side Face-Inlay Router Bits - 14 Cutting Height 5 Shank Length

Magnate 1173 Side Face-Inlay Router Bits – 1/4″ Cutting Height; 5″ Shank Length

Magnate 1173 Side Face-Inlay Router Bits – 1/4″ Cutting Height; 5″ Shank Length - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. By replacing the original bearing, br-05, the rabbet depth varies as follows original bearingbr-05 cutting depth matrix br-08 br-05 br-04 1/8″ 1/16″ 1/8″ 3/16″ shank length is measured from middle of the knife to the end of the shank. In case a bit doesn’t come with a speed chart. The cutting depth of all bits is 1/8″. Bow front drawer. E. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Used for inlaying wood veneer, and other materials i. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Brass on either spindle stock up to 8″ in diameter, or flat stock up to 4″ wide that has a curved profile i. Designed for the legacy ornamental mill. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. E.