19 Best and Coolest Masonry Fasteners

 

5 38 Plastic Masonry Fastener 200 pcs

5 3/8″ Plastic Masonry Fastener (200 pcs.)

5 3/8″ Plastic Masonry Fastener (200 pcs.) - For use when attaching rigid continuous insulation to concrete / masonry substrates. For foam thicknesses 3 1/2″, 4″. Available in multiple lengths. 2-3/8″ head sits flush on insulation. Pre-drill hole with 5/16″ masonry bit.

 

316 X 3-34 ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING - 516 HEX HEAD - BOX QUANTITY 100 -532 X 3-12 MASONRY DRILL BIT

3/16 X 3-3/4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -5/32″ X 3-1/2 MASONRY DRILL BIT

3/16 X 3-3/4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -5/32″ X 3-1/2 MASONRY DRILL BIT - 3/16 x 3-3/4″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -5/32″ x 3-1/2 masonry drill bit.

 

Universal 801474 Tapcon Masonry Fasteners Flat Phillips Head 14 Diameter x 3-14

Universal 801474 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 3-1/4″

Universal 801474 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 3-1/4″ - An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point. Sold with a drill bit. Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor.

 

14 X 5 ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING - 516 HEX HEAD - BOX QUANTITY 100 -316 X 7-12 MASONRY DRILL BIT

1/4 X 5″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 7-1/2 MASONRY DRILL BIT

1/4 X 5″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 7-1/2 MASONRY DRILL BIT - 1/4 x 5″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -3/16″ x 7-1/2 masonry drill bit.

 

Universal 801473 Tapcon Masonry Fasteners Flat Phillips Head 14 Diameter x 2-34

Universal 801473 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 2-3/4″

Universal 801473 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 2-3/4″ - Sold with a drill bit. Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point.

 

Universal 801486 Tapcon Masonry Fasteners Slotted Hex 316 Diameter x 1-34

Universal 801486 Tapcon Masonry Fasteners, Slotted Hex 3/16″ Diameter x 1-3/4″

Universal 801486 Tapcon Masonry Fasteners, Slotted Hex 3/16″ Diameter x 1-3/4″ - Sold with a drill bit. . Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point.

 

14 X 3-34 ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING - 2 PHILLIPS - BOX QUANTITY 100 -316 X 5-12 MASONRY DRILL BIT

1/4 X 3-3/4″ ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – #2 PHILLIPS – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT

1/4 X 3-3/4″ ULTRACON PHILLIPS FLAT HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – #2 PHILLIPS – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT - 1/4 x 3-3/4″ ultracon phillips flat head carbon steel masonry fasteners for concrete -blue stalgard coating, #2 phillips, box quantity 100 -3/16″ x 5-1/2 masonry drill bit.

 

2 Plastic Masonry Fastener 250 pcs

2″ Plastic Masonry Fastener (250 pcs.)

2″ Plastic Masonry Fastener (250 pcs.) - Available in multiple lengths. Pre-drill hole with 5/16″ masonry bit. For use when attaching rigid continuous insulation to concrete / masonry substrates. 2-3/8″ head sits flush on insulation. For foam thicknesses 1/2″, 1″.

 

14 X 4 ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING - 516 HEX HEAD - BOX QUANTITY 100 -316 X 5-12 MASONRY DRILL BIT

1/4 X 4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT

1/4 X 4″ ULTRACON SLOTTED HEX WASHER HEAD CARBON STEEL MASONRY FASTENERS FOR CONCRETE -BLUE STALGARD COATING – 5/16 HEX HEAD – BOX QUANTITY 100 -3/16″ X 5-1/2 MASONRY DRILL BIT - 1/4 x 4″ ultracon slotted hex washer head carbon steel masonry fasteners for concrete -blue stalgard coating, 5/16 hex head, box quantity 100 -3/16″ x 5-1/2 masonry drill bit.

 

Greenlee LE435 1875-Inch by 125-Inch Tapcon Masonry Fasteners and Drill Bit 100-Pack

Greenlee LE435 .1875-Inch by 1.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack

Greenlee LE435 .1875-Inch by 1.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack - All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Simple two-step operation, drill, then drive, eliminates the need to set anchors. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength. Each box contains one drill bit. Fasteners can be removed and reinserted in the same hole.

 

Universal 801471 Tapcon Masonry Fasteners Flat Phillips Head 14 Diameter x 1-34

Universal 801471 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 1-3/4″

Universal 801471 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 1-3/4″ - Sold with a drill bit. Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point.

 

Universal 818140 Phillips Flat Head Masonry Fasteners 316 x 3-14 Pack of 100

Universal 818140 Phillips Flat Head Masonry Fasteners, 3/16″ x 3-1/4″ (Pack of 100)

Universal 818140 Phillips Flat Head Masonry Fasteners, 3/16″ x 3-1/4″ (Pack of 100) - Grade 2. . With this product you will be able to solve all of your problems and at the best available quality. Zinc plated steel.

 

Universal 801472 Tapcon Masonry Fasteners Flat Phillips Head 14 Diameter x 2-14

Universal 801472 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 2-1/4″

Universal 801472 Tapcon Masonry Fasteners, Flat Phillips Head 1/4″ Diameter x 2-1/4″ - An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point. Sold with a drill bit. Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor.

 

3 12Plastic Masonry Fastener 50 pcs

3 1/2″Plastic Masonry Fastener (50 pcs.)

3 1/2″Plastic Masonry Fastener (50 pcs.) - Pre-drill hole through insulation and into concrete/block substrate with 5/16″ masonry bit. 2-3/8″ head sits flush on insulation. . Available in multiple lengths. For foam thicknesses of 1 1/2-2″. For use when attaching rigid continuous insulation to concrete / masonry substrates.

 

HODELL-NATCO INDUSTRIES 50022 PHILLIPS FLAT HEAD MASONRY FASTENERS 14 IN X 34 IN 100 PER PACK 1PK

HODELL-NATCO INDUSTRIES 50022 PHILLIPS FLAT HEAD MASONRY FASTENERS 1/4 IN. X 3/4 IN., 100 PER PACK (1/PK)

HODELL-NATCO INDUSTRIES 50022 PHILLIPS FLAT HEAD MASONRY FASTENERS 1/4 IN. X 3/4 IN., 100 PER PACK (1/PK) - 1/4 x 3-3/4. Hillman tapper masonry fastener. Boxed/100. Use with tapper 1000 installation tool and an tapper bit. Phillips flat head.

 

Greenlee LE425 25-Inch by 225-Inch Tapcon Masonry Fasteners and Drill Bit 100-Pack

Greenlee LE425 .25-Inch by 2.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack

Greenlee LE425 .25-Inch by 2.25-Inch Tapcon Masonry Fasteners and Drill Bit, 100-Pack - Simple two-step operation, drill, then drive, eliminates the need to set anchors. Fasteners can be removed and reinserted in the same hole. All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Each box contains one drill bit. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength.

 

Hillman Hex Tapper Masonry Fasteners 14  X 2-34  Hex Head Slotted 100Box

Hillman Hex Tapper Masonry Fasteners 1/4 ” X 2-3/4 ” Hex Head Slotted 100/Box

Hillman Hex Tapper Masonry Fasteners 1/4 ” X 2-3/4 ” Hex Head Slotted 100/Box - All tapcon fasteners are protected against rust and corrosion by the exclusive stalgard finish. Simple two-step operation, drill, then drive, eliminates the need to set anchors. Tapcon fasteners and the masonry material are mechanically linked for exceptionally strong pullout strength. Each box contains one drill bit. Fasteners can be removed and reinserted in the same hole.

 

Universal 801477 Tapcon Masonry Fasteners Flat Phillips Head 316 Diameter x 2-14

Universal 801477 Tapcon Masonry Fasteners, Flat Phillips Head 3/16″ Diameter x 2-1/4″

Universal 801477 Tapcon Masonry Fasteners, Flat Phillips Head 3/16″ Diameter x 2-1/4″ - Cuts its own threads and when used in concrete, block, or brick, eliminates the need for an anchor. Sold with a drill bit. An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond shaped, nail type point.

 

Hillman Tapper Masonry Fastener 14  X 3-34  Flat Head Phillips Blue 100Box

Hillman Tapper Masonry Fastener 1/4 ” X 3-3/4 ” Flat Head Phillips Blue 100/Box

Hillman Tapper Masonry Fastener 1/4 ” X 3-3/4 ” Flat Head Phillips Blue 100/Box - Hillman tapper masonry fastener. Use with tapper 1000 installation tool and an tapper bit. Phillips flat head. 1/4 x 3-3/4. Boxed/100.