18 Top Square Nose End Mills

 

CGC Tools CEM316F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 316 Diameter 58 LOC 2 OAL

CGC Tools CEM316F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/16″ Diameter, 5/8″ LOC, 2″ OAL

CGC Tools CEM316F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 3/16″ Diameter, 5/8″ LOC, 2″ OAL - Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.

 

YG-1 E5976 Carbide Square Nose End Mill Extra Long Reach Uncoated Bright Finish 37 Deg Helix 2 Flutes 5 Overall Length 0625 Cutting Diameter 0625 Shank Diameter

YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 5″ Overall Length, 0.625″ Cutting Diameter, 0.625″ Shank Diameter

YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 5″ Overall Length, 0.625″ Cutting Diameter, 0.625″ Shank Diameter - Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Suitable for high-performance machining and step milling on aluminum and other nonferrous materials. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Long-reach end mills have an extended shank for access to recessed areas of the workpiece.

 

Precision Twist E6304 Carbide Square Nose End Mill Long Reach Uncoated Bright Finish 30 Deg Helix 4 Flutes 6 Overall Length 12 Cutting Diameter 12 Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter

Precision Twist E6304 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6″ Overall Length, 1/2″ Cutting Diameter, 1/2″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Four flutes produce a better finish than fewer flutes. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Extra-long length end mills have longer cutting edges and can make deeper cuts than long-length end mills.

 

YG-1 E5977 Carbide Square Nose End Mill Extra Long Reach TiCN Monolayer Finish Finishing Cut Non-Center Cutting 37 Deg Helix 3 Flutes 4 Overall Length 025 Cutting Diameter 025 Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, TiCN Monolayer Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4″ Overall Length, 0.25″ Cutting Diameter, 0.25″ Shank Diameter - Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than uncoated tools. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures. Suitable for high-performance machining on aluminum and other nonferrous materials. Extended-reach neck style provides access to recessed areas of the workpiece. 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix.

 

Niagara Cutter N61645 Carbide Square Nose End Mill Inch TiCN Finish Roughing and Finishing Cut 45 Degree Helix 3 Flutes 25 Overall Length 0375 Cutting Diameter 0375 Shank Diameter

Niagara Cutter N61645 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

Niagara Cutter N61645 Carbide Square Nose End Mill, Inch, TiCN Finish, Roughing and Finishing Cut, 45 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter - 45-degree helix provides the efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers the abrasion resistance required to machine aluminum and other nonferrous materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

 

CGC Tools CEM14F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - Extremely versatile in various materials, center cutting, solid sub-micron carbide. Usa, flat, 3 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length, ticn coating. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. This weapon of mass production destroy any competition.

 

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Finishing Cutting Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 0500 Shank Diameter

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Finishing Cutting, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter

Niagara Cutter N46890 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Finishing Cutting, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.500″ Shank Diameter - Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Non-center-cutting design supports peripheral milling and finishing.

 

CGC Tools CEM14F2 Primate Square Nose End Mill 2 Flute 14 Diameter 34 LOC 2-12 OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL

CGC Tools CEM14F2 Primate Square Nose End Mill, 2 Flute, 1/4″ Diameter, 3/4″ LOC, 2-1/2″ OAL - This weapon of mass production destroy any competition. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Usa, flat, 2 flute, 1/4” diameter, 3/4” length of cut, 2-1/2” overall length. Extremely versatile in various materials, center cutting, solid sub-micron carbide.

 

Niagara Cutter N35248 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 4125 OAL 0766 Cut Diameter 075 Shank Diameter

Niagara Cutter N35248 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 4.125″ OAL, 0.766″ Cut Diameter, 0.75″ Shank Diameter

Niagara Cutter N35248 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 4.125″ OAL, 0.766″ Cut Diameter, 0.75″ Shank Diameter - High-speed steel is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills.

 

Wokesi Pack of 34 6 8mm Blade DiameterExtra Long4FlutesTiAlN CoatedSolid Tungsten steelSquare Nose End MillCNC Router Bits4mm6mm8mm Long HRC45

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45)

Wokesi Pack of 3,4 6 8mm Blade Diameter,Extra Long,4Flutes,TiAlN Coated,Solid Tungsten steel,Square Nose End Mill,CNC Router Bits(4mm+6mm+8mm Long, HRC45) - Contains 3pcs4mm4mmshank75mmoal,6mm6mmshank75mmoal,8mm8mmshank100mmoal. Materialtungsten carbide,high quality tialn coating,getting long tool life. High micro hardness,high abrasion resistance,good toughnesscan be high-speed processing. Package 1 pack of 3 pieces endmill cutter. Suitable for process alloy,iron and steel under hrc45(hra73)high performance.

 

Niagara Cutter N85267 Carbide Square Nose End Mill Inch Uncoated Bright Finish Roughing and Finishing Cut 30 Degree Helix 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Niagara Cutter N85267 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.

 

Niagara Cutter N39240 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish Roughing and Finishing Cutting 30-Degree 4-Flute 3 OAL 0750 Cut Diameter 0750 Shank Diameter

Niagara Cutter N39240 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter

Niagara Cutter N39240 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter - Square shape offers edge strength and is suitable for roughing, facing, interrupted cuts, and large lead angles. Positive single-sided insert with 7-degree clearance angle for light cutting forces and side clearance. Roughing (kr) and medium-machining (km) chipbreaker styles help prevent chip buildup at a range of cutting depths and feed rates. H13a uncoated carbide grade provides a balance of hardness and toughness for resistance to wear and shock. Designed for turning operations, roughing to medium machining — on aluminum in average machining conditions.

 

CGC Tools CEM18F3TICN Primate Square Nose End Mill TiCN Coating 3 Flute 18 Diameter 12 LOC 1-12 OAL

CGC Tools CEM18F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL

CGC Tools CEM18F3TICN Primate Square Nose End Mill, TiCN Coating, 3 Flute, 1/8″ Diameter, 1/2″ LOC, 1-1/2″ OAL - Usa, flat, 3 flute, 1/8” diameter, 1/2” length of cut, 1-1/2” overall length, ticn coating. This weapon of mass production destroy any competition. Extremely versatile in various materials, center cutting, solid sub-micron carbide. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable.

 

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 532 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32″ 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass

Enpointâ„¢ TiAlN Coated Stainless Cutting Ultra-fine Submicron Carbide 2-Flute Square Nose End Mill 5/32″ 4mm Shank 4mm Cut Width CNC Metalworking Milling Cutter for Aluminum Iron Brass - Coated with ti-al-x-n can cut hard materials and keeps longer tool life sharp cutting edge produces an excellent surface finish. Center cutting for straight plunging or ramping down into the workpiece. 2 flutes allow for higher feedrates and large chip clearance to prevent chips sticking in the flutes. Produced from a premium, ultra-fine solid carbide for maximum tool strength and durability. Mainly suitable for milling materials from soft plastics to tough aerospace alloys including aluminum, stainless steel, mold and alloy steels, inconel, hastelloy and titanium.

 

Niagara Cutter N35160 High Speed Steel Square Nose End Mill Weldon Shank TiN Finish RoughingFinishing Cut Non-Center 30-Degree 4-Flute 325 OAL 0500 Cut Diameter 05000 Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter

Niagara Cutter N35160 High Speed Steel Square Nose End Mill, Weldon Shank, TiN Finish, Roughing/Finishing Cut, Non-Center, 30-Degree, 4-Flute, 3.25″ OAL, 0.500″ Cut Diameter, 0.5000″ Shank Diameter - Titanium nitride (tin) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.

 

Niagara Cutter N86010 Carbide Square Nose End Mill Inch TiAlN Finish Roughing and Finishing Cut 30 Degree Helix 3 Flutes 25 Overall Length 0250 Cutting Diameter 0250 Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter

Niagara Cutter N86010 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5″ Overall Length, 0.250″ Cutting Diameter, 0.250″ Shank Diameter - Square nose end mills (also called square end) create sharp, unrounded cuts. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill Weldon Shank TiAlN Finish Roughing Cutting Non-Center 30-Degree Helix 4-Flute 475 OAL 0750 Cut Diameter 0750 Shank Diameter

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill, Weldon Shank, TiAlN Finish, Roughing Cutting, Non-Center, 30-Degree Helix, 4-Flute, 4.75″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter

Niagara Cutter N75683 Cobalt Steel Square Nose End Mill, Weldon Shank, TiAlN Finish, Roughing Cutting, Non-Center, 30-Degree Helix, 4-Flute, 4.75″ OAL, 0.750″ Cut Diameter, 0.750″ Shank Diameter - Fine-pitch tooth design is suitable for machining high-temperature alloys. Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges. Number of flutes varies by diameter for optimum feed and cut rate. Titanium aluminum nitride (tialn) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than tin and ticn coatings. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.

 

Melin Tool ELMG-M-M Carbide Square Nose End Mill Metric TiCN Monolayer Finish 30 Deg Helix 3 Flutes 51mm Overall Length 5mm Cutting Diameter 5mm Shank Diameter

Melin Tool ELMG-M-M Carbide Square Nose End Mill, Metric, TiCN Monolayer Finish, 30 Deg Helix, 3 Flutes, 51mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter

Melin Tool ELMG-M-M Carbide Square Nose End Mill, Metric, TiCN Monolayer Finish, 30 Deg Helix, 3 Flutes, 51mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter - 3 flute design for lighter finishing cuts. Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. Round shanks allow use with a wide variety of toolholding systems. Small corner radius for added strength and smoother cutting action. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.