18 Best and Coolest Fatmax Tapes

 

LCH Measuring Tape Measure 26ft8m by 1inch25mm InchMetric Scale Magnetic Hook ABS Case Heavy Dual Nylon Coated Blade FatMax Ruler 4Set #ad

LCH Measuring Tape Measure, 26ft(8m) by 1inch(25mm), Inch/Metric Scale, Magnetic Hook, ABS Case Heavy Dual Nylon Coated Blade FatMax Ruler, 4Set

LCH Measuring Tape Measure, 26ft(8m) by 1inch(25mm), Inch/Metric Scale, Magnetic Hook, ABS Case Heavy Dual Nylon Coated Blade FatMax Ruler, 4Set #ad - Convenient to carry with strong belt clip, ideal for pockets and purses. Size 26ft/25mm wide dual blade, special true-zero hook allows to draw circles and arches. High impact resistant abs case, nylon coated 30% thicker blade, co-mould rubberized casing, magnetic hook for maximum durability. Accurate measurements,inches and metric measurement easy-to-read yellow blade. Tape ruler provides positive blade lock with no creeping.

 

16 Stanley FatMax Tape Rule 1-14 Wide #ad

16′ Stanley FatMax Tape Rule 1-1/4″ Wide

16′ Stanley FatMax Tape Rule 1-1/4″ Wide #ad - 8 mm)blade length 16′ (4. 9 m)width 1-1/4 in (32 mm)blade width 1-1/4″ (31. 8 mm) blade width11′ (3. The corrosion-resistant hook is attached to the blade with three rivets, and can grab on the side, top or bottom. These tape rules have a mylar coated blade with an oversized hook which grabs not only from the bottom but the sides as well. 9 m)massive new bumper for increased hook life1-1/4″ (31. 3 m) rigid standoutcrl stanley fatmax tape rules have a cushion grip case for a comfortable, easy to use non-slip grip. 3 m). Length 16 ft (4. A heavy-duty mylar “blanket wrap” coating extends blade life up to ten times longer than standard blades. The blade stays rigid even when extended up to 11′ (3.

 

FatMax Tape Rule #ad

FatMax Tape Rule

FatMax Tape Rule #ad - Wide blade for easy readability with bladearmor coating on the first 6″ that maximizes durability of hook end mylar polyester film extends life of entire blade and 11′ tape standout. High impact abs case with rubber over mold is jobsite tough, top forward blade lock, 16″ and 19. 2″ stud center markings simplify framing jobs. Cushion grip provides comfortable, slip-resistant hold and hook grabs on side, top or bottom for versatility.

 

Stanley 34-130 100-Foot FatMax Long Tape Rule #ad

Stanley 34-130 100-Foot FatMax Long Tape Rule

Stanley 34-130 100-Foot FatMax Long Tape Rule #ad - Stainless steel blade ensures long life steel roller cage protects case. Stanley’s limited lifetime warranty measures 3/8-inch-by-100-feet. Long tape rule with 3-to-1 gear drive for faster rewind. Stanley, black & decker. True-zero end hook allows accurate inside and outside measurements. Stainless steel blade ensures long life steel roller cage protects case. Durable, high-impact abs case slip-resistant rubber grip. Durable, high-impact abs case slip-resistant rubber grip. Stanley’s limited lifetime warranty measures 3/8-inch-by-100-feet. True-zero end hook allows accurate inside and outside measurements.

 

Stanley 33-725 25-Feet FatMax Tape Measure Style 25-Feet Model 33-725 Tools Hardware store #ad

Stanley 33-725 25-Feet FatMax Tape Measure Style: 25-Feet, Model: 33-725, Tools & Hardware store

Stanley 33-725 25-Feet FatMax Tape Measure Style: 25-Feet, Model: 33-725, Tools & Hardware store #ad - Mylar polyester film extends the life of the entire blade. Tape rule with first 6 feet reinforced with bladearmor coating for maximum durability. 11 foot tape standout 16-inch and 192-inch stud center markings simplify framing jobs. Heat-treated spring provides long life and smooth blade recoil. Stanley limited lifetime warranty measures 1-1/4-inch-by-25-feet.

 

Stanley STA033805 Fatmax Tape Blade Armor Dual Scale 10m Length #ad

Stanley STA033805 Fatmax Tape Blade Armor, Dual Scale, 10m Length

Stanley STA033805 Fatmax Tape Blade Armor, Dual Scale, 10m Length #ad - 3 rivet end hook, 40% stronger than a 2 rivet hook construction. Cushion grip provides sturdy, slip-resistant hold. Blade armor coating on the first 100mm reduces the risk of breaking the tape by 95%. Specially designed hook grabs on side, top or bottom for versatility. Mylar® coated blade is up to 10 times more resistant to abrasion than normal lacquered blades.

 

Stanley 33-895 FatMax Xtreme Short Tape 1-14-Inch by 30-Feet #ad

Stanley 33-895 FatMax Xtreme Short Tape, 1-1/4-Inch by 30-Feet

Stanley 33-895 FatMax Xtreme Short Tape, 1-1/4-Inch by 30-Feet #ad - Chrome case with over mold holds up to heavy use. 13 foot tape standout. High-visibility mylar polyester film extends life of entire blade and improves measurement visibility. Bladearmor coating on the first 6 feet maximizes durability of hook end. 1 1/4-inch wide blade for easy readability.

 

FatMax Tape Rule #ad

FatMax Tape Rule

FatMax Tape Rule #ad - Stanley’s limited lifetime warranty measures 1-1/4-inch-by-16-feet. Heat-treated spring provides long life and smooth blade recoil. 11-inch tape standout 16-inch and 192-inch stud center markings simplify framing jobs. Mylar polyester film extends the life of the entire blade. Tape rule with first 6 feet reinforced with bladearmor coating for maximum durability.

 

Stanley Hand Tools 33-891L FatMax Tape Rule with Blade Armor Coating #ad

Stanley Hand Tools 33-891L FatMax Tape Rule with Blade Armor Coating

Stanley Hand Tools 33-891L FatMax Tape Rule with Blade Armor Coating #ad - Mylar polyester film extends the entire blade life and a 3-rivet corrosion-resistant hook moves to allow accurate inside and outside measurements. Tape blade measures 26-feet by 1-inch with a 13-foot tape standout. Top forward blade lock design makes it easier to lock and unlock the blade heat-treated spring provides long life and smooth blade recoil. Reinforced on the first six inches with bladearmor coating for maximum durability . Cushion grip built into its ergonomic case for a non-slip grip and impact resistance.

 

Stanley 33-726 8m26-Feet by 1-14-Inch FatMax MetricFractional Tape Rule #ad

Stanley 33-726 8m/26-Feet by 1-1/4-Inch FatMax Metric/Fractional Tape Rule

Stanley 33-726 8m/26-Feet by 1-1/4-Inch FatMax Metric/Fractional Tape Rule #ad - 11-feet tape standout 16-inch and 192-inch stud center markings simplify framing jobs. Heat-treated spring provides long life and smooth blade recoil. Stanley’s limited lifetime warranty measures 1-1/4-inch-by-26-feet. Tape rule with first 6-feet reinforced with bladearmor coating for maximum durability. Mylar polyester film extends the life of the entire blade.

 

Stanley STA033811 Fatmax Tape Blade Armor 10m Length #ad

Stanley STA033811 Fatmax Tape Blade Armor, 10m Length

Stanley STA033811 Fatmax Tape Blade Armor, 10m Length #ad - The stanley fatmax blade armor 10m is a metric only (i. An awesome tape measure and precisely what you’ll have come to think of when considering the stanley fatmax range of tools. E. Metric only measurements, no imperial measurements), no nonsense, professional pocket tape for the no nonsense, professional user.

 

24 Pack Stanley 33-730 30 x 1-14 FatMax Tape Measure with Blade Armor Coating #ad

24 Pack Stanley 33-730 30′ x 1-1/4″ FatMax Tape Measure with Blade Armor Coating

24 Pack Stanley 33-730 30′ x 1-1/4″ FatMax Tape Measure with Blade Armor Coating #ad - Top-forward blade lock makes locking and unlocking a cinch. 1-1/4″ wide blade (25% wider) with 11′ of standout for easy to read graphics. 30′ blade length. Bladearmor coating on the first 3″ maximizes durability of the blade. 16″ and 192″ stud center markings simplify framing jobs.

 

Stanley STA033720 Fatmax Tape Blade Armor 5m Length #ad

Stanley STA033720 Fatmax Tape Blade Armor, 5m Length

Stanley STA033720 Fatmax Tape Blade Armor, 5m Length #ad - Size 5 metre (metric only). Mylar wrapped coating extends the blade life up to 10 times longer. The 3-rivet, corrosion resistant, tru-zero hook allows accurate inside and outside measurements. The exclusive cushion grip gives extra user control and provides impact resistance and the specially designed multi-function hook grabs on the side, top and the bottom. The extra wide blade on these tapes gives up to longer stand outs and enables easier reading.

 

CRL 30 X 1-14 Stanley FatMax Tape Rule by CR Laurence #ad

CRL 30′ X 1-1/4 Stanley FatMax Tape Rule by C.R. Laurence

CRL 30′ X 1-1/4 Stanley FatMax Tape Rule by C.R. Laurence #ad - Top-forward blade lock makes locking and unlocking a cinch. 1-1/4″ wide blade (25% wider) with 11′ of standout for easy to read graphics. Crl 30′ x 1-1/4 stanley fatmax tape rule. Bladearmor coating on the first 6″ maximizes durability of hook end. 16″ and 192″ stud center markings simplify framing jobs.

 

Stanley 33-890 FatMax Xtreme 25 foot Tape Rule -2 pack #ad

Stanley 33-890 FatMax Xtreme 25 foot Tape Rule -2 pack

Stanley 33-890 FatMax Xtreme 25 foot Tape Rule -2 pack #ad - Item package quantity-2. Stanley 33-890 fatmax xtreme 25 foot tape rule -2 pack.

 

16 Fatmax Tape Rule #ad

16′ Fatmax Tape Rule

16′ Fatmax Tape Rule #ad - Size 26ft/25mm wide dual blade, special true-zero hook allows to draw circles and arches. Tape ruler provides positive blade lock with no creeping. Convenient to carry with strong belt clip, ideal for pockets and purses. High impact resistant abs case, nylon coated 30% thicker blade, co-mould rubberized casing, magnetic hook for maximum durability. Accurate measurements,inches and metric measurement easy-to-read yellow blade.

 

24 Pack Stanley 33-725 25 x 1-14 FatMax Tape Measure with Blade Armor Coating #ad

24 Pack Stanley 33-725 25′ x 1-1/4″ FatMax Tape Measure with Blade Armor Coating

24 Pack Stanley 33-725 25′ x 1-1/4″ FatMax Tape Measure with Blade Armor Coating #ad - Top-forward blade lock makes locking and unlocking a cinch. 25′ blade length. Bladearmor coating on the first 6″ maximizes durability of the blade. 16″ and 192″ stud center markings simplify framing jobs. 1-1/4″ wide blade (25% wider) with 11′ of standout for easy to read graphics.

 

FatMax Tape Rule #ad

FatMax Tape Rule

FatMax Tape Rule #ad - 11-inch tape standout 16-inch and 192-inch stud center markings simplify framing jobs. Mylar polyester film extends the life of the entire blade. Stanley’s limited lifetime warranty measures 1-1/4-inch-by-30-feet. Tape rule with first 6 feet reinforced with bladearmor coating for maximum durability. Heat-treated spring provides long life and smooth blade recoil.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.