17 Greatest Roundover Router Bits

 

Bosch 85290MC 34-Inch Diameter 1132-Inch Cut Carbide Tipped Roundover Router Bit 14-Inch Shank With Ball Bearing

Bosch 85290MC 3/4-Inch Diameter 11/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing

Bosch 85290MC 3/4-Inch Diameter 11/32-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing - There is a compact ball-bearing pilot that guides router bit along the edge of material. The 85290m bosch router bit creates smooth radius edges on boards and panels. It requires little or no sanding before applying finish. This router bit has micrograin carbide tip for superior wear resistance and longer life. The radius cutting edge is 1/8-inch and the length of cutting edge is 3/8-inch. It has a control cut design that helps minimize kickback.

 

BOSCH 85434M 2-Inch Diameter 34-Inch Cut Carbide Tipped Roundover Router Bit 12-Inch Shank With Ball Bearing

BOSCH 85434M 2-Inch Diameter 3/4-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank With Ball Bearing

BOSCH 85434M 2-Inch Diameter 3/4-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank With Ball Bearing - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.

 

BOSCH 85594M 1-14-Inch Diameter 4364-Inch Cut Carbide Tipped Roundover Router Bit 12-Inch Shank

BOSCH 85594M 1-1/4-Inch Diameter 43/64-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank

BOSCH 85594M 1-1/4-Inch Diameter 43/64-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank - 85594m features -bit. -1/2” bearing diameter. -1/2” shank diameter. -Micrograin bit used for smooth, uniformly rounded edges. -5/8” cutting edge length. -3/8” overall length. -Lower depth setting produces a rounded corner with a decorative bead. -2-9/16” overall length. -1-1/4” overall diameter.

 

Magnate 3911 Plunge Roundover Router Bit - 316 Radius 14 Small Diameter 14 Shank Diameter

Magnate 3911 Plunge Roundover Router Bit – 3/16″ Radius; 1/4″ Small Diameter; 1/4″ Shank Diameter

Magnate 3911 Plunge Roundover Router Bit – 3/16″ Radius; 1/4″ Small Diameter; 1/4″ Shank Diameter - Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Combination cutters for plunging through boards and for rounding corners as well as edge forming. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips. It is precision ground, hardened, and tempered in order to stand up to a variety of materials.

 

Magnate 1296 Shear Under Roundover Router Bits - 34 Radius 1 Cutting Length 12 Shank Diameter

Magnate 1296 Shear Under Roundover Router Bits – 3/4″ Radius; 1″ Cutting Length; 1/2″ Shank Diameter

Magnate 1296 Shear Under Roundover Router Bits – 3/4″ Radius; 1″ Cutting Length; 1/2″ Shank Diameter - Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. You may try the following suggestion. In case a bit doesn’t come with a speed chart. Without turning over the heavy material, these bits create a round edge under the solid surface countertop. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 12 Shank 34 Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 3/4″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 3/4″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit - Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table.

 

PORTER-CABLE 43408PC 12-Inch Roundover Router Bit

PORTER-CABLE 43408PC 1/2-Inch Roundover Router Bit

PORTER-CABLE 43408PC 1/2-Inch Roundover Router Bit - -Decorative design which can be used to simulate victorian moldings. -For decorative period edging. 593-43408pc features -ball bearing pilot. -For decorative edging and furniture. -Quantity 1 per pack. Color/finish -for cutting decorative edging inverted radii, where smoother finish is desired. -Produce a multitude of different profiles by varying height and fence settings, and using multiple passes. -Lower depth setting results in chamfer with fillet. -Classic combination of two styles commonly used in furniture and cabinetry. -Lower depth setting results in addition of fillet. -Lower depth setting results in rounded corner with decorative fillet. -Price is for 1 each. -Graceful decorative design may be routed with or without fillet. -For smooth, uniformly rounded edges. -Cutting edge material carbide-tipped. -creates triple bead with fillets in one pass. -For use in table mounted routers only. -Creates sloping edge as used on table tops and plaques. -Use to create professional stile and rail doors. -3/8” piloted bits for rabbeting or step cutting edges.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 14 Shank 516 Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 5/16″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 5/16″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit - Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 12 Shank 12 Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 1/2″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 1/2″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit - Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table. Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish.

 

Ryobi A25RS41 4-Piece Roundover Router Bit Set

Ryobi A25RS41 4-Piece Roundover Router Bit Set

Ryobi A25RS41 4-Piece Roundover Router Bit Set - To learn more about ryobi tools go to ryobitools. , 3/8 in. Bit. Sized round over router bits with a bonus 1/8 in. Ryobi introduces the ryobi 4-piece round over router bit set. The bit set contains 1/4 in. Com and check out ryobi nation. See below for more information on this tool. , 1/2 in.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 12 Shank 38 Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 3/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit

EnPoint® Woodworking Carbide-Tipped Beadboard Router Bit 1/2″ Shank 3/8″ Cut Dia Industrial Quality Point Cutting Roundover Router Bit Trimming Lettering Fluting Plunge Ovolo Router Bit - Carbide cutting edges produce a very smooth, clean finish that rarely requires sanding to finish. Rout decorative grooves on solid wood or mdf panels and surfaces with a handheld or cnc router form edges with a hand router equipped with an edge guide, or on a router table. Teflon coating for build-up heat resistant high grade carbide keeps its edge with no edge chipping. Outstanding tool longevity, a tendency to stay sharper, mirror like carbide finish, excellent carbide brazing. Cut a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc.

 

Magnate 7514 Point Cutting Roundover Router Bits - 716 Radius 12 Shank Diameter

Magnate 7514 Point Cutting Roundover Router Bits – 7/16″ Radius; 1/2″ Shank Diameter

Magnate 7514 Point Cutting Roundover Router Bits – 7/16″ Radius; 1/2″ Shank Diameter - This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. Excessive overall length may cause tool damage. You may try the following suggestion. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Bosch 85289M 116-Inch Diameter 1964-Inch Cut Carbide Tipped Roundover Router Bit 14-Inch Shank With Ball Bearing

Bosch 85289M 1/16-Inch Diameter 19/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing

Bosch 85289M 1/16-Inch Diameter 19/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Bosch 85595M 1-12-Inch Diameter 5364-Inch Cut Carbide Tipped Roundover Router Bit 12-Inch Shank

Bosch 85595M 1-1/2-Inch Diameter 53/64-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank

Bosch 85595M 1-1/2-Inch Diameter 53/64-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank - Recommended for use with a routing table. The product is manufactured in israel. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. The item is bosch 85595m 1-1/2-inch diameter 53/64-inch cut carbide tipped roundover router bit 1/2-inch shank. Used for power tool accessories, drill bits & accessories.

 

Bosch 85293MC 78-Inch Diameter 3164-Inch Cut Carbide Tipped Roundover Router Bit 14-Inch Shank With Ball Bearing

Bosch 85293MC 7/8-Inch Diameter 31/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing

Bosch 85293MC 7/8-Inch Diameter 31/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing - Shank length 1-1/4 inch. Carbide tipped roundover bits are micrograin bits used for smooth, uniformly rounded edges. Top of the line smoothness of cut. Overall diameter 7/8 inch. Cutting edge length 31/64 inch. Bearing diameter 1/2 inch. Bosch router bitsit is a 3/16 inch carbide tipped roundover bit. Useful when good chip clearance is important in material such as gummy wood. Overall length 2-3/32 inch. All bits must be inserted in the full length of the collet. A lower depth setting produces a rounded corner with a decorative bead. Specifications radius 3/16 inch. Be sure to use only router bits and accessories specifically designed for your router. Shank diameter 1/4 inch. Features perfectly balanced cutting.

 

77mm Long End Bearing Corner Roundover Router Bit Tool 12 x 2

77mm Long End Bearing Corner Roundover Router Bit Tool 1/2″ x 2″

77mm Long End Bearing Corner Roundover Router Bit Tool 1/2″ x 2″ - Cutting depth 32mm / 13″cutting width 254mm / 1″overall diameter 638mm / 25″. Overall length 77mm / 3″color silver tone, bluematerial steel, carbide. Weight 167gpackage content 1 x rounding bit1 x plastic case. Shank diameter 127mm / 1/2″cutting diameter 508mm /2″cutting radius 254mm /1″. Product name rounding over bitstandard 1/2″ x 2″bearing diameter 127mm.

 

Bosch 85294MC 1-Inch Diameter 3564-Inch Cut Carbide Tipped Roundover Router Bit 14-Inch Shank With Ball Bearing

Bosch 85294MC 1-Inch Diameter 35/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing

Bosch 85294MC 1-Inch Diameter 35/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing - Recommended for use with a routing table. All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router.