17 Coolest Downcuts in 2019

 

MLCS 7487 38-Inch Diameter Solid Carbide Downcut Spiral Router Bit #ad

MLCS 7487 3/8-Inch Diameter Solid Carbide Downcut Spiral Router Bit

MLCS 7487 3/8-Inch Diameter Solid Carbide Downcut Spiral Router Bit #ad - Perfect for shallow mortises, grooves, dadoes, rabbets and plunge cuts. Down cut 3/8-inch diameter. 1/2-inch shank. Solid micro grain carbide cuts smooth and stays sharp. Mlcs quality guaranteed.

 

CMT 19050611 Solid Carbide UpDowncut Spiral Bit 12-Inch #ad

CMT 190.506.11 Solid Carbide Up/Downcut Spiral Bit, 1/2-Inch

CMT 190.506.11 Solid Carbide Up/Downcut Spiral Bit, 1/2-Inch #ad - For use on machining centers, point to point machines, cnc routers. Also for use on hand-held routers equipped with chucks or adaptors. 2+2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. 1-1/8-inch cutting length, 5/8-inch minor cutting length, 3-inch overall length. Premium quality solid carbide excellent finish on both the workpiece upper/lower side.

 

LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. One flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

CMT 19250111 Solid Carbide Downcut Spiral Bit 516-Inch Diameter by 3-Inch Length 12-Inch Shank #ad

CMT 192.501.11 Solid Carbide Downcut Spiral Bit, 5/16-Inch Diameter by 3-Inch Length, 1/2-Inch Shank

CMT 192.501.11 Solid Carbide Downcut Spiral Bit, 5/16-Inch Diameter by 3-Inch Length, 1/2-Inch Shank #ad - For cutting, copying, sizing and routing wood products, plastic & laminates. Also for use on hand-held routers equipped with chucks or adaptors. For use on machining centers, point to point machines, cnc routers. 1-inch cutting length, 2 cutting edges, right-hand rotation. Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection.

 

Eagle America 106-0252 Solid Carbide Spiral Downcut Router Bit 18-Inch Diameter 14-Inch Shank #ad

Eagle America 106-0252 Solid Carbide Spiral Downcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank

Eagle America 106-0252 Solid Carbide Spiral Downcut Router Bit 1/8-Inch Diameter 1/4-Inch Shank #ad - Usa down-cut bits cut slower and push chips away from the router to eliminate top surface splintering. Ideal for fine finish work such as veneers, laminates, inlays and repairs because they prevent upper edge tear outs. Use down-cuts for trimming and sizing. Our production quality spiral bits combine effective chip removal with a continuous shearing action cut not obtained from a standard straight bit. You’ll get smoother cutting action with better results. All bits two flute, solid carbide. Use for pattern cutting or when going completely through the board as it allows clear vision of the cutting line. 1/8-inchdiameter, 1/2-inch cut length, 2-inch overall length, 1/4-inch shank.

 

LMT Onsrud 62-763 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter #ad

LMT Onsrud 62-763 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 62-763 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter #ad - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. One flute, 21 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout Inch Uncoated Bright Finish 30 Degree Helix 2 Flutes 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Double flute, 30 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

CMT 19250711B Solid Carbide Downcut Spiral Flush Trim Bit 12-Inch #ad

CMT 192.507.11B Solid Carbide Downcut Spiral Flush Trim Bit, 1/2-Inch

CMT 192.507.11B Solid Carbide Downcut Spiral Flush Trim Bit, 1/2-Inch #ad - Premium quality solid carbide excellent finish on the upper side of the workpiece. For cutting, copying, sizing and routing wood products, plastic & laminates. Bit runs cooler and the edges will stay sharper, last longer and increases your shop productivity. Sheer wood and wood products cleanly more efficient chip ejection than standard flush trim bits. 2-inch cutting length, 4-inch overall length.

 

CMT 19051511 Solid Carbide UpDowncut Spiral Mortising Bit 12-Inch #ad

CMT 190.515.11 Solid Carbide Up/Downcut Spiral Mortising Bit, 1/2-Inch

CMT 190.515.11 Solid Carbide Up/Downcut Spiral Mortising Bit, 1/2-Inch #ad - Also for use on hand-held routers equipped with chucks or adaptors. 2+2 cutting edges for cutting, copying, sizing and routing wood products, plastic & laminates. For use on machining centers, point to point machines, cnc routers. 7/8-inch cutting length,13/64-inch minor cutting length, 3-inch overall length. Premium quality solid carbide excellent finish on both the workpiece upper/lower side.

 

CMT 19650611 Solid Carbide Downcut Spiral Bit Chipbreaker 12-Inch Diameter #ad

CMT 196.506.11 Solid Carbide Downcut Spiral Bit & Chipbreaker, 1/2-Inch Diameter

CMT 196.506.11 Solid Carbide Downcut Spiral Bit & Chipbreaker, 1/2-Inch Diameter #ad - Also for use on hand-held routers equipped with chucks or adaptors. For cutting, copying, sizing and routing wood products, plastic & laminates. 1-1/2-inch cutting length, 3 cutting edges, max tooth depth 03mm. Premium quality solid carbide, excellent finish on the workpiece upper side downward chip ejection. For use on machining centers, point to point machines, cnc routers.

 

CMT 36305022 XTreme Solid Carbide Twist Drill 120° downcut round sharpening 5mm 1364-Inch Left-Hand Rotation #ad

CMT 363.050.22 XTreme Solid Carbide Twist Drill 120° downcut round sharpening, 5mm (13/64-Inch), Left-Hand Rotation

CMT 363.050.22 XTreme Solid Carbide Twist Drill 120° downcut round sharpening, 5mm (13/64-Inch), Left-Hand Rotation #ad - Right-hand rotation. Shank correspons to cutting diameter. Made of premium quality solid tungsten carbide and featuring 2 precision ground cutting edges and 2 spiral flutes. Xtreme twist drill featuring downcut round sharpening to be used in adapter bushings.

 

LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool Inch Uncoated Bright Finish 10 Degree Helix 3 Flutes 35000 Overall Length 05000 Cutting Diameter 05000 Shank Diameter #ad

LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter

LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000″ Overall Length, 0.5000″ Cutting Diameter, 0.5000″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Three flute, 10 degree angle. Round shanks allow use with a wide variety of toolholding systems.

 

MLCS Woodworking Solid Carbide Spiral Downcut 3 Pc Set #ad

MLCS Woodworking Solid Carbide Spiral Downcut 3 Pc. Set

MLCS Woodworking Solid Carbide Spiral Downcut 3 Pc. Set #ad - They also hold material in place while using handheld routers. All three bits are solid micrograin carbide for fast, smooth cuts and an edge that stays sharp longer. Includes the following diameter downcut bits 1/4″ d (1″ cutting length, 1/4″ shank), 1/2″ d (1-1/2″ cutting length, 1/2″ shank), and 3/8″ d (1-1/4″ cutting length, 1/2″ shank). Spiral bits produce a very clean and accurate cut with minimal chatter. Downcut spiral cut downward, away from the router base, creating a clean and smooth edge for grooves, dadoes, rabbets, shallow mortises and plunge cuts.

 

Infinity Tools 85-114 14 Shank Downcut Spiral Router Bit 14 Cutter Diam 1 Cutter Height #ad

Infinity Tools 85-114, 1/4″ Shank Downcut Spiral Router Bit, 1/4″ Cutter Diam., 1″ Cutter Height

Infinity Tools 85-114, 1/4″ Shank Downcut Spiral Router Bit, 1/4″ Cutter Diam., 1″ Cutter Height #ad - Our solid carbide spiral bits provide remarkable performance and durability. Manufactured using state-of-the-art computer controlled machinery these micro-grain carbide cutters feature our optimal helix design and last up to 300% longer than regular router bits. These are you best choice for cutting grooves or dadoes in tough material like particleboard, melamine and other abrasive materials.

 

StewMac Carbide Downcut Inlay Router Bit 116 159mm diameter #ad

StewMac Carbide Downcut Inlay Router Bit, 1/16″ (1.59mm) diameter

StewMac Carbide Downcut Inlay Router Bit, 1/16″ (1.59mm) diameter #ad - For fine detail inlay routing. Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. Comes in sturdy protective case, with bit cutting diamater size clearly marked. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Solid carbide lasts far longer than steel.

 

StewMac Carbide Downcut Inlay Router Bit 364 119mm diameter #ad

StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter

StewMac Carbide Downcut Inlay Router Bit, 3/64″ (1.19mm) diameter #ad - Reverse spiral flutes cut downward for cleaner, “no fuzz” edges in routed cavities. For fine detail inlay routing. Solid carbide lasts far longer than steel. Length 1-1/2″ (3810mm), shank diameter 1/8″ (318mm). Comes in sturdy protective case, with bit cutting diamater size clearly marked.

 

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter #ad

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter #ad - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.