16 Coolest Metric M10s in 2020

 

304 Stainless Steel Metric M10 Flange Nuts 10mm Hex Nut-25 Pack #ad

304 Stainless Steel Metric M10 Flange Nuts 10mm Hex Nut-25 Pack

304 Stainless Steel Metric M10 Flange Nuts 10mm Hex Nut-25 Pack #ad - Smooth surface without burrs. Practicalit can reduce the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface. Materialdurable 304 stainless steelcompared with normal stainless steel,it’s safe, non-toxic and corrosion resistantit is of high hardness and not easy to deform. Strict quality testsalt spray test, spectral detection and chemical detection insure high quality products. Sizem10 package25pcs(more size information please refer to the picture).

 

M10 35mm Thumb Screws Heavy Duty Steel Shoulderless Flat Head Metric M10 Thumb Screw with 15mm Thread Pitch 5 pcs #ad

M10 35mm Thumb Screws Heavy Duty Steel Shoulderless Flat Head Metric M10 Thumb Screw with 1.5mm Thread Pitch (5 pcs)

M10 35mm Thumb Screws Heavy Duty Steel Shoulderless Flat Head Metric M10 Thumb Screw with 1.5mm Thread Pitch (5 pcs) #ad - Quantity, this product consists of five (5), m10 x 15 x 35mm metric thumb screws. Heavy duty, made of steel and is intended to be finger tight, but can withstand good turning pressure for many of your projects recommended for indoors, but can be used outdoors. Size, m10 thumb screw, threaded portion is 35mm in length with a 15mm thread pitch this is a large size thumb screw. Easy turning, flat head or pan head on the thumb screw has no shoulder so it is easy to turn into place for solid and tight fit.

 

Whittet-Higgins BM-00 Bearhug Threaded Shaft Bearing Locknut Metric M10 X 75 Right-Hand Thread Self-Locking Replaces Fuji FU00SC FU00SS Generic GUK0 GUK10 SKF KM 0 Standard KM 0 #ad

Whittet-Higgins BM-00 Bearhug Threaded Shaft & Bearing Locknut, Metric M10 X .75 Right-Hand Thread, Self-Locking, Replaces Fuji FU00SC, FU00SS, Generic GUK0, GUK10, SKF KM 0, Standard KM 0,

Whittet-Higgins BM-00 Bearhug Threaded Shaft & Bearing Locknut, Metric M10 X .75 Right-Hand Thread, Self-Locking, Replaces Fuji FU00SC, FU00SS, Generic GUK0, GUK10, SKF KM 0, Standard KM 0, #ad - Made in usa. Balanced design for high speed applications. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment.

 

The Hillman Group 3911 Hex Cap Screw Metric M10-125 X 110mm 5-Pack #ad

The Hillman Group 3911 Hex Cap Screw Metric M10-1.25 X 110mm (5-Pack)

The Hillman Group 3911 Hex Cap Screw Metric M10-1.25 X 110mm (5-Pack) #ad - Zinc finish for improved corrosion resistance. Ideal for use in construction, agricultural, and automotive applications. Included variants run 65mm thru 120mm in length. To be used in fully threaded holes. Included variants range from m8-100 to m12-125 in fine thread size.

 

uxcell 3 Pcs Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 220mm Long #ad

uxcell 3 Pcs Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 220mm Long

uxcell 3 Pcs Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 220mm Long #ad - Country of manufacture china material metal. Net weight 110g package content 3 pcs x lamp nipple. Product name lamp nipple. Thread pitch 1mm total size 220mm x 10mm / 866″ x 039″ (ld). Main color sliver tone thread size m10 / 039″.

 

Prime-Line 9089592 Flange Bolts Class 88 Metric M10-150 X 25MM Zinc Plated Steel 25-Pack #ad

Prime-Line 9089592 Flange Bolts, Class 8.8 Metric, M10-1.50 X 25MM, Zinc Plated Steel, 25-Pack

Prime-Line 9089592 Flange Bolts, Class 8.8 Metric, M10-1.50 X 25MM, Zinc Plated Steel, 25-Pack #ad - Designed for use with a nut or a threaded hole of the same diameter and thread size. Size m10-150 x 25mm. Hex bolt with a circular flange under the head. Nuts not included. Flange eliminates need for separate washer.

 

uxcell Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 290mm Long 2pcs #ad

uxcell Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 290mm Long 2pcs

uxcell Metric M10 1mm Pitch Thread Zinc Plated Pipe Nipple Lamp Parts 290mm Long 2pcs #ad - Net weight 105g package content 2pcs x lamp nipple. Product name lamp nipple. Country of manufacture china material metal. Main color sliver tone thread size m10 / 039″. Thread pitch 1mm total size 290mm x 10mm / 1142″ x 039″ (ld).

 

Autobahn88 Alloy Seal Ring  Flat Washer Metric M10 ID 10mm  04 fits for Banjo Bolt Pack of 10 #ad

Autobahn88 Alloy Seal Ring / Flat Washer, Metric M10 (ID 10mm / 0.4″) fits for Banjo Bolt (Pack of 10)

Autobahn88 Alloy Seal Ring / Flat Washer, Metric M10 (ID 10mm / 0.4″) fits for Banjo Bolt (Pack of 10) #ad - Autobahn88 is trademark of autobahn88 company. 4″) for banjo bolt (pack of 10) all product names, logos, and brands are property of their respective owners. Autobahn88 alloy seal ring / flat washer, metric m10 (id 10mm / 0.

 

Prime-Line 9109808 Hex Head Cap Screws Class 88 Metric M10-150 X 75MM Zinc Plated Steel 5-Pack #ad

Prime-Line 9109808 Hex Head Cap Screws, Class 8.8 Metric, M10-1.50 X 75MM, Zinc Plated Steel, 5-Pack

Prime-Line 9109808 Hex Head Cap Screws, Class 8.8 Metric, M10-1.50 X 75MM, Zinc Plated Steel, 5-Pack #ad - Size m10-150 x 75mm. Hex bolt with a chamfered end and washer face under the head. Nuts not included. Often called finished hex bolt. Designed for use with a nut or a threaded hole of the same diameter and thread size.

 

Steel Hex Nut Zinc Plated Finish Class 8 DIN 934 Metric M10-1 Thread Size 17 mm Width Across Flats 8 mm Thick Pack of 50 #ad

Steel Hex Nut, Zinc Plated Finish, Class 8, DIN 934, Metric, M10-1 Thread Size, 17 mm Width Across Flats, 8 mm Thick (Pack of 50)

Steel Hex Nut, Zinc Plated Finish, Class 8, DIN 934, Metric, M10-1 Thread Size, 17 mm Width Across Flats, 8 mm Thick (Pack of 50) #ad - Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut. Zinc plating resists corrosion and has a reflective appearance. Meets din 934 specifications. Class 8 steel is often used in applications where strength is the primary consideration.

 

Prime-Line 9078904 T-Nuts 4-Prong Metric M10-150 Zinc Plated Steel 10-Pack #ad

Prime-Line 9078904 T-Nuts, 4-Prong Metric, M10-1.50, Zinc Plated Steel, 10-Pack

Prime-Line 9078904 T-Nuts, 4-Prong Metric, M10-1.50, Zinc Plated Steel, 10-Pack #ad - Nut flange ends up being flush with the material. Size m10-150. Teeth on the head prevent the nut from turning while the fastener is being screwed in. Hole is predrilled into board slightly larger diameter than the t-nut. Use to create a threaded hole in wood, composite or particle board.

 

YXQ M10 x 15mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug 6Pcs #ad

YXQ M10 x 1.5mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug (6Pcs)

YXQ M10 x 1.5mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug (6Pcs) #ad - Package include 6pcs taper and plug metric tap. Flute diameter 10mm / 03″flute teeth pitch 15mm / 006″. Total length 3 inchesdiameter 04 inches. 3 straight threaded flutethread directionright hand. Item namemetric tap,plug typematerial hss(high speed steel).

 

Cle-Line C63236 Taper Plug and Bottoming Hand Tap Set M10-15 Metric #ad

Cle-Line C63236 Taper, Plug and Bottoming Hand Tap Set, M10-1.5 Metric

Cle-Line C63236 Taper, Plug and Bottoming Hand Tap Set, M10-1.5 Metric #ad - Set includes taper, plug and bottoming chamfer of each size. 5 metric number of flutes 4. Hss substrate, bright finish. Cle-line taper, plug and bottoming hand tap set m10-1.

 

Brass Flat Washer Plain Finish DIN 125 Metric M10 Screw Size 105 mm ID 20 mm OD 2 mm Thick Pack of 25 #ad

Brass Flat Washer, Plain Finish, DIN 125, Metric, M10 Screw Size, 10.5 mm ID, 20 mm OD, 2 mm Thick (Pack of 25)

Brass Flat Washer, Plain Finish, DIN 125, Metric, M10 Screw Size, 10.5 mm ID, 20 mm OD, 2 mm Thick (Pack of 25) #ad - The most common style is a flat washer. The brass flat washer has a plain finish and meets deutsches institut für normung din 125 specifications. The flat washer provides a bearing surface for fastener load distribution or is used as a spacer between components. A cup washer, for example, helps protect fasteners from electrical currents, while a lock washer offers additional security in an assembled workpiece. The material is nonmagnetic. More specialized washers provide additional benefits. Several different washer styles fit a variety of application and installation requirements. Brass provides corrosion resistance and offers thermal and electrical conductivity. Washers distribute the load of a fastener across a surface and can also be used as spacers, springs, shims, or locking devices.

 

Steel Hex Nut Plain Finish Class 8 DIN 934 Metric M10-15 Thread Size 17 mm Width Across Flats 8 mm Thick Pack of 100 #ad

Steel Hex Nut, Plain Finish, Class 8, DIN 934, Metric, M10-1.5 Thread Size, 17 mm Width Across Flats, 8 mm Thick (Pack of 100)

Steel Hex Nut, Plain Finish, Class 8, DIN 934, Metric, M10-1.5 Thread Size, 17 mm Width Across Flats, 8 mm Thick (Pack of 100) #ad - Some styles, such as hex nuts, acorn nuts, flange nuts, and coupling nuts, must be tightened with a tool. Others, such as eye nuts, thumb nuts, and wing nuts, can be tightened by hand. Nuts are internally threaded fasteners that are used with bolts and threaded rods and studs to connect components. Some nuts have a self-locking mechanism, such as a nylon patch or distorted threads, that makes them suitable for applications with a high amount of vibration. Several different nut styles fit a variety of application and installation requirements. Class 8 steel is often used in applications where stength is the primary consideration. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. The class 8 steel hex nut has a plain finish and meets deutsches institut für normung din 934 specifications.

 

uxcell Metric M10 x 20mm 304 Stainless Steel Wing Butterfly Thumb Screw 2pcs #ad

uxcell Metric M10 x 20mm 304 Stainless Steel Wing Butterfly Thumb Screw 2pcs

uxcell Metric M10 x 20mm 304 Stainless Steel Wing Butterfly Thumb Screw 2pcs #ad - Thread size m10 x 20mm/04″ x 08″(dl). Weight 63g package content 2pcs x wing butterfly screw. Overall size 40 x 35 x 17mm/16″ x 14″ x 07″(lwt) main color silver tone. Product name wing butterfly screw material 304 stainless steel. Thread pitch 15mm.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.