16 Coolest Drill Points

 

Zinc Plated Steel Self-Drilling Screw Undercut 82 degrees Flat Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 inches Length Pack of 100

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Undercut 82 degrees Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4 inches Length (Pack of 100) - Create their own threads when driven into material. Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Phillips drive is designed to cam out under too much torque. Flat head style allows fastener to sit flush to the surface.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 3 Drill Point 10-16 Thread Size 1 Length Pack of 25

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Plain surface has no finish or coating. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

Zinc Plated Steel Self-Drilling Screw Pan Head Phillips Drive 2 Drill Point 4-24 Thread Size 1 inches Length Pack of 100

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1 inches Length (Pack of 100)

Zinc Plated Steel Self-Drilling Screw, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1 inches Length (Pack of 100) - Zinc plated steel fasteners are suitable where strength and corrosion resistance are primary considerations. Phillips drive is designed to cam out under too much torque. Pan head allows for higher tightening torques. Create their own threads when driven into material.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 12 Length Pack of 50

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2″ Length (Pack of 50)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1/2″ Length (Pack of 50) - Modified truss head is extra wide with a low-profile dome and integral round washer. Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments.

 

Mitutoyo 950-275 Drill Point Gage 6 59 Degree

Mitutoyo 950-275 Drill Point Gage, 6″, 59 Degree

Mitutoyo 950-275 Drill Point Gage, 6″, 59 Degree - Rule and slide made of steel with satin chrome finish. For measuring properly grounded 59 degree drill tips. Slide graduated oem 32nds.

 

410 Stainless Steel Self-Drilling Screw Plain Finish Wafer Head Phillips Drive 3 Drill Point 10-24 Thread Size 1-12 Length Pack of 25

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25)

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2″ Length (Pack of 25) - Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-14 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/4″ Length (Pack of 50) - Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.

 

Stainless 6 x 12 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 410 Stainless Steel Self Driller 100 pieces 6 x 12 Inch

Stainless #6 x 1/2 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces (#6 x 1/2 Inch)

Stainless #6 x 1/2 Inch Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces (#6 x 1/2 Inch) - Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. The length of the drill point determines the material thickness which the screw can reliably penetrate. These stainless teks are great to use in environments that are damp.

 

Stainless 12 x 34 Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 12 to 2-12 lengths in Listing 100 pieces 12 X 34 INCH

Stainless #12 x 3/4″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2″ to 2-1/2″ lengths in Listing), 100 pieces (#12 X 3/4 INCH)

Stainless #12 x 3/4″ Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2″ to 2-1/2″ lengths in Listing), 100 pieces (#12 X 3/4 INCH) - The length of the drill point determines the material thickness which the screw can reliably penetrate. . These stainless teks are great to use in environments that are damp. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined. Self-drilling screws, also known as tek screws, eliminate the need for a pre-drilled hole.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 1-12 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1-1/2″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance.

 

Hilitchi 295 Pieces 8  10  14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point 12 to 2 Size Inside Plastic Box

Hilitchi 295 Pieces #8 / #10 / #14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2” to 2” Size Inside Plastic Box)

Hilitchi 295 Pieces #8 / #10 / #14 Stainless Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point (1/2” to 2” Size Inside Plastic Box) - High quality 304 stainless steel self-drilling screws kit screw type hex washer head self drilling screws material high quality 304 stainless steel, stainless steel with superior rust resistant ensure long lasting results package quantity 295 pieces set include #8 1/2”——————30 pieces #8 5/8”——————30 pieces #8 3/4”——————30 pieces #8 1/”——————–30 pieces #8 1-1/4”—————-20 pieces #10 1/2”—————–30 pieces #10 5/8”—————–30 pieces #10 3/4”—————–30 pieces #10 1/”——————-30 pieces #10 1-1/4”—————20 pieces #14 1-1/4”—————-5 pieces #14 1-1/2”—————-5 pieces #14 2”———————-5 pieces comes in a handy plastic organizer case with size compartments for easy storage.

 

Steel Self-Drilling Screw Zinc Plated Finish Pan Head Star Drive 2 Drill Point 6-20 Thread Size 34 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Star Drive, #2 Drill Point, #6-20 Thread Size, 3/4″ Length (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Pan head has a flat top and short vertical sides with a rounded top edge. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Self-Drilling Screw Zinc Plated Finish Modified Truss Head Phillips Drive 2 Drill Point 8-18 Thread Size 34 Length Pack of 100

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 3/4″ Length (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer.

 

Steel Self-Drilling Screw With Wings Zinc Plated Finish 82 Degree Flat Head Phillips Drive 4 Drill Point 12-24 Thread Size 2 Length Pack of 50

Steel Self-Drilling Screw With Wings, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #4 Drill Point, #12-24 Thread Size, 2″ Length (Pack of 50)

Steel Self-Drilling Screw With Wings, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #4 Drill Point, #12-24 Thread Size, 2″ Length (Pack of 50) - Wings above the drill point enable secure fastening of thick wood to metal. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Zinc plating resists corrosion and has a reflective appearance. Steel is often used in applications where strength is the primary consideration.

 

Steel Self-Drilling Screw Zinc Plated Finish Wafer Head Star Drive 3 Drill Point 10-16 Thread Size 1-12 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Zinc plating resists corrosion and has a reflective appearance. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive.

 

Steel Self-Drilling Screw Zinc Plated Finish Flat Trim Head Square Drive 2 Drill Point 6-20 Thread Size 2-14 Length Pack of 50

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Trim Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 2-1/4″ Length (Pack of 50) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a reflective appearance. Square drive resists slippage better than a phillips or slotted drive. Trim head has a flat top and is smaller than other screw heads for less visibility when installed.