16 Best Swiss Pattern Files

 

Grobet Swiss Pattern File Round Parallel 4x116 Inch Cut 2

Grobet Swiss Pattern File Round Parallel 4×1/16 Inch Cut 2

Grobet Swiss Pattern File Round Parallel 4×1/16 Inch Cut 2 - “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Cut over the entire surface (does not taper to point) double cut. Used by professionals.

 

Grobet Swiss Pattern File Vulcrylic 8 Inch

Grobet Swiss Pattern File Vulcrylic 8 Inch

Grobet Swiss Pattern File Vulcrylic 8 Inch - Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials one end is coarser than the other double cut on both sides 17/32″ wide. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.

 

Grobet Swiss Pattern File Pillar Regular 4 Inch Cut 4

Grobet Swiss Pattern File Pillar Regular 4 Inch Cut 4

Grobet Swiss Pattern File Pillar Regular 4 Inch Cut 4 - “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals. These files are parallel in width and tapered in thickness to make possible perfectly flat filing double cut top and bottom, both edges are safe 3/8″ wide x 1/8″ thick.

 

Grobet Swiss Pattern File Hand 6 Inch Cut 6

Grobet Swiss Pattern File Hand 6 Inch Cut 6

Grobet Swiss Pattern File Hand 6 Inch Cut 6 - Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 45/64″ wide x 5/32″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.

 

Grobet Swiss Pattern File Pillar Narrow 8 Inch Cut 00

Grobet Swiss Pattern File Pillar Narrow 8 Inch Cut 00

Grobet Swiss Pattern File Pillar Narrow 8 Inch Cut 00 - These files are parallel in width and tapered in thickness to make possible perfectly flat filing double cut top and bottom, both edges are safe 25/64″ wide x 11/64″ thick. Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.

 

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 0 30 lines per inch

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 0 30 lines per inch

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 0 30 lines per inch - Used by professionals. Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 30 lines per inch 45/64″ wide x 5/32″ thick. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.

 

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 00 20 lines per inch

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 00 20 lines per inch

Grobet Swiss Pattern File Checkerings Hand 6 Inch Cut 00 20 lines per inch - Parallel in width and gently tapered in thickness overcut is parallel to file edges and upcut is 90 degree to overcut useful for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip double cut top and bottom both edges are safe 20 lines per inch 45/64″ wide x 5/32″ thick. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.

 

Grobet Swiss Pattern File Escapement 5-12 Round Cut 4

Grobet Swiss Pattern File Escapement 5-1/2″ Round Cut 4

Grobet Swiss Pattern File Escapement 5-1/2″ Round Cut 4 - Used by professionals. Also known as square handled needle files, these precision files are available in most of the needle file shapes length of cut is 1-9/16″ to 2-9/16″ (397 to 651 mm) depending upon shape. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.

 

Grobet Swiss Pattern File Inox Hand 8 Inch Cut 2

Grobet Swiss Pattern File Inox Hand 8 Inch Cut 2

Grobet Swiss Pattern File Inox Hand 8 Inch Cut 2 - For platinum, stainless steel, exotic plastics, and other hard to file materials the hardest surface known -rockwell hardness 72hrc better performance on hard-to-file surfaces little or no clogging a simple knock is enough to remove the chips highly resistant to corrosion longer life than standard files. Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.

 

Grobet Swiss Pattern File Hand 8 Inch Cut 0

Grobet Swiss Pattern File Hand 8 Inch Cut 0

Grobet Swiss Pattern File Hand 8 Inch Cut 0 - Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 7/8″ wide x 1/5″ thick. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Used by professionals.

 

Ergo Grip Swiss Pattern Files Assorted Set of 5 Cut 1

Ergo Grip Swiss Pattern Files Assorted Set of 5 Cut 1

Ergo Grip Swiss Pattern Files Assorted Set of 5 Cut 1 - The distinctive design includes a built-in handle, so there’s no separate handle to buy and they’re shaped for easy handling and balanced for efficient cutting. Ergo grip files offer the craftsman something different precision files designed for those “in-between” jobs, too big for needle files and requiring finer control than a larger, heavier file can deliver. Length of cut is 4″ (10 cm) and the overall length is 8-1/2″ (22 cm). These strong, durable files are ideal for a variety of uses. Set consists of all five shapes, hand, half-round, round, square and three square.

 

Grobet Swiss Pattern Needle File 6-14 Inch Three Square Cut 2

Grobet Swiss Pattern Needle File 6-1/4 Inch Three Square Cut 2

Grobet Swiss Pattern Needle File 6-1/4 Inch Three Square Cut 2 - Used by professionals. “swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Precision files, for exacting work, especially under magnification made of the highest quality steel, machined and finished for precision shape, accuracy and balance.

 

Grobet Swiss Pattern File Hand 6 Inch Cut 1

Grobet Swiss Pattern File Hand 6 Inch Cut 1

Grobet Swiss Pattern File Hand 6 Inch Cut 1 - Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Parallel in width and tapered in thickness double cut top and bottom one edge is single cut one edge is safe 45/64″ wide x 5/32″ thick.

 

Grobet Swiss Pattern File Halfround 6 Inch Cut 2

Grobet Swiss Pattern File Halfround 6 Inch Cut 2

Grobet Swiss Pattern File Halfround 6 Inch Cut 2 - “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made. Tapered in width and thickness, coming to a point double cut on both sides 5/8″ wide x 11/64″ thick. Used by professionals.

 

Ergo Grip Swiss Pattern File Half Round Cut 1

Ergo Grip Swiss Pattern File Half Round Cut 1

Ergo Grip Swiss Pattern File Half Round Cut 1 - Length of cut is 4″ (10 cm) and the overall length is 8-1/2″ (22 cm). For a complete set of 5, see part number 33831 (cut 00) or 33832 (cut 1). These strong, durable files are ideal for a variety of uses. Ergo grip files offer the craftsman something different precision files designed for those “in-between” jobs, too big for needle files and requiring finer control than a larger, heavier file can deliver. The distinctive design includes a built-in handle, so there’s no separate handle to buy and they’re shaped for easy handling and balanced for efficient cutting. . 15/32″ wide x 9/64″ thick.

 

Teborg Swiss Pattern Needle Files Assorted Set of 12 Fine

Teborg Swiss Pattern Needle Files Assorted Set of 12 Fine

Teborg Swiss Pattern Needle Files Assorted Set of 12 Fine - Set of 12 assorted needle files in a plastic pouch fine cut economical, 5-1/2 inch, cut portion is 3 inches. Used by professionals. “Swiss pattern” files means a type of fine file used for precision filing of jewelry, instrument parts, and dies it does not necessarily mean that all “swiss pattern” files are swiss made.