15 Top Cutter Cs

 

CK T4358 12 Bolt Cutter by CK

C.K T4358 12 Bolt Cutter by C.K

C.K T4358 12 Bolt Cutter by C.K - Compact cutters ideal for fencinghot drop forged chrome vanadium steel jawscompound action mechanism applies extreme cutting forcesuse for cutting round material and hard wiremeasures 6 mm diameter by 300 mm length.

 

CS Osborne Grommet Cutter No500-6A Setter No 217 -6 Tool Kit MPN 13256-51624

C.S. Osborne Grommet Cutter (No.500-6A) & Setter (No. 217 -6) Tool Kit MPN #13256-51624

C.S. Osborne Grommet Cutter (No.500-6A) & Setter (No. 217 -6) Tool Kit MPN #13256-51624 - Mpn #13256 & #51624 made in usa. Size 6 grommets have a 3/4″ diameter hole when set in, 1505″ out side diameter, and 0420″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. This kit includes no 217-6 plain grommet setting die and no 500 -6a grommet hole cutter. Setter male sits flat on base for perfectly set plain grommets .

 

Ridgid 74700 468C 6-8 HINGE CUTTER--C

Ridgid 74700 468C 6-8 HINGE CUTTER–C

Ridgid 74700 468C 6-8 HINGE CUTTER–C - Equipped with 4 cutter wheels. Designed for rapid cutting of 2″ through 12″ steel pipe. Operates where minimal cutter rotation is necessary due to lack of space.

 

Wheeler Rex 039-802084 Shell Cutter for C-900 Plastic 1-12

Wheeler Rex 039-802084 Shell Cutter for C-900 Plastic, 1-1/2″

Wheeler Rex 039-802084 Shell Cutter for C-900 Plastic, 1-1/2″ - 1-1/2″ shell cutter for c-900 plastic. The adapter has a handy built in bleed-off valve. Allows for drilling into active water, air, gas and sewer lines up to 250 psi wither in a vertical, horizontal, or other pipe orientation. Allowing for tapping into a line while under pressure and adding a line, drain the system or add a sensor. Works with the highly thought out and well designed the 8100 or 8300 wheeler rex hot tap drilling machines.

 

1212-34 CS OSBORNE FOAM CUTTERS

1212-3/4 C.S. OSBORNE FOAM CUTTERS

1212-3/4 C.S. OSBORNE FOAM CUTTERS - Cuts up to 30 buttons at a time. For use in a drill press or with a hand held standard electric drill. For soft materials only. Osborne no. Extremely sharp carbonized cutting edge. 1212 foam cutter polished, high quality and sharpened with the best technique.

 

NT Cutter Fabric Circle Cutter 1-316 Inches ~ 8-1116 Inches diameter 1 Cutter C-2000P

NT Cutter Fabric Circle Cutter, 1-3/16 Inches ~ 8-11/16 Inches diameter, 1 Cutter (C-2000P)

NT Cutter Fabric Circle Cutter, 1-3/16 Inches ~ 8-11/16 Inches diameter, 1 Cutter (C-2000P) - Made in japan. This circle cutter includes (1) extra durable rotary blade, br-18 and has a built in storage compartment to hold spare blades. Good for quilt making, applique, walnut button, scrapbooking, etc. Unique fabric circle cutter leaves no center pin mark. Do not try to cut with just one turn. Hold the center point firmly down and slowly turn end in the direction of the cutting edge. Nt circle cutter with rotary blade makes a great fabric cutting tool. Ideal for crafts and projects that involves cutting felt, denim, lace, soft film, etc. By turning the cutter several times over the surface, you will have better results. Circle can range from 1-3/16″ ~ 8-11/16″ diameter. Special rotary blade is made of premium quality chromium and tungsten added to carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Rotary blade cuts without twisting fabric.

 

CR LAURENCE PTC1903 CRL Replacement Roller and Housing for PTC Series Production T-Cutters by CR Laurence

C.R. LAURENCE PTC1903 CRL Replacement Roller and Housing for PTC Series Production T-Cutters by C.R. Laurence

C.R. LAURENCE PTC1903 CRL Replacement Roller and Housing for PTC Series Production T-Cutters by C.R. Laurence - Mini trimming shears are perfect for bonsai, pruning houseplants also very handy for the fisherman’s tackle box, sewing box, etc. Can be used anywhere that needs a quick trim. Cr laurence ptc1903 crl replacement roller and housing for ptc series production t-cutters. Super handy, you’ll want to keep these in several places so that they’re always at hand for a quick snip. Precision ground and very sharp to preserve the fine edges, please don¡¯t use it to cut wire.

 

Wheeler Rex 039-802085 Shell Cutter for C-900 Plastic 2

Wheeler Rex 039-802085 Shell Cutter for C-900 Plastic, 2″

Wheeler Rex 039-802085 Shell Cutter for C-900 Plastic, 2″ - The adapter has a handy built in bleed-off valve. Allowing for tapping into a line while under pressure and adding a line, drain the system or add a sensor. 2″ shell cutter for c-900 plastic. Works with the highly thought out and well designed the 8100 or 8300 wheeler rex hot tap drilling machines. Allows for drilling into active water, air, gas and sewer lines up to 250 psi wither in a vertical, horizontal, or other pipe orientation.

 

CS Osborne Grommet Cutter No500-00A Setter No 216 -00 Tool Kit -Size 00 MPN 13212-51610

C.S. Osborne Grommet Cutter (No.500-00A) & Setter (No. 216 -00) Tool Kit -Size 00 MPN #13212-51610

C.S. Osborne Grommet Cutter (No.500-00A) & Setter (No. 216 -00) Tool Kit -Size 00 MPN #13212-51610 - Grommet dies and cutters should be used with an osborne rawhide hammer or wooden mallet, not with a steel hammer we recommend csosborne & co no 395 rawhide hammers for this purpose mallet not included. Setter male sits flat on base for perfectly set plain grommets . Mpn #13212 & #51610 made in usa. Size 00 grommets have a 3/16″ diameter hole when set in, 0460 ” out side diameter, and 0135″ length under flange osborne grommet dies are numbered to correspond with standard size grommets grommets not included . This kit includes no 216 -00 plain grommet setting die and no 500 -00a grommet hole cutter.

 

NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters 10-Blade per Pack BC-400P

NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters, 10-Blade per Pack (BC-400P)

NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters, 10-Blade per Pack (BC-400P) - Made in japan. Blades for heavy duty circle cutters (c-2500p, c-3000gp, cl-100p) and mat board cutter (ol-7000gp). 10ea per pack. Made of high quality carbon tool steel. Packed in hanging plastic case. Cutting material foamboard, matboard, soft film, leather, thin rubber sheet, card stock, any other thin material. 9mm w x 20mm l x 1mm t.

 

CK T3888 Ecotronic ESD Relieved Side Cutters by CK

C.K T3888 Ecotronic ESD Relieved Side Cutters by C.K

C.K T3888 Ecotronic ESD Relieved Side Cutters by C.K - 06 inch (1,6 mm) diameter / suitable for useeasy comfort with repeating return for workelectrostatically handles ableitwiderstand 10-dissipativesharp, precision ground cutting edges with an extra full flush cutspecial tool steel blade, hardened for long-term cutting performanceelecro-static discharging handles, dissipative 1contoured, dual component handle design for comfortable workinblack oxidised finish for corrosion resistance and reduced glare. Precision pliers for fine schneidanwendungensharp blades with precision-sharpened for flush cuttingfor cutting soft-free copper wires up to 14awg 0.

 

MK Morse CSM1481STC Metal Devil 14 Stud Cutter Circular Saw Blade Model CSM1481STC Hardware Store

MK Morse CSM1481STC Metal Devil 14 Stud Cutter Circular Saw Blade, Model: CSM1481STC, Hardware Store

MK Morse CSM1481STC Metal Devil 14 Stud Cutter Circular Saw Blade, Model: CSM1481STC, Hardware Store - The unique optimized tooth geometry allows less tooth chippage and longer blade life. The unique gullet design maximizes tooth strength which eliminates tooth damage, yields longer. The optimized blade design reduces vibration resulting in longer blade life, reduced operator.

 

CRL Nozzle Cutter by CR Laurence

CRL Nozzle Cutter by C.R. Laurence

CRL Nozzle Cutter by C.R. Laurence - Use on all plastic cartridges to cut nozzle tip and threaded tip.

 

CK T3884 Ecotronic ESD Micro Reverse Cut Side Cutters by CK

C.K T3884 Ecotronic ESD Micro Reverse Cut Side Cutters by C.K

C.K T3884 Ecotronic ESD Micro Reverse Cut Side Cutters by C.K - Lightweight precision pliers for fine micro-schneidanwendungen (e. G. Electronics and fine mechanics)sharp blades with precision-sharpened for flush cuttingfor cutting soft-free copper wires up to 0. 05 inch (1,3 mm) diameter / 16awg. Easy comfort with repeating return for workelectrostatically handles ableitwiderstand 10-dissipativesharp, precision ground cutting edges with an extra full flush cutspecial tool steel blade, hardened for long-term cutting performanceelecro-static discharging handles, dissipative 1contoured, dual component handle design for comfortable workinblack oxidised finish for corrosion resistance and reduced glare.

 

NT Cutter Compass Circle Cutter 1316 Inches ~ 5-78 Inches diameter 1 Cutter C-400P

NT Cutter Compass Circle Cutter, 13/16 Inches ~ 5-7/8 Inches diameter, 1 Cutter (C-400P)

NT Cutter Compass Circle Cutter, 13/16 Inches ~ 5-7/8 Inches diameter, 1 Cutter (C-400P) - Good for art & craft projects such as scrapbooking, etc. Compact small circle cutter will smoothly cut a 1 inch circle. Nt compass circle cutter for scrapbooking or other craft projects. This convenient little craft circle cutter comes with (5) 45 degree refill blades. Simple-to-use circle cutter for paper is perfect for making crafts, models & other light-duty jobs. Made in japan. These professional blades are made of high quality carbon tool steel and produced through multiple stages of precise process to obtain the ultimate sharpness and optimum edge-retention. Circle can range from 13/16″ ~ 5-7/8″ diameter.